journal article·2023-03-16Open access

Effect of Anti-COVID-19 Mouthwashes on Shear Bond Strength of Resin-Matrix Ceramics Repaired with Resin Composite Using Universal Adhesive: An In Vitro Study

Wichuda Limsiriwong, Awiruth Klaisiri, Nantawan Krajangta

Abstract

Using anti-COVID-19 mouthwashes has become necessary to reduce acute respiratory syndrome coronavirus 2 (SARS-CoV-2) transmissions. Resin-matrix ceramic (RMCs) materials that are exposed to mouthwashes may affect the bonding of repaired materials. This research was performed to assess the effects of anti-COVID-19 mouthwashes on the shear bond strengths (SBS) of RMCs repaired with resin composites. A total of 189 rectangular specimens of two different RMCs (Vita Enamic (VE) and Shofu Block HC (ShB)) were thermocycled and randomly divided into nine subgroups according to different mouthwashes (distilled water (DW), 0.2% povidone–iodine (PVP-I), and 1.5% hydrogen peroxide (HP)) and surface treatment protocols (no surface treatment, hydrofluoric acid etching (HF), and sandblasting (SB)). A repair protocol for RMCs was performed (using universal adhesives and resin composites), and the specimens were assessed using an SBS test. The failure mode was examined using a stereomicroscope. The SBS data were evaluated using a three-way ANOVA and a Tukey post hoc test. The SBS were significantly affected by the RMCs, mouthwashes, and surface treatment protocols. Both surface treatment protocols (HF and SB) for both RMCs, whether immersed in anti-COVID-19 mouthwash or not, improved the SBS. For the VE immersed in HP and PVP-I, the HF surface treatment had the highest SBS. For the ShB immersed in HP and PVP-I, the SB surface treatment had the highest SBS.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Dental Research and COVID-19 · Scientific and Engineering Research Topics · Dental materials and restorations

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Division of Restorative Dentistry, Faculty of Dentistry, Thammasat University, Pathum Thani 12120, Thailand

Thammasat University Research Unit in Restorative and Esthetic Dentistry, Thammasat University, Pathum Thani 12120, Thailand

Funding

the Thammasat University Research Unit in Restorative and Esthetic Dentistry

References (48)

Show source-provided references
1. Clinical Significance of a High SARS-CoV-2 Viral Load in the Saliva10.3346/jkms.2020.35.e195 ↗
2. Consistent Detection of 2019 Novel Coronavirus in Saliva10.1093/cid/ciaa149 ↗
3. Aerosols and splatter in dentistry: A brief review of the literature and infection control implications10.14219/jada.archive.2004.0207 ↗
4. Transmission routes of 2019-nCoV and controls in dental practice10.1038/s41368-020-0075-9 ↗
5. Antiviral Activity of Reagents in Mouth Rinses against SARS-CoV-210.1177/0022034520967933 ↗
6. Oral Mucosa, Saliva, and COVID-19 Infection in Oral Health Care10.3389/fmed.2021.656926 ↗
7. Current ceramic materials and systems with clinical recommendations: A systematic review10.1016/S0022-3913(07)60124-3 ↗
8. Resin-composite blocks for dental CAD/CAM applications10.1177/0022034514553976 ↗
9. Mechanical properties of polymer-infiltrated-ceramic-network materials10.1016/j.dental.2013.01.002 ↗
10. Repair of restorations--criteria for decision making and clinical recommendations10.1016/j.dental.2012.07.006 ↗
11. Effect of different ceramic surface treatments on resin microtensile bond strength10.1111/j.1532-849X.2004.04007.x ↗
12. Defective dental restorations: To repair or not to repair? Part 2: All-ceramics and porcelain fused to metal systems10.12968/denu.2011.38.3.150 ↗
13. Repair vs. replacement of failed restorations in general dental practice: Factors influencing treatment choices and outcomes10.1038/sj.bdj.2014.1165 ↗
14. Effect of antioxidant agents on bond strength of composite to bleached enamel with 38% hydrogen peroxide10.1590/S1516-14392011005000031 ↗
15. Effects of chlorhexidine and povidone-iodine mouth rinses on the bond strength of an orthodontic composite
16. The effect of SARS-CoV-2 effective mouthwashes on the staining, translucency and surface roughness of a nanofill resin composite
17. A comparative effect of mouthwashes with different alcohol concentrations on surface hardness, sorption and solubility of composite resins
18. Color stability, surface roughness and microhardness of composites submitted to mouthrinsing action10.1590/S1678-77572012000200013 ↗
19. In vitro effects of alcohol-containing mouthwashes on human enamel and restorative materials10.1590/1807-3107bor-2018.vol32.0025 ↗
20. Influence of preprocedural antiseptic mouthrinses against COVID-19 on enamel/dentin bond strength of a universal adhesive10.1080/01694243.2021.1885904 ↗
21. How does antiseptic mouthwashes against SARS-COV-2 affect the bond strength of universal adhesive to enamel?10.1002/jemt.24028 ↗
22. Repair bond strength of resin composite to a novel CAD/CAM hybrid ceramic using different repair systems10.4012/dmj.2014-159 ↗
23. The durability of zirconia/resin composite shear bond strength using different functional monomer of universal adhesives10.1055/s-0041-1736331 ↗
24. Fouquet, V., Lachard, F., Abdel-Gawad, S., Dursun, E., Attal, J.P., and François, P. (2022). Shear Bond Strength of a Direct Resin Composite to CAD-CAM Composite Blocks: Relative Contribution of Micromechanical and Chemical Block Surface Treatment. Materials, 15.10.3390/ma15145018 ↗
25. Influence of different universal adhesives on the repair performance of hybrid CAD-CAM materials10.5395/rde.2019.44.e23 ↗
26. The use of silane coupling agents on lithium disilicate glass ceramic repaired with resin composite
27. Shear bond strength of different functional monomer in universal adhesives at the resin composite/base metal alloys interface
28. Baldi, A., Carossa, M., Comba, A., Alovisi, M., Femiano, F., Pasqualini, D., Berutti, E., and Scotti, N. (2022). Wear Behaviour of Polymer-Infiltrated Network Ceramics, Lithium Disilicate and Cubic Zirconia against Enamel in a Bruxism-Simulated Scenario. Biomedicines, 10.10.3390/biomedicines10071682 ↗
29. Arkoy, S., and Ulusoy, M. (2022). Effect of Different Surface Treatments on Repair Bond Strength of CAD/CAM Resin-Matrix Ceramics. Materials, 15.10.3390/ma15186314 ↗
30. Replacement versus repair of defective restorations in adults: Resin composite
31. Porcelain repair—Influence of different systems and surface treatments on resin bond strength10.4047/jap.2015.7.5.343 ↗
32. Shear bond strength of a new self-adhering flowable composite resin for lithium disilicate-reinforced CAD/CAM ceramic material10.4047/jap.2014.6.6.434 ↗
33. Shear bond strength of veneering ceramic to coping materials with different pre-surface treatments10.4047/jap.2016.8.5.339 ↗
34. Klaisiri, A., Maneenacarith, A., Jirathawornkul, N., Suthamprajak, P., Sriamporn, T., and Thamrongananskul, N. (2022). The effect of multiple applications of phosphate-containing primer on shear bond strength between zirconia and resin composite. Polymers, 14.10.3390/polym14194174 ↗
35. Klaisiri, A., Phumpatrakom, P., and Thamrongananskul, N. (2022). Chemical surface modification methods of resin composite repaired with resin-modified glass-ionomer cement. Eur. J. Dent, ahead of print.10.1055/s-0042-1755627 ↗
36. Leelaponglit, S., Maneenacarith, A., Wutikhun, T., and Klaisiri, A. (2023). The various silane agents in universal adhesives on repair strength of resin composite to resin composite. J. Compos. Sci., 7.10.3390/jcs7010007 ↗
37. Koenig, A., Schmidtke, J., Schmohl, L., Schneider-Feyrer, S., Rosentritt, M., Hoelzig, H., Kloess, G., Vejjasilpa, K., Schulz-Siegmund, M., and Fuchs, F. (2021). Characterisation of the Filler Fraction in CAD/CAM Resin-Based Composites. Materials, 14.10.3390/ma14081986 ↗
38. Repair bond strengths of non-aged and aged resin nanoceramics10.4047/jap.2017.9.5.364 ↗
39. Comparison of In Vitro Inactivation of SARS CoV-2 with Hydrogen Peroxide and Povidone-Iodine Oral Antiseptic Rinses10.1111/jopr.13220 ↗
40. Effect of surface treatments on shear bond strength of resin composite bonded to CAD/CAM resin-ceramic hybrid materials10.4047/jap.2016.8.4.259 ↗
41. Repairability of CAD/CAM high-density PMMA- and composite-based polymers10.1007/s00784-015-1411-x ↗
42. From Artisanal to CAD-CAM Blocks: State of the Art of Indirect Composites10.1177/0022034516634286 ↗
43. A new classification system for all-ceramic and ceramic-like restorative materials10.11607/ijp.4244 ↗
44. Adhesive Bonding to Hybrid Materials: An Overview of Materials and Recommendations
45. Resin-ceramic bonding: A review of the literature10.1067/mpr.2003.50 ↗
46. Tanthanuch, S., Kukiattrakoon, B., Naiyanart, C., Promtong, T., Yothinwatthanabamrung, P., and Pumpua, S. (2022). Effect of Mouthwashes for COVID-19 Prevention on Surface Changes of Resin Composites. Int. Dent. J., 20, ahead of print.10.1016/j.identj.2022.10.004 ↗
47. Effect of 2% iodine disinfecting solution on bond strength to dentin10.1590/S1678-77572006000600003 ↗
48. Recent Developments and Potential Challenges in Dealing with Internal and External Surfaces of Glass Matrix and Resin Matrix Ceramic Materials