Dissolution Behavior of Hydrothermally Treated Hydroxyapatite–Titanium Nitride Films Coated on PEEK: In Vitro Study
Source abstract
Abstract
Polyetheretherketone (PEEK) has become an alternative material for orthopaedics and dental implants. However, bio-inertness is an important limitation in this material. In the present study, a hydroxyapatite (HA)–titanium nitride (TiN) coating was fabricated via pulsed DC magnetron sputtering and treated with hydrothermal treatment to improve the bioactive property of PEEK. The dissolution behavior of the coating was studied in simulated body fluid solution (SBF) at 1, 3, 5, 7, 14, 21, 28, and 56 days. The coating surface was analyzed before and after the immersion process by X-ray photoelectron spectroscopy (XPS), atomic force microscope (AFM), and scanning electron microscope (SEM). The calcium and phosphorus concentration alteration in SBF was quantified by an inductively coupled plasma-optical emission spectrometer (ICP-OES). Coating dissolution and the precipitation of calcium phosphate complex from SBF were observed as occurring suddenly and continuously throughout the immersion times. These processes resulted in an alteration in both physical and chemical coating properties. After 56 days, the coating remained on PEEK surfaces and the Ca/P ratio was 1.16. These results indicate that HA-TiN coating via pulsed DC magnetron sputtering followed by hydrothermal treatment improved the bioactivity of materials and provided a potential benefit to orthopedics and dental applications.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Bone Tissue Engineering Materials · Orthopaedic implants and arthroplasty · Dental materials and restorations
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Prosthodontics, Faculty of Dentistry, Chiang Mai University, Chiang Mai 50200, Thailand
Plasma and Beam Physics Research Facility, Department of Physics & Materials Science, Faculty of Science, Chiang Mai University, Chiang Mai 50200, Thailand
References (51)
Show source-provided references
1. Polyetheretherketone as a biomaterial for spinal applications10.1016/j.biomaterials.2005.07.011 ↗
2. The Role of Polyether Ether Ketone (Peek) in Dentistry—A Review10.25122/jml-2019-0003 ↗
3. PEEK (Polyether-ether-ketone) and its composite materials in orthopedic implantation10.1016/j.arabjc.2020.102977 ↗
4. PEEK biomaterials in trauma, orthopedic, and spinal implants10.1016/j.biomaterials.2007.07.013 ↗
5. Qin, L., Yao, S., Zhao, J., Zhou, C., Oates, T.W., Weir, M.D., Wu, J., and Xu, H.H.K. (2021). Review on Development and Dental Applications of Polyetheretherketone-Based Biomaterials and Restorations. Materials, 14.10.3390/ma14020408 ↗
6. Current strategies to improve the bioactivity of PEEK10.3390/ijms15045426 ↗
7. Preparation Methods for Improving PEEK’s Bioactivity for Orthopedic and Dental Application: A Review10.1155/2016/8202653 ↗
8. Physical Modification of Polyetheretherketone for Orthopedic Implants10.1007/s11706-014-0266-4 ↗
9. Bone healing around titanium and titanium nitride-coated dental implants with three surfaces: An experimental study in rats10.1111/j.1708-8208.2003.tb00191.x ↗
10. The process of physical weakening and dissolution of the HA-coated implant in bone and soft tissue10.1177/00220345980770060701 ↗
11. Titanium-Nitride Coating of Orthopaedic Implants: A Review of the Literature
12. Surface Characterization of Hydroxyapatite and Related Calcium Phosphates by XPS and TOF-SIMS10.1021/ac990812h ↗
13. A review of hydroxyapatite-based coating techniques: Sol–gel and electrochemical depositions on biocompatible metals10.1016/j.jmbbm.2015.11.031 ↗
14. In vitro evaluation of amorphous calcium phosphate and poorly crystallized hydroxyapatite coatings on titanium implants10.1002/jbm.820270114 ↗
15. Characterization of titanium nitride–hydroxyapatite on PEEK for dental implants by co-axis target magnetron sputtering10.1016/j.surfcoat.2016.05.063 ↗
16. (2022, June 27). Material Data Center. Available online: https://www.materialdatacenter.com/ms/en/tradenames/Peek-Optima/Invibio®+Biomaterial+Solutions/PEEK-OPTIMA®+Natural+LT1/df67965d/6411.
17. Fundamental understanding and modeling of reactive sputtering processes10.1016/j.tsf.2004.10.051 ↗
18. Magnetron sputtering technique used for coatings deposition; technologies and applications
19. Influence of the substrate bias on the stoichiometry and structure of RF-magnetron sputter-deposited silver containing calcium phosphate coatings10.1002/mawe.201300101 ↗
20. Application of magnetron sputtering for producing ceramic coatings on implant materials10.1034/j.1600-0501.1993.040104.x ↗
21. In vivo dissolution behavior of various RF magnetron sputtered Ca-P coatings10.1002/(SICI)1097-4636(19980315)39:4<524::AID-JBM3>3.0.CO;2-L ↗
22. Bone bonding strength of sputtered hydroxyapatite films subjected to a low temperature hydrothermal treatment
23. Dissolution behavior and in vitro evaluation of sputtered hydroxyapatite films subject to a low temperature hydrothermal treatment10.1002/jbm.a.30574 ↗
24. Effect of water vapor pressure and temperature on the amorphous-to-crystalline HA conversion during heat treatment of HA coatings10.1002/(SICI)1097-4636(199708)36:2<242::AID-JBM13>3.0.CO;2-I ↗
25. Influence of post-deposition heating time and the presence of water vapor on sputter-coated calcium phosphate crystallinity10.1177/154405910308201014 ↗
26. Low Temperature Crystallization and Structural Modification of Plasma-Sprayed Hydroxyapatite Coating with Hydrothermal Treatment
27. Buranapanich, V., Boonyawan, D., Sutiat, K., and Yavirach, P. (2020, January 26). Effect of temperature and treatment time of hydrothermal treatment on crystallization of titanium nitride-hydroxyapatite films coated on polyetheretherketone. Proceedings of the AIP Conference Proceedings, Pattaya, Thailand.10.1063/5.0023655 ↗
28. Effect of hydroxyapatite coating crystallinity on dissolution and osseointegration in vivo10.1002/jbm.a.30323 ↗
29. Wang, H., Yuan, L., and An, J. (2017). Crystallographic Characteristics of Hydroxylapatite in Hard Tissues of Cololabis saira. Crystals, 7.10.3390/cryst7040103 ↗
30. Dissolution and mineralization behaviors of HA coatings10.1016/S0142-9612(03)00371-5 ↗
31. Influence of discharge power level on the properties of hydroxyapatite films deposited on Ti6A14V with RF magnetron sputtering10.1002/jbm.820290218 ↗
32. Fabrication and Physical Properties of Titanium Nitride/Hydroxyapatite Composites on Polyether Ether Ketone by RF Magnetron Sputtering Technique10.1088/1742-6596/901/1/012131 ↗
33. Characteristics of the Deposition Rate per Unit Power on Pulsed-DC Magnetron Sputtering Source10.1002/ppap.200900026 ↗
34. The Influence of Pulse Frequency and Duty on the Deposition Rate in Pulsed Magnetron Sputtering10.1002/ppap.200600159 ↗
35. Chase, M.W. (1998). NIST-JANAF Thermochemical Tables, National Institute of Standards and Technology. [4th ed.]. American Chemical Society.
36. Corrosion resistance of TiO2 films grown on stainless steel by atomic layer deposition10.1016/j.surfcoat.2007.08.066 ↗
37. Low-temperature deposition of anatase TiO2 on medical grade polyetheretherketone to assist osseous integration10.1016/j.surfcoat.2009.06.018 ↗
38. Thermal Analysis of Amorphous Phase in Hydroxyapatite Coatings10.1111/j.1151-2916.1998.tb02301.x ↗
39. Bioactive glass particulate material as a filler for bone lesions10.1111/j.1365-2842.1991.tb01689.x ↗
40. Nanostructured calcium phosphates for biomedical applications: Novel synthesis and characterization10.1016/j.actbio.2004.09.008 ↗
41. Increased osteoblast adhesion on nanoparticulate calcium phosphates with higher Ca/P ratios10.1002/jbm.a.31555 ↗
42. An in vitro evaluation of the Ca/P ratio for the cytocompatibility of nano-to-micron particulate calcium phosphates for bone regeneration10.1016/j.actbio.2008.02.025 ↗
43. Dissolution kinetics of calcium phosphate coatings10.1097/00008505-199807040-00011 ↗
44. The effect of calcium ion concentration on osteoblast viability, proliferation and differentiation in monolayer and 3D culture10.1016/j.biomaterials.2005.01.006 ↗
45. Calcium phosphate coatings for bio-implant applications: Materials, performance factors, and methodologies10.1016/j.mser.2009.05.001 ↗
46. Surface roughness, porosity, and texture as modifiers of cellular adhesion10.1089/ten.1996.2.241 ↗
47. Effect of immersion time in simulated body fluid on adhesion strength of hydrothermally treated hydroxyapatite- titanium nitride films on polyetheretherketones
48. Titanium (Ti) cages may be superior to polyetheretherketone (PEEK) cages in lumbar interbody fusion: A systematic review and meta-analysis of clinical and radiological outcomes of spinal interbody fusions using Ti versus PEEK cages10.1007/s00586-021-06748-w ↗
49. Bioactivity and Osseointegration of PEEK Are Inferior to Those of Titanium: A Systematic Review10.1563/aaid-joi-D-16-00072 ↗
50. Nanomodified Peek Dental Implants: Bioactive Composites and Surface Modification-A Review10.1155/2015/381759 ↗
51. Anil, S., Anand, P., Alghamdi, H., and Jansen, J.A. (2011). Dental Implant Surface Enhancement and Osseointegration. Implant Denistry—A Rapid Evolving Practic, IntechOpen.10.5772/16475 ↗