journal article·2022-09-23Open access

Enhanced In Vitro Biocompatible Polycaprolactone/Nano-Hydroxyapatite Scaffolds with Near-Field Direct-Writing Melt Electrospinning Technology

Zhijun Chen, Yanbo Liu, Juan Huang, Han Wang, Ming Hao, Xiaodong Hu, Xiaoming Qian, Jintu Fan, Hongjun Yang, Bo Yang

Abstract

Polycaprolactone (PCL) scaffold is a common biological material for tissue engineering, owing to its good biocompatibility, biodegradability and plasticity. However, it is not suitable for osteoblast adhesion and regeneration of bone tissue due to its non-biological activity, poor mechanical strength, slow degradation speed, smooth surface and strong hydrophobicity. To improve the mechanical properties and biocompatibility of PCL scaffold, the PCL/nHA scaffolds were prepared by melting and blending different proportions of nano-hydroxyapatite (nHA) with PCL by the near-field direct-writing melt electrospinning technology in this study. The morphology, porosity, mechanical properties and in vitro biocompatibility of the PCL/nHA scaffolds were studied. The results showed that when the proportion of nHA was less than or equal to 25%, PCL/nHA composite scaffolds were easily formed in which bone marrow mesenchymal stem cells proliferated successfully. When the proportion of nHA was 15%, the PCL/nHA composite scaffolds had excellent structural regularity, good fiber uniformity, outstanding mechanical stability and superior biocompatibility. The PCL/nHA composite scaffolds were ideal scaffold materials, which would broaden their applications for bone tissue engineering.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Bone Tissue Engineering Materials · Electrospun Nanofibers in Biomedical Applications · biodegradable polymer synthesis and properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

State Key Laboratory of Separation Membranes and Membrane Processes, School of Textile Science and Engineering, Tiangong University, Tianjin 300387, China

State Key Laboratory of New Textile Materials and Advanced Processing Technologies, School of Textile Science and Engineering, Wuhan Textile University, Wuhan 430200, China

School of Materials Science and Engineering, Wuhan Textile University, Wuhan 430200, China

Funding

the National Science Foundation of China · the Natural Science Foundation of Hubei Province

References (37)

Show source-provided references
1. A radial 3D polycaprolactone nanofiber scaffold modified by biomineralization and silk fibroin coating promote bone regeneration in vivo10.1016/j.ijbiomac.2021.01.036 ↗
2. Supphaprasitt, W., Charoenmuang, L., Thuaksuban, N., Sangsuwan, P., Leepong, N., Supakanjanakanti, D., Vongvatcharanon, S., Suwanrat, T., and Srimanok, W. (2022). A Three-Dimensional Printed Polycaprolactone–Biphasic-Calcium-Phosphate Scaffold Combined with Adipose-Derived Stem Cells Cultured in Xenogeneic Serum-Free Media for the Treatment of Bone Defects. J. Funct. Biomater., 13.10.3390/jfb13030093 ↗
3. Cho, Y.S., Gwak, S.-J., and Cho, Y.-S. (2021). Fabrication of Polycaprolactone/Nano Hydroxyapatite (PCL/nHA) 3D Scaffold with Enhanced In Vitro Cell Response via Design for Additive Manufacturing (DfAM). Polymers, 13.10.3390/polym13091394 ↗
4. Heparan sulfate loaded polycaprolactone-hydroxyapatite scaffolds with 3D printing for bone defect repair10.1016/j.ijbiomac.2020.01.109 ↗
5. Hassan, M., Sulaiman, M., Yuvaraju, P.D., Galiwango, E., Rehman, I.u., Al-Marzouqi, A.H., Khaleel, A., and Mohsin, S. (2022). Biomimetic PLGA/Strontium-Zinc Nano Hydroxyapatite Composite Scaffolds for Bone Regeneration. J. Funct. Biomater., 13.10.3390/jfb13010013 ↗
6. Fabrication and in-vitro biocompatibility of freeze-dried CTS-nHA and CTS-nBG scaffolds for bone regeneration applications10.1016/j.ijbiomac.2020.01.035 ↗
7. Assessing physicochemical, mechanical, and in vitro biological properties of polycaprolactone/poly(glycerol sebacate)/hydroxyapatite composite scaffold for nerve tissue engineering10.1016/j.matchemphys.2021.125224 ↗
8. Effect of recombinant BMP-2 and erythropoietin on osteogenic properties of biomimetic PLA/PCL/HA and PHB/HA scaffolds in critical-size cranial defects model10.1016/j.msec.2022.112680 ↗
9. Biomimetic 3D-printed PCL scaffold containing a high concentration carbonated-nanohydroxyapatite with immobilized-collagen for bone tissue engineering: Enhanced bioactivity and physicomechanical characteristics10.1088/1748-605X/ac3147 ↗
10. A bird’s eye view on the use of electrospun nanofibrous scaffolds for bone tissue engineering: Current state-of-the-art, emerging directions and future trends10.1016/j.nano.2016.05.014 ↗
11. Kim, Y., Lee, E.-J., Kotula, A.P., Takagi, S., Chow, L., and Alimperti, S. (2022). Engineering 3D Printed Scaffolds with Tunable Hydroxyapatite. J. Funct. Biomater., 13.10.3390/jfb13020034 ↗
12. The application of BMP-12-overexpressing mesenchymal stem cells loaded 3D-printed PLGA scaffolds in rabbit rotator cuff repair10.1016/j.ijbiomac.2019.07.041 ↗
13. Design and manufacturing of 3D high-precision micro-fibrous poly (l-lactic acid) scaffold using melt electrowriting technique for bone tissue engineering10.1016/j.matdes.2021.110063 ↗
14. Development and assessment of modified-honeycomb-structure scaffold for bone tissue engineering
15. Development of Satureja cuneifolia-loaded sodium alginate/polyethylene glycol scaffolds produced by 3D-printing technology as a diabetic wound dressing material10.1016/j.ijbiomac.2020.06.086 ↗
16. Fuchs, A., Youssef, A., Seher, A., Hochleitner, G., Dalton, P.D., Hartmann, S., Brands, R.C., Müller-Richter, U.D.A., and Linz, C. (2019). Medical-grade polycaprolactone scaffolds made by melt electrospinning writing for oral bone regeneration—A pilot study in vitro. BMC Oral Health, 19.10.1186/s12903-019-0717-5 ↗
17. Melt spinning of nano-hydroxyapatite and polycaprolactone composite fibers for bone scaffold application10.1007/s10853-019-03475-y ↗
18. Novel polycaprolactone/hydroxyapatite nanocomposite fibrous scaffolds by direct melt-electrospinning writing10.1016/j.eurpolymj.2018.05.034 ↗
19. Fabrication of heterogeneous scaffolds using melt electrospinning writing: Design and optimization10.1016/j.matdes.2019.108274 ↗
20. Identification of sagging in melt-electrospinning of microfiber scaffolds10.1016/j.msec.2019.109785 ↗
21. Daghrery, A., de Souza Araújo, I.J., Castilho, M., Malda, J., and Bottino, M.C. (Acta Biomater., 2022). Unveiling the potential of melt electrowriting in regenerative dental medicine, Acta Biomater., in press.10.1016/j.actbio.2022.01.010 ↗
22. Can-Herrera, L.A., Oliva, A.I., Dzul-Cervantes, M.A.A., Pacheco-Salazar, O.F., and Cervantes-Uc, J.M. (2021). Mechanical Properties of Electrospun Polycaprolactone Scaffolds: Effect of Applied, V. Polymers, 13.10.3390/polym13040662 ↗
23. Mirică, I.-C., Furtos, G., Lucaciu, O., Pascuta, P., Vlassa, M., Moldovan, M., and Campian, R.-S. (2021). Electrospun Membranes Based on Polycaprolactone, Nano-Hydroxyapatite and Metronidazole. Materials, 14.10.3390/ma14040931 ↗
24. Chitosan-based 3D-printed scaffolds for bone tissue engineering10.1016/j.ijbiomac.2021.05.215 ↗
25. A femoral shape porous scaffold bio-nanocomposite fabricated using 3D printing and freeze-drying technique for orthopedic application10.1016/j.matchemphys.2021.125302 ↗
26. Scaffold Fabrication Technologies and Structure/Function Properties in Bone Tissue Engineering10.1002/adfm.202010609 ↗
27. Phosphorus-containing flame retardant epoxy thermosets: Recent advances and future perspectives10.1016/j.progpolymsci.2021.101366 ↗
28. Additive manufacture of PCL/nHA scaffolds reinforced with biodegradable continuous Fibers: Mechanical Properties, in-vitro degradation Profile, and cell study10.1016/j.eurpolymj.2021.110876 ↗
29. Programmable, biodegradable composite scaffolds with variable pore morphology for minimal invasive bone repair10.1016/j.compositesa.2022.107130 ↗
30. Marrese, M., Cirillo, V., Guarino, V., and Ambrosio, L. (2018). Short-Term Degradation of Bi-Component Electrospun Fibers: Qualitative and Quantitative Evaluations via AFM Analysis. J. Funct. Biomater., 9.10.3390/jfb9020027 ↗
31. Bone tissue engineering techniques, advances, and scaffolds for treatment of bone defects10.1016/j.cobme.2020.100248 ↗
32. From nano to micro to macro: Electrospun hierarchically structured polymeric fibers for biomedical applications10.1016/j.progpolymsci.2017.12.003 ↗
33. Structure-induced cell growth by 3D printing of heterogeneous scaffolds with ultrafine fibers10.1016/j.matdes.2019.108092 ↗
34. Chen, Z., Liu, Y., Huang, J., Hao, M., Hu, X., Qian, X., Fan, J., Yang, H., and Yang, B. (2022). Influences of Process Parameters of Near-Field Direct-Writing Melt Electrospinning on Performances of Polycaprolactone/Nano-Hydroxyapatite Scaffolds. Polymers, 14.10.3390/polym14163404 ↗
35. Characterization on Modification and Biocompatibility of PCL Scaffold Prepared with Near-field Direct-writing Melt Electrospinning10.1007/s40242-021-1129-z ↗
36. Melt Electrospinning of Nanofibers from Medical-Grade Poly(ε-Caprolactone) with a Modified Nozzle10.1002/smll.202003471 ↗
37. Pharmaceutical electrospinning and 3D printing scaffold design for bone regeneration10.1016/j.addr.2021.05.007 ↗