journal article·2024-02-26Open access

Characterization and In Vitro Evaluation of Porous Polymer-Blended Scaffolds Functionalized with Tricalcium Phosphate

Iwona Pudełko-Prażuch, Mareeswari Balasubramanian, Sundara Moorthi Ganesan, Stanisław Marecik, Kamila Walczak, Kinga Pielichowska, Suvro Chatterjee, Ravichandran Kandaswamy, Elżbieta Pamuła

Abstract

Bone tissue is one of the most transplanted tissues. The ageing population and bone diseases are the main causes of the growing need for novel treatments offered by bone tissue engineering. Three-dimensional (3D) scaffolds, as artificial structures that fulfil certain characteristics, can be used as a temporary matrix for bone regeneration. In this study, we aimed to fabricate 3D porous polymer scaffolds functionalized with tricalcium phosphate (TCP) particles for applications in bone tissue regeneration. Different combinations of poly(lactic acid) (PLA), poly(ethylene glycol) (PEG with molecular weight of 600 or 2000 Da) and poly(ε-caprolactone) (PCL) with TCP were blended by a gel-casting method combined with rapid heating. Porous composite scaffolds with pore sizes from 100 to 1500 µm were obtained. ATR-FTIR, DSC, and wettability tests were performed to study scaffold composition, thermal properties, and hydrophilicity, respectively. The samples were observed with the use of optical and scanning electron microscopes. The addition of PCL to PLA increased the hydrophobicity of the composite scaffolds and reduced their susceptibility to degradation, whereas the addition of PEG increased the hydrophilicity and degradation rates but concomitantly resulted in enhanced creation of rounded mineral deposits. The scaffolds were not cytotoxic according to an indirect test in L929 fibroblasts, and they supported adhesion and growth of MG-63 cells when cultured in direct contact.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Bone Tissue Engineering Materials · biodegradable polymer synthesis and properties · Graphene and Nanomaterials Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Biomaterials and Composites, Faculty of Materials Science and Ceramics, AGH University of Krakow, Al. Mickiewicza 30, 30-059 Krakow, Poland

Department of Rubber and Plastics Technology, Madras Institute of Technology Campus, Anna University, Chromepet, Chennai 600 044, Tamil Nadu, India

Department of Biotechnology, Golapbag Campus, University of Burdwan, Burdwan 713 104, West Bengal, India

Funding

Polish National Agency for Academic Exchange · Department of Science and Technology · AGH University of Krakow

References (76)

Show source-provided references
1. Scaffold Fabrication Technologies and Structure/Function Properties in Bone Tissue Engineering10.1002/adfm.202010609 ↗
2. Scaffolds for Bone Tissue Engineering: State of the Art and New Perspectives10.1016/j.msec.2017.05.017 ↗
3. Biomimetic Porous Scaffolds for Bone Tissue Engineering10.1016/j.mser.2014.04.001 ↗
4. Biomaterials for Bone Tissue Engineering Scaffolds: A Review10.1039/C9RA05214C ↗
5. Current Concepts in Scaffolding for Bone Tissue Engineering
6. Abdelaziz, A.G., Nageh, H., Abdo, S.M., Abdalla, M.S., Amer, A.A., Abdal-hay, A., and Barhoum, A. (2023). A Review of 3D Polymeric Scaffolds for Bone Tissue Engineering: Principles, Fabrication Techniques, Immunomodulatory Roles, and Challenges. Bioengineering, 10.10.3390/bioengineering10020204 ↗
7. Scaffolds for Bone-Tissue Engineering10.1016/j.matt.2022.06.003 ↗
8. Porous Scaffolds for Bone Regeneration10.1016/j.jsamd.2020.01.007 ↗
9. The Effect of Pore Size on the Mechanical Properties, Biodegradation and Osteogenic Effects of Additively Manufactured Magnesium Scaffolds after High Temperature Oxidation: An in Vitro and in Vivo Study
10. Applications of PLA in Modern Medicine
11. Ranakoti, L., Gangil, B., Bhandari, P., Singh, T., Sharma, S., Singh, J., and Singh, S. (2023). Promising Role of Polylactic Acid as an Ingenious Biomaterial in Scaffolds, Drug Delivery, Tissue Engineering, and Medical Implants: Research Developments, and Prospective Applications. Molecules, 28.10.3390/molecules28020485 ↗
12. Melt Electrowriting of PLA, PCL, and Composite PLA/PCL Scaffolds for Tissue Engineering Application10.1038/s41598-022-24275-6 ↗
13. PLA/Hydroxyapatite Scaffolds Exhibit in Vitro Immunological Inertness and Promote Robust Osteogenic Differentiation of Human Mesenchymal Stem Cells without Osteogenic Stimuli10.1038/s41598-022-05207-w ↗
14. Characterisation of PCL and PCL/PLA Scaffolds for Tissue Engineering10.1016/j.procir.2013.01.022 ↗
15. The Novel Approach to Physico-Chemical Modification and Cytocompatibility Enhancement of Fibrous Polycaprolactone (PCL) Scaffolds Using Soft X-Ray/Extreme Ultraviolet (SXR/EUV) Radiation and Low-Temperature, SXR/EUV Induced, Nitrogen and Oxygen Plasmas10.1016/j.apsusc.2022.154779 ↗
16. The Effect of Polyethylene Glycol on Printability, Physical and Mechanical Properties and Osteogenic Potential of 3D-Printed Poly (l-Lactic Acid)/Polyethylene Glycol Scaffold for Bone Tissue Engineering10.1016/j.ijbiomac.2022.09.027 ↗
17. Optimized Polylactic Acid/Polyethylene Glycol (PLA/PEG) Electrospun Fibrous Scaffold for Drug Delivery: Effect of Graphene Oxide on the Cefixime Release Mechanism10.1088/2053-1591/ab508d ↗
18. A Review of Fabrication Polymer Scaffolds for Biomedical Applications Using Additive Manufacturing Techniques10.1016/j.bbe.2020.01.015 ↗
19. Fabrication of Biomedical Scaffolds Using Biodegradable Polymers10.1021/acs.chemrev.0c01200 ↗
20. Scaffold Techniques and Designs in Tissue Engineering Functions and Purposes: A Review10.1155/2019/3429527 ↗
21. Polymer Blends and Polymer Composites for Cardiovascular Implants10.1016/j.eurpolymj.2020.110249 ↗
22. 3D Printing of Ceramic-Based Scaffolds for Bone Tissue Engineering: An Overview10.1039/C8TB00677F ↗
23. Aydogdu, M.O., Oner, E.T., Ekren, N., Erdemir, G., Kuruca, S.E., Yuca, E., Bostan, M.S., Eroglu, M.S., Ikram, F., and Uzun, M. (2019). Comparative Characterization of the Hydrogel Added PLA/β-TCP Scaffolds Produced by 3D Bioprinting. Bioprinting, 13.10.1016/j.bprint.2019.e00046 ↗
24. Fused Deposition Modeling Printed PLA/Nano β-TCP Composite Bone Tissue Engineering Scaffolds for Promoting Osteogenic Induction Function10.2147/IJN.S416098 ↗
25. Biodegradable Materials for Bone Defect Repair
26. Ruiz-Aguilar, C. (2023). Porous Phosphate-Based Bioactive Glass/β-TCP Scaffold for Tooth Remineralization. PLoS ONE, 18.10.1371/journal.pone.0284885 ↗
27. Elhattab, K., Bhaduri, S.B., and Sikder, P. (2022). Influence of Fused Deposition Modelling Nozzle Temperature on the Rheology and Mechanical Properties of 3D Printed β-Tricalcium Phosphate (TCP)/Polylactic Acid (PLA) Composite. Polymers, 14.10.3390/polym14061222 ↗
28. Enhanced osteogenic differentiation of human mesenchymal stem cells BY flexible β-TCP/PLA bone grafts with silicate additive
29. Enzymatic Degradation Study of PLA-Based Composite Scaffolds10.1515/rams-2020-0005 ↗
30. 3D Printed PCL/β-TCP Cross-Scale Scaffold with High-Precision Fiber for Providing Cell Growth and Forming Bones in the Pores10.1016/j.msec.2021.112197 ↗
31. Helaehil, J.V., Lourenço, C.B., Huang, B., Helaehil, L.V., De Camargo, I.X., Chiarotto, G.B., Santamaria-Jr, M., Bártolo, P., and Caetano, G.F. (2021). In Vivo Investigation of Polymer-Ceramic PCL/HA and PCL/β-TCP 3D Composite Scaffolds and Electrical Stimulation for Bone Regeneration. Polymers, 14.10.3390/polym14010065 ↗
32. Tabatabaei, F., Gelin, A., Rasoulianboroujeni, M., and Tayebi, L. (2022). Coating of 3D Printed PCL/TCP Scaffolds Using Homogenized-Fibrillated Collagen. Colloids Surf. B Biointerfaces, 217.10.1016/j.colsurfb.2022.112670 ↗
33. Morphological, Thermal and Bioactivity Evaluation of Electrospun PCL/β-TCP Fibers for Tissue Regeneration10.1590/0104-1428.02118 ↗
34. 3D-printed Polycaprolactone Scaffold Mixed with Β-tricalcium Phosphate as a Bone Regenerative Material in Rabbit Calvarial Defects10.1002/jbm.b.34218 ↗
35. Senatov, F., Zimina, A., Chubrik, A., Kolesnikov, E., Permyakova, E., Voronin, A., Poponova, M., Orlova, P., Grunina, T., and Nikitin, K. (2022). Effect of Recombinant BMP-2 and Erythropoietin on Osteogenic Properties of Biomimetic PLA/PCL/HA and PHB/HA Scaffolds in Critical-Size Cranial Defects Model. Biomater. Adv., 135.10.1016/j.msec.2022.112680 ↗
36. Microstructures and Properties of Polycaprolactone/Tricalcium Phosphate Scaffolds Containing Polyethylene Glycol Fabricated by 3D Printing10.1016/j.ceramint.2022.05.081 ↗
37. Haidar, Z.S. (2023). Biomedical Engineering, IntechOpen.
38. In Vitro Degradation of a 3D Porous Pennisetum Purpureum/PLA Biocomposite Scaffold10.1016/j.jmbbm.2017.06.035 ↗
39. Biocompatible PLA/PCL Blends Nanocomposites Doped with Nanographite: Physico-Chemical, and Thermal Behaviour10.1007/s10965-022-03117-z ↗
40. High-Impact PLA in Compatibilized PLA/PCL Blends: Optimization of Blend Composition and Type and Content of Compatibilizer10.1002/mame.202300213 ↗
41. Preparation and Characterization of Polyvinyl Alcohol/Chitosan Blends Plasticized and Compatibilized by Glycerol/Polyethylene Glycol10.1016/j.carbpol.2019.115784 ↗
42. Poly(Lactic Acid)/Polycaprolactone Blends Compatibilized with Block Copolymer10.1016/j.egypro.2013.06.783 ↗
43. Knap, K., Reczyńska-Kolman, K., Kwiecień, K., Niewolik, D., Płonka, J., Ochońska, D., Jeleń, P., Mielczarek, P., Kazek-Kęsik, A., and Jaszcz, K. (2023). Poly(Sebacic Acid) Microparticles Loaded with Azithromycin as Potential Pulmonary Drug Delivery System: Physicochemical Properties, Antibacterial Behavior, and Cytocompatibility Studies. Biomater. Adv., 153.10.1016/j.bioadv.2023.213540 ↗
44. Surface Multifunctionalization of Inert Ceramic Implants by Calcium Phosphate Biomimetic Coating Doped with Nanoparticles Encapsulating Antibiotics10.1021/acsami.3c03884 ↗
45. Biocompatibility Assessment of Poly(Lactic Acid) Films after Sterilization with Ethylene Oxide in Histological Study In Vivo with Wistar Rats and Cellular Adhesion of Fibroblasts In Vitro10.1155/2017/7158650 ↗
46. Poly(Lactic Acid)/Poly(Ethylene Glycol) Polymer Nanocomposites: Effects of Graphene Nanoplatelets10.3390/polym6010093 ↗
47. Fabrication and Characterization of Customized Tubular Scaffolds for Tracheal Tissue Engineering by Using Solvent Based 3D Printing on Predefined Template10.1108/RPJ-08-2020-0186 ↗
48. Alginate affecting the characteristics of porous β-TCP/alginate composite scaffolds
49. Vibrational Properties of Calcium Phosphate Compounds. 2. Comparison between Hydroxyapatite and β-Tricalcium Phosphate10.1021/cm9604266 ↗
50. Investigation of the Structure of Solution Grown Crystals of Lactide Copolymers by Means of Chemical Reactions10.1007/BF01498927 ↗
51. Al-Azzam, N., and Alazzam, A. (2022). Micropatterning of Cells via Adjusting Surface Wettability Using Plasma Treatment and Graphene Oxide Deposition. PLoS ONE, 17.10.1371/journal.pone.0269914 ↗
52. Recent Advance in Surface Modification for Regulating Cell Adhesion and Behaviors10.1515/ntrev-2020-0076 ↗
53. (2009). Biological Evaluation of Medical Devices—Part 5: Tests for In Vitro Cytotoxicity (Standard No. ISO 10993-5:2009).
54. 3D Bioprinted Poly(Lactic Acid)/Mesoporous Bioactive Glass Based Biomimetic Scaffold with Rapid Apatite Crystallization and in-Vitro Cytocompatability for Bone Tissue Engineering10.1016/j.ijbiomac.2022.07.202 ↗
55. Antimicrobial Activity Evaluation for Gentamicin Loaded PLA Microspheres10.1016/j.matpr.2019.06.092 ↗
56. Wang, K., Wang, R., Hu, K., Ma, Z., Zhang, C., and Sun, X. (2024). Crystallization-Driven Formation Poly (l-Lactic Acid)/Poly (d-Lactic Acid)-Polyethylene Glycol-Poly (l-Lactic Acid) Small-Sized Microsphere Structures by Solvent-Induced Self-Assembly. Int. J. Biol. Macromol., 254.10.1016/j.ijbiomac.2023.127924 ↗
57. Gefitinib Conjugated PEG Passivated Graphene Quantum Dots Incorporated PLA Microspheres for Targeted Anticancer Drug Delivery10.1016/j.heliyon.2022.e12512 ↗
58. Kaniuk, E., Lechowska-Liszka, A., Gajek, M., Nikodem, A., Ścisłowska-Czarnecka, A., Rapacz-Kmita, A., and Stodolak-Zych, E. (2023). Correlation between Porosity and Physicochemical and Biological Properties of Electrospinning PLA/PVA Membranes for Skin Regeneration. Biomater. Adv., 152.10.1016/j.bioadv.2023.213506 ↗
59. One-Step Fabrication of Polylactic Acid (PLA) Nanofibrous Membranes with Spider-Web-like Structure for High-Efficiency PM0.3 Capture10.1016/j.jhazmat.2023.133232 ↗
60. PLA-PEG-Cholesterol Biomimetic Membrane for Electrochemical Sensing of Antioxidants10.1016/j.electacta.2023.143716 ↗
61. Electrospun Microstructured PLA-Based Scaffolds Featuring Relevant Anisotropic, Mechanical and Degradation Characteristics for Soft Tissue Engineering10.1016/j.msec.2021.112339 ↗
62. Fabrication of Super-Hydrophilic and Highly Open-Porous Poly (Lactic Acid) Scaffolds Using Supercritical Carbon Dioxide Foaming10.1016/j.ijbiomac.2022.03.107 ↗
63. Molina, M.I.E., and Komvopoulos, K. (2023). In Vitro Degradation of Fibrous Bilayer Poly-L-Lactic Acid Scaffolds. J. Biomech., 161.10.1016/j.jbiomech.2023.111823 ↗
64. Fabrication of Cancellous-Bone-Mimicking β-Tricalcium Phosphate Bioceramic Scaffolds with Tunable Architecture and Mechanical Strength by Stereolithography 3D Printing10.1016/j.jeurceramsoc.2022.07.033 ↗
65. Fabrication of Functional and Nano-Biocomposite Scaffolds Using Strontium-Doped Bredigite Nanoparticles/Polycaprolactone/Poly Lactic Acid via 3D Printing for Bone Regeneration10.1016/j.ijbiomac.2022.08.136 ↗
66. Selective Dispersion of Carbon Nanotubes and Nanoclay in Biodegradable Poly(ε-Caprolactone)/Poly(Lactic Acid) Blends with Improved Toughness, Strength and Thermal Stability10.1016/j.ijbiomac.2019.10.262 ↗
67. Dodda, J.M., Azar, M.G., Bělský, P., Šlouf, M., Gajdošová, V., Kasi, P.B., Anerillas, L.O., and Kovářík, T. (2023). Bioresorbable Films of Polycaprolactone Blended with Poly(Lactic Acid) or Poly(Lactic-Co-Glycolic Acid). Int. J. Biol. Macromol., 248.10.1016/j.ijbiomac.2023.126654 ↗
68. Supercritical Processing of PCL and PCL-PEG Blends to Produce Improved PCL-Based Porous Scaffolds10.1016/j.supflu.2022.105611 ↗
69. Growth and Osteogenic Differentiation of Adipose Stem Cells on PLA/Bioactive Glass and PLA/β-TCP Scaffolds10.1089/ten.tea.2008.0241 ↗
70. Thermal Expansivity and Degradation Properties of PLA/HA and PLA/βTCP in Vitro Conditioned Composites10.1007/s10973-019-08799-0 ↗
71. Influence of Blending and Blend Morphology on the Thermal Properties and Crystallization Behaviour of PLA and PCL in PLA/PCL Blends10.1007/s10853-016-9784-z ↗
72. Morphologies, Crystallization, and Mechanical Properties of PLA-based Nanocomposites: Synergistic Effects of PEG/HNTs10.1002/app.47385 ↗
73. Poly(Lactic Acid)/Poly(Ethylene Glycol) Blends: Mechanical, Thermal and Morphological Properties10.1063/1.4945957 ↗
74. Composite Fibrous Membrane Comprising PLA and PCL Fibers for Biomedical Application10.1016/j.coco.2022.101268 ↗
75. In Vitro Bioactivity and Biocompatibility Assessment of PCL/PLA–Scaffolded Mesoporous Silicate Bioactive Glass: Role of Boron Activation10.1016/j.jnoncrysol.2023.122763 ↗
76. Foamed High Porosity Alumina for Use as a Bone Tissue Scaffold10.1016/j.ceramint.2014.09.026 ↗