journal article·2023-01-31Open access

Thermal Behavior of Graphene Oxide Deposited on 3D-Printed Polylactic Acid for Photothermal Therapy: An Experimental–Numerical Analysis

Jesús Vence, Christian Gil, Laura González-Rodríguez, Miriam López-Álvarez

Abstract

The present work evaluates the thermal behavior of graphene oxide (GO) when deposited on 3D-printed polylactic acid (PLA), in order to develop a medical device for photothermal therapy applications. An experimental–numerical analysis was performed to assess the photothermal conversion capacity, based on the power emitted by a NIR (785 nm) laser, and the subsequent temperature distribution on the GO-PLA material. The influence of the deposited mass of GO and the PLA thickness was studied through 40 different scenarios. The results estimated a value of photothermal conversion efficiency of up to 32.6%, achieved for the lower laser power density that was tested (0.335 mW/mm²), and a high mass value of deposited GO (1.024 × 10−3 mg/mm²). In fact, an optimal mass of GO in the range of 1.024–2.048 × 10−3 mg/mm2 is proposed, in terms of absorption capacity, since a higher mass of GO would not increase the conversion efficiency. Moreover, the study allowed for an estimation of the thermal conductivity of this specific biomaterial (0.064 W/m·K), and proved that a proper combination of GO mass, PLA thickness, and laser power can induce ablative (>60 °C, in a concentrated area), moderate (50 °C), and mild (43 °C) hyperthermia on the bottom face of the biomaterial.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Nanoplatforms for cancer theranostics · Graphene and Nanomaterials Applications · Bone Tissue Engineering Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

CINTECX, Universidade de Vigo, Campus Universitario Lagoas-Marcosende, 36310 Vigo, Spain

Funding

CINTECX (Universidade de Vigo, Vigo, Spain) · projects BIOHEAT · GRC support program

References (31)

Show source-provided references
1. Biosynthesis of silver nanoparticles with antimicrobial and anticancer properties using two novel yeasts10.1038/s41598-021-95262-6 ↗
2. O’Neill, J. (2016). Tackling Drug-Resistant Infections Globally: Final Report and Recommendations, Government of the United Kingdom.
3. Black Phosphorus Nanosheets for Mild Hyperthermia-Enhanced Chemotherapy and Chemo-Photothermal Combination Therapy10.7150/ntno.18767 ↗
4. Recent Developments of Phototherapy Based on Graphene Family Nanomaterials10.2174/0929867323666161019141817 ↗
5. Au Nanorod Design as Light-Absorber in the First and Second Biological Near-Infrared Windows for In Vivo Photothermal Therapy10.1021/nn401187c ↗
6. Phototherapy and optical waveguides for the treatment of infection10.1016/j.addr.2021.114036 ↗
7. Gollavelli, G., Ghule, A.V., and Ling, Y.-C. (2022). Multimodal Imaging and Phototherapy of Cancer and Bacterial Infection by Graphene and Related Nanocomposites. Molecules, 27.10.3390/molecules27175588 ↗
8. Clinical development and potential of photothermal and photodynamic therapies for cancer10.1038/s41571-020-0410-2 ↗
9. Antibody assisted graphene oxide coated gold nanoparticles for rapid bacterial detection and near infrared light enhanced antibacterial activity10.1016/j.snb.2020.129141 ↗
10. Polydopamine Nanocoating for Effective Photothermal Killing of Bacteria and Fungus upon Near-Infrared Irradiation10.1002/admi.201600767 ↗
11. Near-infrared emitting graphene quantum dots synthesized from reduced graphene oxide for in vitro/in vivo/ex vivo bioimaging applications10.1088/2053-1583/abe4e3 ↗
12. Targeted Nanomaterials for Phototherapy10.7150/ntno.17694 ↗
13. Light-Responsive Nanomaterials for Cancer Therapy10.1016/j.eng.2021.07.023 ↗
14. Van-mediated self-aggregating photothermal agents combined with multifunctional magnetic nickel oxide nanoparticles for precise elimination of bacterial infections10.1186/s12951-022-01535-1 ↗
15. Gold nanostars for cancer cell-targeted SERS-imaging and NIR light-triggered plasmonic photothermal therapy (PPTT) in the first and second biological windows10.1039/C9TB00061E ↗
16. Organic molecule-based photothermal agents: An expanding photothermal therapy universe10.1039/C7CS00522A ↗
17. Recent advances in functional nanomaterials for light–triggered cancer therapy10.1016/j.nantod.2018.02.010 ↗
18. Determination of photothermal conversion efficiency of graphene and graphene oxide through an integrating sphere method10.1016/j.carbon.2016.02.075 ↗
19. Biodegradable polyurethane/graphene oxide scaffolds for soft tissue engineering: In vivo behavior assessment10.1080/00914037.2019.1655754 ↗
20. Șelaru, A., Herman, H., Vlăsceanu, G.M., Dinescu, S., Gharbia, S., Baltă, C., Roșu, M., Mihali, C.V., Ioniță, M., and Serafim, A. (2022). Graphene-Oxide Porous Biopolymer Hybrids Enhance In Vitro Osteogenic Differentiation and Promote Ectopic Osteogenesis In Vivo. Int. J. Mol. Sci., 23.10.3390/ijms23010491 ↗
21. Graphene Oxide/Polymer-Based Biomaterials10.1002/adem.201700627 ↗
22. Pérez Davila, S., González Rodríguez, L., Lama, R., López-Álvarez, M., Oliveira, A.L., Serra, J., Novoa, B., Figueras, A., and González, P. (2022). 3D-Printed PLA Medical Devices: Physicochemical Changes and Biological Response after Sterilisation Treatments. Polymers, 14.10.3390/polym14194117 ↗
23. Pérez Davila, S., González Rodríguez, L., Chiussi, S., Serra, J., and González, P. (2021). How to sterilize polylactic acid based medical devices?. Polymers, 13.10.3390/polym13132115 ↗
24. Amino-modified graphene oxide nanoplatelets for photo-thermal and anti-bacterial capability10.1016/j.surfcoat.2020.125441 ↗
25. Cuiffo, M.A., Snyder, J., Elliott, A.M., Romero, N., Kannan, S., and Halada, G.P. (2017). Impact of the Fused Deposition (FDM) Printing Process on Polylactic Acid (PLA) Chemistry and Structure. Appl. Sci., 7.10.20944/preprints201704.0010.v1 ↗
26. Shalwan, A., Alajmi, A., and Yousif, B.F. (2022). Theoretical Study of the Effect of Fibre Porosity on the Heat Conductivity of Reinforced Gypsum Composite Material. Polymers, 14.10.3390/polym14193973 ↗
27. Li, R., Qiu, Y., Zheng, Q., Liu, B., Chen, S., and Tian, Y. (2018). Finite Element Simulation of Temperature and Stress Field for Laser Cladded Nickel-Based Amorphous Composite Coatings. Coatings, 8.10.3390/coatings8100336 ↗
28. Preparation and Characterization of PLA Film/3D Printing Composite Scaffold for Tissue Engineering Application10.1007/s12221-020-9305-1 ↗
29. Characterization of the anisotropic thermal conductivity of additively manufactured components by fused filament fabrication10.1007/s40964-019-00098-2 ↗
30. Fabrication and evaluation of bone morphogenetic protein-2 microspheres coated black phosphorus nanosheets@polylactic-glycolic acid copolymers scaffold: A multifunctional antibacterial photothermal scaffold for bone regeneration10.1016/j.ijbiomac.2022.05.028 ↗
31. Graphene oxide modified PLA microcapsules containing gold nanoparticles for ultrasonic/CT bimodal imaging guided photothermal tumor therapy10.1016/j.biomaterials.2013.03.027 ↗