journal article·2023-05-26Open access

Influence of Dental Titanium Implants with Different Surface Treatments Using Femtosecond and Nanosecond Lasers on Biofilm Formation

Bo Yun Seo, KeunBaDa Son, Young-Tak Son, Ram Hari Dahal, Shukho Kim, Jungmin Kim, JunHo Hwang, Sung-Min Kwon, Jae-Mok Lee, Kyu-Bok Lee, Jin-Wook Kim

Abstract

This study aimed to evaluate the impact of different surface treatments (machined; sandblasted, large grit, and acid-etched (SLA); hydrophilic; and hydrophobic) on dental titanium (Ti) implant surface morphology, roughness, and biofilm formation. Four groups of Ti disks were prepared using distinct surface treatments, including femtosecond and nanosecond lasers for hydrophilic and hydrophobic treatments. Surface morphology, wettability, and roughness were assessed. Biofilm formation was evaluated by counting the colonies of Aggregatibacter actinomycetemcomitans (Aa), Porphyromonas gingivalis (Pg), and Prevotella intermedia (Pi) at 48 and 72 h. Statistical analysis was conducted to compare the groups using the Kruskal–Wallis H test and the Wilcoxon signed-rank test (α = 0.05). The analysis revealed that the hydrophobic group had the highest surface contact angle and roughness (p < 0.05), whereas the machined group had significantly higher bacterial counts across all biofilms (p < 0.05). At 48 h, the lowest bacterial counts were observed in the SLA group for Aa and the SLA and hydrophobic groups for Pg and Pi. At 72 h, low bacterial counts were observed in the SLA, hydrophilic, and hydrophobic groups. The results indicate that various surface treatments affect implant surface properties, with the hydrophobic surface using femtosecond laser treatment exerting a particularly inhibitory effect on initial biofilm growth (Pg and Pi).
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Dental materials and restorations · Dental Implant Techniques and Outcomes · Laser Applications in Dentistry and Medicine

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Oral & Maxillofacial Surgery, School of Dentistry, Kyungpook National University, Daegu 41940, Republic of Korea

Advanced Dental Device Development Institute (A3DI), Kyungpook National University, Daegu 41940, Republic of Korea

Department of Dental Science, Graduate School, Kyungpook National University, Daegu 41940, Republic of Korea

Department of Microbiology, School of Medicine, Kyungpook National University, Daegu 41944, Republic of Korea

Institute of Advanced Convergence Technology, Kyungpook National University, Daegu 41061, Republic of Korea

Department of Periodontology, School of Dentistry, Kyungpook National University, Daegu 41940, Republic of Korea

Department of Prosthodontics, School of Dentistry, Kyungpook National University, Daegu 41940, Republic of Korea

Funding

National Research Foundation of Korea (NRF) · Bio Industry Technology Development Program of the Korea Evaluation Institute of Industrial Technology (KEIT)

References (34)

Show source-provided references
1. Prosthetic failures in dental implant therapy10.1111/prd.12416 ↗
2. Survival of dental implants at sites after implant failure: A systematic review10.1016/j.prosdent.2018.11.007 ↗
3. Innovative surfaces and alloys for dental implants: What about biointerface-safety concerns?10.1016/j.dental.2021.08.008 ↗
4. Blank, E., Grischke, J., Winkel, A., Eberhard, J., Kommerein, N., Doll, K., and Stiesch, M. (2021). Evaluation of biofilm colonization on multi-part dental implants in a rat model. BMC Oral Health, 21.10.1186/s12903-021-01665-2 ↗
5. Peri-implantitis is not periodontitis: Scientific discoveries shed light on microbiome-biomaterial interactions that may determine disease phenotype10.1111/prd.12372 ↗
6. Topographic characterization of multispecies biofilms growing on dental implant surfaces: An in vitro model10.1111/clr.13409 ↗
7. Biofilm formation on metal alloys, zirconia and polyetherketoneketone as implant materials in vivo10.1111/clr.13654 ↗
8. Race to invade: Understanding soft tissue integration at the transmucosal region of titanium dental implants10.1016/j.dental.2021.02.005 ↗
9. Comparison of In Vitro Biofilm Formation on Titanium and Zirconia Implants10.1155/2023/8728499 ↗
10. Surface engineering for dental implantology: Favoring tissue responses along the implant10.1089/ten.tea.2021.0230 ↗
11. Effect of biofilm formation on implant abutments with an anti-bacterial coating: A pre-clinical in vivo study10.1111/clr.13745 ↗
12. Advanced surface engineering of titanium materials for biomedical applications: From static modification to dynamic responsive regulation10.1016/j.bioactmat.2023.03.006 ↗
13. Comparative analysis of biofilm formation on materials used for the fabrication of implant-supported prostheses10.1590/0103-6440202003385 ↗
14. Succession of oral bacterial colonizers on dental implant materials: An in vitro biofilm model10.1016/j.dental.2021.12.021 ↗
15. From femtosecond to nanosecond laser microstructuring of conical aluminum surfaces by reactive gas assisted laser ablation10.1002/cphc.202000418 ↗
16. Fabrication of hierarchical structures on titanium alloy surfaces by nanosecond laser for wettability modification10.1016/j.optlastec.2021.107728 ↗
17. Fabrication of micropores on titanium implants using femtosecond laser technology: Perpendicular attachment of connective tissues as a pilot study10.1016/j.optlastec.2021.107624 ↗
18. Metal surface wettability modification by nanosecond laser surface texturing: A review10.1049/bsb2.12039 ↗
19. A novel method to fabricate micro-nano hierarchical topographies on zirconia dental implant using femtosecond laser10.1016/j.matlet.2023.134454 ↗
20. Wu, X., Ao, H., He, Z., Wang, Q., and Peng, Z. (2022). Surface Modification of Titanium by Femtosecond Laser in Reducing Bacterial Colonization. Coatings, 12.10.3390/coatings12030414 ↗
21. Han, W., Fang, S., Zhong, Q., and Qi, S. (2022). Influence of Dental Implant Surface Modifications on Osseointegration and Biofilm Attachment. Coatings, 12.10.3390/coatings12111654 ↗
22. Design of Biocompatible and Self-antibacterial Titanium Surfaces for Biomedical Applications10.1016/j.cobme.2022.100423 ↗
23. Laser nano surface texturing for enhancing of physical and chemical properties of dental implants
24. Comparison of the Stability of Sandblasted, Large-Grit, and Acid-Etched Treated Mini-Screws with Two Different Surface Roughness Values: A Histomorphometric Study10.1097/SCS.0000000000007837 ↗
25. The effect of different surface topographies of titanium implants on bacterial biofilm: A systematic review10.1007/s42452-019-0638-6 ↗
26. Femtosecond Laser-Texturing the Surface of Ti-Based Implants to Improve Their Osseointegration Capacity10.1002/admi.202201164 ↗
27. Fast fabrication of superhydrophobic titanium alloy as antibacterial surface using nanosecond laser texturing10.1115/1.4038093 ↗
28. The biocompatibility of SLA-treated titanium implants10.1088/1748-6041/3/2/025011 ↗
29. Influence of different zirconia surface treatments on biofilm formation in vitro and in situ10.1111/clr.13902 ↗
30. Osteoblastic cell behaviour on different titanium implant surfaces10.1016/j.actbio.2007.12.002 ↗
31. Intranuclear cell uptake and toxicity of titanium dioxide and zirconia particles as well as bacterial adhesion on dental titanium-and zirconia-implants10.1016/j.dental.2021.12.142 ↗
32. Periodontal and peri-implant microbiota in patients with healthy and inflamed periodontal and peri-implant tissues10.1111/clr.12508 ↗
33. Preventing peri-implantitis: The quest for a next generation of titanium dental implants10.1021/acsbiomaterials.2c00540 ↗
34. Antibacterial properties of metal and metalloid ions in chronic periodontitis and peri-implantitis therapy10.1016/j.actbio.2014.03.028 ↗