journal article·2023-03-15Open access

A Machine-Learning-Based Approach for Predicting Mechanical Performance of Semi-Porous Hip Stems

Khaled Akkad, Hassan Mehboob, Rakan Alyamani, Faris Tarlochan

Abstract

Novel designs of porous and semi-porous hip stems attempt to alleviate complications such as aseptic loosening, stress shielding, and eventual implant failure. Various designs of hip stems are modeled to simulate biomechanical performance using finite element analysis; however, these models are computationally expensive. Therefore, the machine learning approach is incorporated with simulated data to predict the new biomechanical performance of new designs of hip stems. Six types of algorithms based on machine learning were employed to validate the simulated results of finite element analysis. Afterwards, new designs of semi-porous stems with outer dense layers of 2.5 and 3 mm and porosities of 10–80% were used to predict the stiffness of the stems, stresses in outer dense layers, stresses in porous sections, and factor of safety under physiological loads using machine learning algorithms. It was determined that decision tree regression is the top-performing machine learning algorithm as per the used simulation data in terms of the validation mean absolute percentage error which equals 19.62%. It was also found that ridge regression produces the most consistent test set trend as compared with the original simulated finite element analysis results despite relying on a relatively small data set. These predicted results employing trained algorithms provided the understanding that changing the design parameters of semi-porous stems affects the biomechanical performance without carrying out finite element analysis.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Orthopaedic implants and arthroplasty · Asphalt Pavement Performance Evaluation · Electrical and Bioimpedance Tomography

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Engineering Management, Prince Sultan University, P.O. Box 66833, Riyadh 11586, Saudi Arabia

Department for Mechanical and Industrial Engineering, Qatar University, Doha 2713, Qatar

Funding

Qatar National Research Fund

References (41)

Show source-provided references
1. Problem of stress shielding and improvement to the hip Implat designs: A review10.3923/jms.2007.460.467 ↗
2. Long-term implant fixation and stress-shielding in total hip replacement10.1016/j.jbiomech.2014.12.021 ↗
3. Savio, D., and Bagno, A. (2022). When the total hip replacement fails: A review on the stress-shielding effect. Processes, 10.10.3390/pr10030612 ↗
4. Computational and experimental studies on the corrosion inhibition performance of an aerial extract of Cnicus Benedictus weed on the acidic corrosion of mild steel10.1016/j.psep.2022.03.082 ↗
5. Fully porous 3D printed titanium femoral stem to reduce stress-shielding following total hip arthroplasty10.1002/jor.23445 ↗
6. Additive manufacturing structural redesign of hip prostheses for stress-shielding reduction and improved functionality and safety10.1016/j.mechmat.2021.104173 ↗
7. Titanium as the material of choice for cementless femoral components in total hip arthroplasty
8. Biocompatibility of advanced manufactured titanium implants—A review10.3390/ma7128168 ↗
9. Biocompatibility of Ti-6Al-4V titanium alloy implants with laser microgrooved surfaces10.1080/10667857.2020.1816011 ↗
10. Finite element study of functionally graded porous femoral stems incorporating body-centered cubic structure10.1111/aor.13444 ↗
11. Finite element modelling and characterization of 3D cellular microstructures for the design of a cementless biomimetic porous hip stem10.1016/j.matdes.2018.04.002 ↗
12. A novel design, analysis and 3D printing of Ti-6Al-4V alloy bio-inspired porous femoral stem10.1007/s10856-020-06420-7 ↗
13. Properties and applications of additively manufactured metallic cellular materials: A review
14. Finite element analysis of porous titanium alloy hip stem to evaluate the biomechanical performance during walking and stair climbing10.1007/s42235-019-0122-4 ↗
15. Biomechanical design of a composite femoral prosthesis to investigate the effects of stiffness, coating length, and interference press fit10.1016/j.compstruct.2018.08.011 ↗
16. Detecting total hip replacement prosthesis design on plain radiographs using deep convolutional neural network10.1002/jor.24617 ↗
17. Multiscale methodology for bone remodelling simulation using coupled finite element and neural network computation10.1007/s10237-010-0222-x ↗
18. Predicting bone regeneration from machine learning10.1038/s43588-021-00116-w ↗
19. Murphy, K.P. (2012). Machine Learning: A Probabilistic Perspective, MIT Press.
20. Cilla, M., Borgiani, E., Martínez, J., Duda, G.N., and Checa, S. (2017). Machine learning techniques for the optimization of joint replacements: Application to a short-stem hip implant. PLoS ONE, 12.10.1371/journal.pone.0183755 ↗
21. Machine Learning for industrial applications: A comprehensive literature review10.1016/j.eswa.2021.114820 ↗
22. Kanakaris, N., Karacapilidis, N., Kournetas, G., and Lazanas, A. (2019). International Conference on Operations Research and Enterprise Systems, Springer.
23. Ashfaq, T., Khalid, R., Yahaya, A.S., Aslam, S., Azar, A.T., Alsafari, S., and Hameed, I.A. (2022). A Machine Learning and Blockchain Based Efficient Fraud Detection Mechanism. Sensors, 22.10.3390/s22197162 ↗
24. Literature review: Machine learning techniques applied to financial market prediction10.1016/j.eswa.2019.01.012 ↗
25. Sharma, N., Thakur, M.S., Sihag, P., Malik, M.A., Kumar, R., Abbas, M., and Saleel, C.A. (2022). Machine learning techniques for evaluating concrete strength with waste marble powder. Materials, 15.10.2139/ssrn.4156891 ↗
26. Upadhya, A., Thakur, M.S., Al Ansari, M.S., Malik, M.A., Alahmadi, A.A., Alwetaishi, M., and Alzaed, A.N. (2022). Marshall Stability Prediction with Glass and Carbon Fiber Modified Asphalt Mix Using Machine Learning Techniques. Materials, 15.10.3390/ma15248944 ↗
27. Predicting Mental Health of Best Human Capital for Sustainable Organization through Psychological and Personality Health Issues: Shift from Traditional to Novel Machine Learning-Supervised Technique Approach10.1155/2022/5775640 ↗
28. Prediction of osteoporotic hip fracture in postmenopausal women through patient-specific FE analyses and machine learning10.1016/j.cmpb.2020.105484 ↗
29. Using artificial neural networks to predict impingement and dislocation in total hip arthroplasty10.1080/10255842.2020.1757661 ↗
30. Research on prediction of contact stress of acetabular lining based on principal component analysis and support vector regression10.1080/13102818.2021.1892523 ↗
31. Al Zoubi, N.F., Tarlochan, F., and Mehboob, H. (2022). Mechanical and Fatigue Behavior of Cellular Structure Ti-6Al-4V Alloy Femoral Stems: A Finite Element Analysis. Appl. Sci., 12.10.3390/app12094197 ↗
32. Array programming with NumPy10.1038/s41586-020-2649-2 ↗
33. Scikit-learn: Machine learning in Python
34. Bulbul, A.M.R., Khan, K., Nafees, A., Amin, M.N., Ahmad, W., Usman, M., Nazar, S., and Arab, A.M.A. (2022). In-Depth Analysis of Cement-Based Material Incorporating Metakaolin Using Individual and Ensemble Machine Learning Approaches. Materials, 15.10.3390/ma15217764 ↗
35. Shaban, M., Alsharekh, M.F., Alsunaydih, F.N., Alateyah, A.I., Alawad, M.O., BaQais, A., Kamel, M., Nassef, A., El-Hadek, M.A., and El-Garaihy, W.H. (2022). Investigation of the Effect of ECAP Parameters on Hardness, Tensile Properties, Impact Toughness, and Electrical the Conductivity of Pure Cu through Machine Learning Predictive Models. Materials, 15.10.3390/ma15249032 ↗
36. Ogutu, J.O., Schulz-Streeck, T., and Piepho, H.-P. (2012). BMC Proceedings, Springer.
37. Artificial neural networks (the multilayer perceptron)—A review of applications in the atmospheric sciences10.1016/S1352-2310(97)00447-0 ↗
38. Guido, V.R., and Drake, F. (2009). Python 3 Reference Manual, CreateSpace.
39. Development of a porous metallic femoral stem: Design, manufacturing, simulation and mechanical testing10.1016/j.matdes.2016.10.064 ↗
40. Stiffness and strength tailoring of cobalt chromium graded cellular structures for stress-shielding reduction10.1016/j.matdes.2016.11.090 ↗
41. A numerical investigation into the influence of the properties of cobalt chrome cellular structures on the load transfer to the periprosthetic femur following total hip arthroplasty10.1016/j.medengphy.2014.02.008 ↗