journal article·2024-06-14Open access

Silver-Doped Titanium Oxide Layers for Improved Photocatalytic Activity and Antibacterial Properties of Titanium Implants

Aya Ali, Likhitha Polepalli, Sheetal Chowdhury, Mary A. Carr, Amol V. Janorkar, Mary E. Marquart, Jason A. Griggs, Joel D. Bumgardner, Michael D. Roach

Abstract

Titanium has a long history of clinical use, but the naturally forming oxide is not ideal for bacterial resistance. Anodization processes can modify the crystallinity, surface topography, and surface chemistry of titanium oxides. Anatase, rutile, and mixed phase oxides are known to exhibit photocatalytic activity (PCA)-driven bacterial resistance under UVA irradiation. Silver additions are reported to enhance PCA and reduce bacterial attachment. This study investigated the effects of silver-doping additions to three established anodization processes. Silver doping showed no significant influence on oxide crystallinity, surface topography, or surface wettability. Oxides from a sulfuric acid anodization process exhibited significantly enhanced PCA after silver doping, but silver-doped oxides produced from phosphoric-acid-containing electrolytes did not. Staphylococcus aureus attachment was also assessed under dark and UVA-irradiated conditions on each oxide. Each oxide exhibited a photocatalytic antimicrobial effect as indicated by significantly decreased bacterial attachment under UVA irradiation compared to dark conditions. However, only the phosphorus-doped mixed anatase and rutile phase oxide exhibited an additional significant reduction in bacteria attachment under UVA irradiation as a result of silver doping. The antimicrobial success of this oxide was attributed to the combination of the mixed phase oxide and higher silver-doping uptake levels.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Bone Tissue Engineering Materials · Dental materials and restorations · TiO2 Photocatalysis and Solar Cells

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

University of Mississippi Medical Center, Department of Biomedical Materials Science, Jackson, MS 39216, USA

University of Mississippi Medical Center, Department of Cell and Molecular Biology, School of Medicine, Jackson, MS 39216, USA

Department of Biomedical Engineering, University of Memphis, Memphis, TN 38152, USA

References (58)

Show source-provided references
1. Shahid, A., Aslam, B., Muzammil, S., Aslam, N., Shahid, M., Almatroudi, A., Allemailem, K.S., Saqalein, M., Nisar, M.A., and Rasool, M.H. (2021). The prospects of antimicrobial coated medical implants. J. Appl. Biomater. Funct. Mater., 19.10.1177/22808000211040304 ↗
2. Antibacterial and immunogenic behavior of silver coatings on additively manufactured porous titanium10.1016/j.actbio.2018.09.051 ↗
3. Photofunctionalization of anodized titanium surfaces using UVA or UVC light and its effects against Streptococcus sanguinis10.1002/jbm.b.34033 ↗
4. Liu, J., Liu, J., Attarilar, S., Wang, C., Tamaddon, M., Yang, C., Xie, K., Yao, J., Wang, L., and Liu, C. (2020). Nano-Modified Titanium Implant Materials: A Way Toward Improved Antibacterial Properties. Front. Bioeng. Biotechnol., 8.10.3389/fbioe.2020.576969 ↗
5. Infection of orthopedic implants with emphasis on bacterial adhesion process and techniques used in studying bacterial-material interactions10.4161/biom.22905 ↗
6. A mechanistic study of the antibacterial effect of silver ions on Escherichia coli and Staphylococcus aureus10.1002/1097-4636(20001215)52:4<662::AID-JBM10>3.0.CO;2-3 ↗
7. Silver nanoparticles incorporated polyaniline on TiO2 nanotube arrays: A nanocomposite platform to enhance the biocompatibility and antibiofilm10.1016/j.surfin.2020.100892 ↗
8. Silver nanoparticles as a new generation of antimicrobials10.1016/j.biotechadv.2008.09.002 ↗
9. Long-lasting in vivo and in vitro antibacterial ability of nanostructured titania coating incorporated with silver nanoparticles10.1002/jbm.a.35019 ↗
10. Antibacterial effects and biocompatibility of titanium surfaces with graded silver incorporation in titania nanotubes10.1016/j.biomaterials.2014.02.005 ↗
11. Mechanically stable antimicrobial chitosan-PVA-silver nanocomposite coatings deposited on titanium implants10.1016/j.carbpol.2014.12.027 ↗
12. Antibacterial coatings on titanium implants10.1002/jbm.b.31463 ↗
13. Surface modifications and cell-materials interactions with anodized Ti10.1016/j.actbio.2006.12.003 ↗
14. Anodization of titanium alloys for orthopedic applications10.1007/s11705-018-1759-y ↗
15. Surface characterization, shear strength, and bioactivity of anodized titanium prepared in mixed-acid electrolytes10.1016/j.surfcoat.2017.07.010 ↗
16. Crystallization in anodic oxide Films10.1016/0010-938X(88)90005-4 ↗
17. The electrochemical oxide growth behaviour on titanium in acid and alkaline electrolytes10.1016/S1350-4533(01)00050-9 ↗
18. Photocatalytic antibacterial effect of TiO2 film formed on Ti and TiAg exposed to Lactobacillus acidophilus10.1002/jbm.b.30604 ↗
19. A comparative study on the photocatalytic activities of microporous and nanoporous TiO2 layers prepared by electrochemical anodization10.1016/j.surfcoat.2014.12.076 ↗
20. Photocatalytic inhibition of microbial adhesion by anodized titanium10.1080/08927010400008563 ↗
21. Multifunctional nature of UV-irradiated nanocrystalline anatase thin films for biomedical applications10.1016/j.actbio.2010.06.021 ↗
22. Photocatalytic activity of reactively sputtered and directly sputtered titania coatings10.1016/j.tsf.2011.09.059 ↗
23. Photocatalytic degradation of methylene blue and inactivation of pathogenic bacteria using silver nanoparticles modified titanium dioxide thin films10.1007/s11274-015-1855-9 ↗
24. Enhancement of photocatalytic activity of titanium dioxide using non-metal doping methods under visible light: A review10.1007/s13762-017-1618-2 ↗
25. Visible-light photocatalysis in nitrogen-doped titanium oxides10.1126/science.1061051 ↗
26. Photocatalytic activity and antibacterial efficacy of UVA-treated titanium oxides10.1177/0885328220942669 ↗
27. Excellent photocatalytic performance of cobalt-doped titanium dioxide nanotubes under ultraviolet light10.1177/1847980416680808 ↗
28. Non-uniform distribution of dopant iron ions in TiO2 nanocrystals probed by X-ray diffraction, Raman scattering, photoluminescence and photocatalysis10.1039/C4TC02362E ↗
29. Fabrication of Gold-Doped Titanium Dioxide (TiO2:Au) Nanofibers Photocatalyst by Vacuum Ion Sputter Coating. Journal of macromolecular science
30. Preparation of Ag-Modified (B,P)-Codoped TiO2 Hollow Spheres with Enhanced Photocatalytic Activity10.1002/ejic.201301388 ↗
31. Visible Light Active Phosphorus-Doped TiO2 Nanoparticles: An EPR Evidence for the Enhanced Charge Separation10.1021/jp212346f ↗
32. Visible-light photocatalysis with phosphorus-doped titanium(IV) oxide particles prepared using a phosphide compound10.1016/j.apcatb.2012.11.014 ↗
33. Silver deposition on titanium surface by electrochemical anodizing process reduces bacterial adhesion of Streptococcus sanguinis and Lactobacillus salivarius10.1111/clr.12422 ↗
34. Influence of the Electrochemical Anodizing Parameters on the Microstructure, Microroughness and Microhardness of Anodized Ti-6Al-7Nb
35. Mori, Y., Fujimori, S., Kurishima, H., Inoue, H., Ishii, K., Kubota, M., Kawakami, K., Mori, N., Aizawa, T., and Masahashi, N. (2023). Antimicrobial Properties of TiNbSn Alloys Anodized in a Sulfuric Acid Electrolyte. Materials, 16.10.3390/ma16041487 ↗
36. Vera, M.L., Colaccio, Á., Rosenberger, M.R., Schvezov, C.E., and Ares, A.E. (2017). Influence of the Electrolyte Concentration on the Smooth TiO2 Anodic Coatings on Ti-6Al-4V. Coatings, 7.10.20944/preprints201703.0019.v1 ↗
37. Antibacterial and biocompatible polyaniline-doped titanium oxide layers10.1002/jbm.b.35217 ↗
38. Ali, A., Chowdhury, S., Janorkar, A.V., Marquart, M., Griggs, J.A., Bumgardner, J.D., and Roach, M.D. (2022). A Novel Single-Step Anodization Approach for PANI-doping Oxide Surfaces to Improve the Photocatalytic Activity of Titanium Implants. Biomed. Mater., 18.10.1088/1748-605X/aca37d ↗
39. Characterization of anodic spark-converted titanium surfaces for biomedical applications10.1023/A:1008988706980 ↗
40. The effects of titania nanotubes with embedded silver oxide nanoparticles on bacteria and osteoblasts10.1016/j.biomaterials.2014.01.058 ↗
41. Synthesis of silver-titanium dioxide nanocomposites for antimicrobial applications
42. Differential response of Staphylococci and osteoblasts to varying titanium surface roughness10.1016/j.biomaterials.2010.10.001 ↗
43. Drastic Enhancement of TiO2-Photocatalyzed Reduction of Nitrobenzene by Loading Ag Clusters10.1021/la049167m ↗
44. Lan, M.Y., Liu, C.P., Huang, H.H., and Lee, S.W. (2013). Both enhanced biocompatibility and antibacterial activity in Ag-decorated TiO2 nanotubes. PLoS ONE, 8.10.1371/journal.pone.0075364 ↗
45. Ag Nanoparticles Connected to the Surface of TiO2 Electrostatically for Antibacterial Photoinactivation Studies10.1111/php.12983 ↗
46. Akhter, P., Akhter, P., Arshad, A., Saleem, A., and Hussain, M. (2022). Recent Development in Non-Metal-Doped Titanium Dioxide Photocatalysts for Different Dyes Degradation and the Study of Their Strategic Factors: A Review. Catalysts, 12.10.3390/catal12111331 ↗
47. Tuning anatase and rutile phase ratios and nanoscale surface features by anodization processing onto titanium substrate surfaces10.1016/j.msec.2015.08.028 ↗
48. Surface modification of TiO2 by phosphate: Effect on photocatalytic activity and mechanism implication10.1021/jp712049c ↗
49. Photocatalytic activity of rutile-anatase coupled TiO2 particles prepared by a dissolution-reprecipitation method10.1016/S0021-9797(03)00755-0 ↗
50. Why is anatase a better photocatalyst than rutile?—Model studies on epitaxial TiO2 films10.1038/srep04043 ↗
51. Moma, J., and Baloyi, J. (2019). Modified Titanium Dioxide for Photocatalytic Applications. Photocatalysts—Applications and Attributes, IntechOpen.10.5772/intechopen.79374 ↗
52. Silver-decorated titanium dioxide nanotube arrays with improved photocatalytic activity for visible light irradiation10.1557/jmr.2014.116 ↗
53. Anodic Titanium Oxide Layers Modified with Gold, Silver, and Copper Nanoparticles10.1155/2019/9208734 ↗
54. Antibacterial effects of titanium embedded with silver nanoparticles based on electron-transfer-induced reactive oxygen species10.1016/j.biomaterials.2017.01.028 ↗
55. Biofilms as complex differentiated communities10.1146/annurev.micro.56.012302.160705 ↗
56. Coman, A.N., Mare, A., Tanase, C., Bud, E., and Rusu, A. (2021). Silver-Deposited Nanoparticles on the Titanium Nanotubes Surface as a Promising Antibacterial Material into Implants. Metals, 11.10.3390/met11010092 ↗
57. Potential antibacterial mechanism of silver nanoparticles and the optimization of orthopedic implants by advanced modification technologies10.2147/IJN.S165125 ↗
58. The significance of the surface properties of oxidized titanium to the bone response: Special emphasis on potential biochemical bonding of oxidized titanium implant10.1016/S0142-9612(03)00261-8 ↗