journal article·2023-02-22Open access

Conditional Mitigation of Dental-Composite Material-Induced Cytotoxicity by Increasing the Cure Time

Takanori Matsuura, Keiji Komatsu, Kimberly Choi, Toshikatsu Suzumura, James Cheng, Ting-Ling Chang, Denny Chao, Takahiro Ogawa

Abstract

Light-cured composite resins are widely used in dental restorations to fill cavities and fabricate temporary crowns. After curing, the residual monomer is a known to be cytotoxic, but increasing the curing time should improve biocompatibility. However, a biologically optimized cure time has not been determined through systematic experimentation. The objective of this study was to examine the behavior and function of human gingival fibroblasts cultured with flowable and bulk-fill composites cured for different periods of time, while considering the physical location of the cells with regard to the materials. Biological effects were separately evaluated for cells in direct contact with, and in close proximity to, the two composite materials. Curing time varied from the recommended 20 s to 40, 60, and 80 s. Pre-cured, milled-acrylic resin was used as a control. No cell survived and attached to or around the flowable composite, regardless of curing time. Some cells survived and attached close to (but not on) the bulk-fill composite, with survival increasing with a longer curing time, albeit to <20% of the numbers growing on milled acrylic even after 80 s of curing. A few cells (<5% of milled acrylic) survived and attached around the flowable composite after removal of the surface layer, but attachment was not cure-time dependent. Removing the surface layer increased cell survival and attachment around the bulk-fill composite after a 20-s cure, but survival was reduced after an 80-s cure. Dental-composite materials are lethal to contacting fibroblasts, regardless of curing time. However, longer curing times mitigated material cytotoxicity exclusively for bulk-fill composites when the cells were not in direct contact. Removing the surface layer slightly improved biocompatibility for cells in proximity to the materials, but not in proportion to cure time. In conclusion, mitigating the cytotoxicity of composite materials by increasing cure time is conditional on the physical location of cells, the type of material, and the finish of the surface layer. This study provides valuable information for clinical decision making and novel insights into the polymerization behavior of composite materials.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Dental materials and restorations · Dental Implant Techniques and Outcomes · Dental Trauma and Treatments

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Division of Regenerative and Reconstructive Sciences and Weintraub Center for Reconstructive Biotechnology, UCLA School of Dentistry, Los Angeles, CA 90095, USA

Department of Periodontology, Graduate School of Medical and Dental Sciences, Tokyo Medical and Dental University, Tokyo 113-8510, Japan

References (78)

Show source-provided references
1. Resin composite—State of the art10.1016/j.dental.2010.10.020 ↗
2. Fabrication and Use of a Customized Provisional Composite Abutment in Dental Practice10.1155/2021/9929803 ↗
3. Resin based restorative dental materials: Characteristics and future perspectives10.1016/j.jdsr.2019.09.004 ↗
4. Resin composites in dentistry: The monomer systems10.1111/j.1600-0722.1997.tb00188.x ↗
5. Nicolae, L.C., Shelton, R.M., Cooper, P.R., Martin, R.A., and Palin, W.M. (2014). Hindawi Publishing Corporation Conference Papers in Science, Hindawi.
6. Evaluation of the efficacy of flowable composite as lining material on microleakage of composite resin restorations: A systematic review and meta-analysis
7. Bulk-Fill Composites: A Review of the Current Literature
8. Curing dental resins and composites by photopolymerization10.1111/j.1708-8240.2000.tb00239.x ↗
9. N-acetyl cysteine prevents polymethyl methacrylate bone cement extract-induced cell death and functional suppression of rat primary osteoblasts10.1002/jbm.a.32336 ↗
10. N-Acetyl cysteine prevents suppression of oral fibroblast function on poly(methylmethacrylate) resin10.1016/j.actbio.2008.07.021 ↗
11. Hamajima, K., Ozawa, R., Saruta, J., Saita, M., Kitajima, H., Taleghani, S.R., Usami, D., Goharian, D., Uno, M., and Miyazawa, K. (2020). The Effect of TBB, as an Initiator, on the Biological Compatibility of PMMA/MMA Bone Cement. Int. J. Mol. Sci., 21.10.3390/ijms21114016 ↗
12. Restored viability and function of dental pulp cells on poly-methylmethacrylate (PMMA)-based dental resin supplemented with N-acetyl cysteine (NAC)10.1016/j.dental.2008.04.008 ↗
13. Biocompatibility of 4-META/MMA-TBB resin used as a dental luting agent10.1016/j.prosdent.2014.10.016 ↗
14. Sugita, Y., Okubo, T., Saita, M., Ishijima, M., Torii, Y., Tanaka, M., Iwasaki, C., Sekiya, T., Tabuchi, M., and Mohammadzadeh Rezaei, N. (2020). Novel Osteogenic Behaviors around Hydrophilic and Radical-Free 4-META/MMA-TBB: Implications of an Osseointegrating Bone Cement. Int. J. Mol. Sci., 21.10.3390/ijms21072405 ↗
15. N-acetyl cysteine (NAC)-mediated detoxification and functionalization of poly(methyl methacrylate) bone cement10.1016/j.biomaterials.2009.02.043 ↗
16. N-Acetyl cysteine restores viability and function of rat odontoblast-like cells impaired by polymethylmethacrylate dental resin extract10.1179/135100009X392430 ↗
17. N-acetyl cysteine (NAC)-assisted detoxification of PMMA resin10.1177/154405910808700417 ↗
18. Komatsu, K., Hamajima, K., Ozawa, R., Kitajima, H., Matsuura, T., and Ogawa, T. (2022). Novel Tuning of PMMA Orthopedic Bone Cement Using TBB Initiator: Effect of Bone Cement Extracts on Bioactivity of Osteoblasts and Osteoclasts. Cells, 11.10.3390/cells11243999 ↗
19. Cytotoxic effects of acrylates and methacrylates: Relationships of monomer structures and cytotoxicity10.1002/(SICI)1097-4636(19971215)37:4<517::AID-JBM10>3.0.CO;2-5 ↗
20. Haugen, H.J., Marovic, D., Par, M., Thieu, M.K.L., Reseland, J.E., and Johnsen, G.F. (2020). Bulk Fill Composites Have Similar Performance to Conventional Dental Composites. Int. J. Mol. Sci., 21.10.3390/ijms21145136 ↗
21. Genetic and cellular toxicology of dental resin monomers10.1177/154405910608501001 ↗
22. In-vitro cytocompatibility of dental resin monomers on osteoblast-like cells10.1016/j.jdent.2017.07.008 ↗
23. Cytotoxicity of provisional crown and bridge restoration materials: An in vitro study10.2334/josnusd.43.123 ↗
24. Cytotoxicity of composite materials polymerized with LED curing units10.2341/07-16 ↗
25. Cytotoxicity Evaluation of Two Bis-Acryl Composite Resins Using Human Gingival Fibroblasts10.1590/0103-6440201600824 ↗
26. Cytotoxicity and inflammatory response of different types of provisional restorative materials10.1016/j.archoralbio.2019.104643 ↗
27. Effect of extraction media and storage time on the elution of monomers from four contemporary resin composite materials10.4103/0971-6580.128811 ↗
28. Amino acid derivative-mediated detoxification and functionalization of dual cure dental restorative material for dental pulp cell mineralization10.1016/j.biomaterials.2010.06.018 ↗
29. Chemodynamics underlying N-acetyl cysteine-mediated bone cement monomer detoxification10.1016/j.actbio.2009.04.027 ↗
30. Thermo-setting glass ionomer cements promote variable biological responses of human dental pulp stem cells10.1016/j.dental.2018.03.015 ↗
31. Lopez-Garcia, S., Pecci-Lloret, M.P., Pecci-Lloret, M.R., Onate-Sanchez, R.E., Garcia-Bernal, D., Castelo-Baz, P., Rodriguez-Lozano, F.J., and Guerrero-Girones, J. (2019). In Vitro Evaluation of the Biological Effects of ACTIVA Kids BioACTIVE Restorative, Ionolux, and Riva Light Cure on Human Dental Pulp Stem Cells. Materials, 12.10.3390/ma12223694 ↗
32. TEGDMA induces mitochondrial damage and oxidative stress in human gingival fibroblasts10.1016/j.biomaterials.2005.01.014 ↗
33. Biological and biochemical characterization of 4-META/MMA-TBB resin10.15226/jdodt.2015.00147 ↗
34. Elution of monomers from two conventional dental composite materials10.1016/j.dental.2006.12.011 ↗
35. Oxygen inhibition of autopolymerization of polymethylmethacrylate-glass fibre composite10.1023/A:1018578210453 ↗
36. Effect of the degree of conversion of resin-based composites on cytotoxicity, cell attachment, and gene expression10.1016/j.dental.2019.05.015 ↗
37. Matsuura, T., Komatsu, K., and Ogawa, T. (2022). N-Acetyl Cysteine-Mediated Improvements in Dental Restorative Material Biocompatibility. Int. J. Mol. Sci., 23.10.3390/ijms232415869 ↗
38. Matsuura, T., Komatsu, K., Chao, D., Lin, Y.C., Oberoi, N., McCulloch, K., Cheng, J., Orellana, D., and Ogawa, T. (2022). Cell Type-Specific Effects of Implant Provisional Restoration Materials on the Growth and Function of Human Fibroblasts and Osteoblasts. Biomimetics, 7.10.3390/biomimetics7040243 ↗
39. Nakhaei, K., Ishijima, M., Ikeda, T., Ghassemi, A., Saruta, J., and Ogawa, T. (2020). Ultraviolet Light Treatment of Titanium Enhances Attachment, Adhesion, and Retention of Human Oral Epithelial Cells via Decarbonization. Materials, 14.10.3390/ma14010151 ↗
40. Ultraviolet treatment restores bioactivity of titanium mesh plate degraded by contact with medical gloves10.2334/josnusd.17-0443 ↗
41. Effect of titanium surface characteristics on the behavior and function of oral fibroblasts
42. Osteoblasts generate harder, stiffer, and more delamination-resistant mineralized tissue on titanium than on polystyrene, associated with distinct tissue micro- and ultrastructure10.1359/JBMR.050703 ↗
43. Enhanced intrinsic biomechanical properties of osteoblastic mineralized tissue on roughened titanium surface10.1002/jbm.a.30227 ↗
44. Resin composite blocks via high-pressure high-temperature polymerization10.1016/j.dental.2011.12.003 ↗
45. Hada, T., Kanazawa, M., Iwaki, M., Katheng, A., and Minakuchi, S. (2021). Comparison of Mechanical Properties of PMMA Disks for Digitally Designed Dentures. Polymers, 13.10.3390/polym13111745 ↗
46. Monomer release from dental restorative materials containing dimethacrylate resin after bleaching10.1007/s00784-022-04446-5 ↗
47. Cell physiological effects of glass ionomer cements on fibroblast cells10.1016/j.tiv.2019.104627 ↗
48. Effect of water temperature on the fit of provisional crown margins during polymerization10.1016/S0022-3913(99)70006-5 ↗
49. Effect of curing environment on mechanical properties and polymerizing behaviour of methyl-methacrylate autopolymerizing resin10.1111/j.1365-2842.2004.01406.x ↗
50. Setting characteristics of five autopolymerizing resins measured by an oscillating rheometer10.1067/mpr.2001.113354 ↗
51. Elution study of unreacted Bis-GMA, TEGDMA, UDMA, and Bis-EMA from light-cured dental resins and resin composites using HPLC10.1002/jbm.b.30252 ↗
52. In vitro testing of the potential for orthopedic bone cements to cause apoptosis of osteoblast-like cells10.1016/S0142-9612(01)00149-1 ↗
53. De Angelis, F., Mandatori, D., Schiavone, V., Melito, F.P., Valentinuzzi, S., Vadini, M., Di Tomo, P., Vanini, L., Pelusi, L., and Pipino, C. (2021). Cytotoxic and Genotoxic Effects of Composite Resins on Cultured Human Gingival Fibroblasts. Materials, 14.10.3390/ma14185225 ↗
54. Effect of thickness on shrinkage stress and bottom-to-top hardness ratio of conventional and bulk-fill composites10.1111/eos.12825 ↗
55. Effect of air, dentin and resin-based composite thickness on light intensity reduction
56. Clinical performance and chemical-physical properties of bulk fill composites resin -a systematic review and meta-analysis10.1016/j.dental.2019.07.007 ↗
57. Influence of a composite resin restoration on the gingiva10.1016/0022-3913(72)90241-7 ↗
58. Iatrogenic Damage to Periodontium by Restorative Treatment Procedures: An Overview10.2174/1874210601509010217 ↗
59. Effects of two low-shrinkage composites on dental stem cells (viability, cell damaged or apoptosis and mesenchymal markers expression)10.1007/s10856-013-4849-x ↗
60. Evaluation of bio-based monomers from isosorbide used in the formulation of dental composite resins10.1016/j.jmbbm.2019.103371 ↗
61. Elution behavior of a 3D-printed, milled and conventional resin-based occlusal splint material10.1016/j.dental.2021.01.024 ↗
62. Effect of N-acetylcysteine on Rat Dental Pulp Cells Cultured on Mineral Trioxide Aggregate10.1016/j.joen.2011.02.012 ↗
63. N-Acetyl cysteine (NAC) inhibits proliferation, collagen gene transcription, and redox stress in rat palatal mucosal cells10.1016/j.dental.2009.07.006 ↗
64. N-acetyl cysteine protects osteoblastic function from oxidative stress10.1002/jbm.a.33211 ↗
65. Alleviation of commercial collagen sponge- and membrane-induced apoptosis and dysfunction in cultured osteoblasts by an amino acid derivative
66. N-acetyl cysteine improves affinity of beta-tricalcium phosphate granules for cultured osteoblast-like cells10.1177/0885328210383598 ↗
67. N-acetyl cysteine as an osteogenesis-enhancing molecule for bone regeneration10.1016/j.biomaterials.2013.04.064 ↗
68. N-acetyl cysteine alleviates cytotoxicity of bone substitute10.1177/0022034510363243 ↗
69. Nonvolatile buffer coating of titanium to prevent its biological aging and for drug delivery10.1016/j.biomaterials.2010.02.061 ↗
70. N-acetyl cysteine protects TMJ chondrocytes from oxidative stress10.1177/0022034510388035 ↗
71. Improvement in the osteoblastic cellular response to a commercial collagen membrane and demineralized freeze-dried bone by an amino acid derivative: An in vitro study10.1111/j.1600-0501.2010.01975.x ↗
72. Saruta, J., Ozawa, R., Hamajima, K., Saita, M., Sato, N., Ishijima, M., Kitajima, H., and Ogawa, T. (2021). Prolonged Post-Polymerization Biocompatibility of Polymethylmethacrylate-Tri-n-Butylborane (PMMA-TBB) Bone Cement. Materials, 14.10.3390/ma14051289 ↗
73. Okubo, T., Ikeda, T., Saruta, J., Tsukimura, N., Hirota, M., and Ogawa, T. (2020). Compromised Epithelial Cell Attachment after Polishing Titanium Surface and Its Restoration by UV Treatment. Materials, 13.10.3390/ma13183946 ↗
74. Novel antioxidant capability of titanium induced by UV light treatment10.1016/j.biomaterials.2016.08.050 ↗
75. Efficacy and cytotoxicity of cationic-agent-mediated nonviral gene transfer into osteoblasts10.1002/jbm.a.30160 ↗
76. Biological and osseointegration capabilities of hierarchically (meso-/micro-/nano-scale) roughened zirconia10.2147/IJN.S159955 ↗
77. High-throughput gene expression analysis in bone healing around titanium implants by DNA microarray10.1111/j.1600-0501.2007.01432.x ↗
78. Yamada, M., Watanabe, J., Ueno, T., Ogawa, T., and Egusa, H. (2019). Cytoprotective Preconditioning of Osteoblast-Like Cells with N-Acetyl-L-Cysteine for Bone Regeneration in Cell Therapy. Int. J. Mol. Sci., 20.10.3390/ijms20205199 ↗