journal article·2021-05-18Open access

TiAl6V4 Alloy Surface Modifications and Their Impact on Biofilm Development of S. aureus and S. epidermidis

Astrid H. Paulitsch-Fuchs, Lukas Wolrab, Nicole Eck, Nigel P. Dyer, Benjamin Bödendorfer, Birgit Lohberger

Abstract

One of the most serious complications following joint replacement surgeries are periprosthetic infections (PIs) arising from the adhesion of bacteria to the artificial joint. Various types of titanium–aluminum–vanadium (TiAl6V4) alloy surface modifications (coatings with silver (Ag), titanium nitride (TiN), pure titanium (cpTi), combinations of cpTi and hydroxyapatite (HA), combinations of cpTi and tricalcium phosphate (TCP), and a rough-blasted surface of TiAl6V4) have been investigated to assess their effects on biofilm development. Biofilms were grown, collected, and analyzed after 48 h to measure their protein and glucose content and the cell viability. Biofilm-associated genes were also monitored after 48 h of development. There was a distinct difference in the development of staphylococcal biofilms on the surfaces of the different types of alloy. According to the findings of this study, the base alloy TiAl6V4 and the TiN-coated surface are the most promising materials for biofilm reduction. Rough surfaces are most favorable when it comes to bacterial infections because they allow an easy attachment of pathogenic organisms. Of all rough surfaces tested, rough-blasted TiAl6V4 was the most favorable as an implantation material; all the other rough surfaces showed more distinct signs of inducing the development of biofilms which displayed higher protein and polysaccharide contents. These results are supported by RT-qPCR measurements of biofilm associated genes for Staphylococcus aureus (icaA, icaC, fnbA, fnbB, clfB, atl) and Staphylococcus epidermidis (atle, aap).
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Orthopaedic implants and arthroplasty · Titanium Alloys Microstructure and Properties · Dental materials and restorations

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Biomedical Sciences, University of Applied Sciences Carinthia, 9020 Klagenfurt, Austria

Diagnostic and Research Institute of Hygiene, Microbiology and Environmental Medicine, Medical University of Graz, 8010 Graz, Austria

Department of Orthopaedics and Trauma, Medical University of Graz, 8036 Graz, Austria

Bioinformatics Research Technology Platform, University of Warwick, Coventry CV4 7AL, UK

Funding

Österreichische Forschungsförderungsgesellschaft

References (63)

Show source-provided references
1. Characteristics and outcome of infections associated with tumor endoprostheses10.1007/s00402-005-0009-1 ↗
2. Staphylococcus aureus biofilm: A complex developmental organism10.1111/mmi.13634 ↗
3. Biolims
4. Shukla, S.K., Mangwani, N., Karley, D., and Subba Rao, T. (2017). Bacterial biofilms and genetic regulation for metal detoxification. Handb. Met. Interact. Bioremediation, 317–332.10.1201/9781315153353-22 ↗
5. Kranjec, C., Angeles, D.M., Mårli, M.T., Fernández, L., García, P., Kjos, M., and Diep, D.B. (2021). Staphylococcal biofilms: Challenges and novel therapeutic perspectives. Antibiotics, 10.10.3390/antibiotics10020131 ↗
6. Periprosthetic infection in patients treated for an orthopaedic oncological condition10.2106/00004623-200504000-00021 ↗
7. Two-stage revision for infected endoprostheses used in tumor surgery10.1097/00003086-200202000-00022 ↗
8. Survival of current production tumor endoprostheses: Complications, functional results, and a comparative statistical analysis10.1002/jso.23414 ↗
9. Total hip arthroplasty revision due to infection: A cost analysis approach10.1016/j.otsr.2009.11.004 ↗
10. Deing, A., Luthringer, B., Laipple, D., Ebel, T., and Willumeit, R. (2014). A porous TiAl6V4 implant material for medical application. Int. J. Biomater., 2014.10.1155/2014/904230 ↗
11. Munir, K., Biesiekierski, A., Wen, C., and Li, Y. (2020). Surface modifications of metallic biomaterials. Metallic Biomaterials Processing and Medical Device Manufacturing, Elsevier.10.1016/B978-0-08-102965-7.00012-6 ↗
12. Xue, T., Attarilar, S., Liu, S., Liu, J., Song, X., Li, L., Zhao, B., and Tang, Y. (2020). Surface modification techniques of titanium and its alloys to functionally optimize their biomedical properties: Thematic review. Front. Bioeng. Biotechnol.10.3389/fbioe.2020.603072 ↗
13. Liu, J., Liu, J., Attarilar, S., Wang, C., Tamaddon, M., Yang, C., Xie, K., Yao, J., Wang, L., and Liu, C. (2020). Nano-Modified Titanium Implant Materials: A Way Toward Improved Antibacterial Properties. Front. Bioeng. Biotechnol.10.3389/fbioe.2020.576969 ↗
14. Grabarczyk, J., Batory, D., Kaczorowski, W., Januszewicz, B., Burnat, B., Czerniak-Reczulska, M., Makówka, M., and Niedzielski, P. (2020). Comparison of Different Thermo-Chemical Treatments Methods of Ti-6Al-4V Alloy in Terms of Tribological and Corrosion Properties. Materials, 13.10.3390/ma13225192 ↗
15. Comparative analysis of corrosion resistance between beta titanium and Ti-6Al-4V alloys: A systematic review10.1016/j.jtemb.2020.126618 ↗
16. Attarilar, S., Salehi, M.T., Al-Fadhalah, K.J., Djavanroodi, F., and Mozafari, M. (2019). Functionally graded titanium implants: Characteristic enhancement induced by combined severe plastic deformation. PLoS ONE, 14.10.1371/journal.pone.0221491 ↗
17. Mechanical behavior and phase transformation of b-type Ti-35Nb-2Ta-3Zr alloy fabricated by 3D-Printing10.1016/j.jallcom.2019.03.138 ↗
18. Biological response of chemically treated surface of the ultrafine-grained Ti-6Al-7Nb alloy for biomedical applications10.2147/IJN.S197099 ↗
19. Nanocrystalline Ti49.2Ni50.8 shape memory alloy as orthopaedic implant material with better performance10.1016/j.jmst.2019.04.026 ↗
20. Leonetti, S., Tuvo, B., Campanella, B., Legnaioli, S., Onor, M., Bramanti, E., Totaro, M., Baggiani, A., Giorgi, S., and Privitera, G.P. (2020). Evaluation of microbial adhesion and biofilm formation on nano-structured and nano-coated ortho-prosthetic materials by a dynamic model. Int. J. Environ. Res. Public Health, 17.10.3390/ijerph17031013 ↗
21. Meinshausen, A.K., Herbster, M., Zwahr, C., Soldera, M., Müller, A., Halle, T., Lasagni, A.F., and Bertrand, J. (2021). Aspect ratio of nano/microstructures determines Staphylococcus aureus adhesion on PET and titanium surfaces. J. Appl. Microbiol.10.1111/jam.15033 ↗
22. van Hengel, I.A.J., Tierolf, M.W.A.M., Fratila-Apachitei, L.E., Apachitei, I., and Zadpoor, A.A. (2021). Antibacterial Titanium Implants Biofunctionalized by Plasma Electrolytic Oxidation with Silver, Zinc, and Copper: A Systematic Review. Int. J. Mol. Sci., 22.10.3390/ijms22073800 ↗
23. Pranno, N., Monaca, G.L., Polimeni, A., Sarto, M.S., Uccelletti, D., Bruni, E., Cristalli, M.P., Cavallini, D., and Vozza, I. (2020). Antibacterial activity against staphylococcus aureus of titanium surfaces coated with graphene nanoplatelets to prevent peri-implant diseases. An in-vitro pilot study. Int. J. Environ. Res. Public Health, 17.10.3390/ijerph17051568 ↗
24. Minkiewicz-Zochniak, A., Jarzynka, S., Iwańska, A., Strom, K., Iwańczyk, B., Bartel, M., Mazur, M., Pietruczuk-Padzik, A., Konieczna, M., and Augustynowicz-Kopeć, E. (2021). Biofilm Formation on Dental Implant Biomaterials by Staphylococcus aureus Strains Isolated from Patients with Cystic Fibrosis. Materials, 14.10.3390/ma14082030 ↗
25. Cochis, A., Barberi, J., Ferraris, S., Miola, M., Rimondini, L., Vernè, E., Yamaguchi, S., and Spriano, S. (2020). Competitive Surface Colonization of Antibacterial and Bioactive Materials Doped with Strontium and/or Silver Ions. Nanomaterials, 10.10.3390/nano10010120 ↗
26. Palka, L., Mazurek-Popczyk, J., Arkusz, K., and Baldy-Chudzik, K. (2020). Susceptibility to biofilm formation on 3D-printed titanium fixation plates used in the mandible: A preliminary study. J. Oral Microbiol., 12.10.1080/20002297.2020.1838164 ↗
27. Reduction of periprosthetic infection with silver-coated megaprostheses in patients with bone sarcoma10.1002/jso.21498 ↗
28. Balaure, P.C., and Grumezescu, A.M. (2020). Recent advances in surface nanoengineering for biofilm prevention and control. Part i: Molecular basis of biofilm recalcitrance. passive anti-biofouling nanocoatings. Nanomaterials, 10.10.3390/nano10061230 ↗
29. (2021, May 16). ISO-ISO 5832-3:2016—Implants for Surgery—Metallic Materials—Part 3: Wrought Titanium 6-Aluminium 4-Vanadium Alloy. Available online: https://www.iso.org/standard/66637.html.
30. (2021, May 16). ISO 6892-1:2019(en), Metallic Materials—Tensile Testing—Part 1: Method of Test at Room Temperature. Available online: https://www.iso.org/obp/ui/#iso:std:iso:6892:-1:ed-3:v1:en.
31. (2021, May 16). DIN EN ISO 4521-2009-01-Beuth.de. Available online: https://www.beuth.de/en/standard/din-en-iso-4521/108554337.
32. Biogenic synthesis of silver nanoparticles and their synergistic effect with antibiotics: A study against gram-positive and gram-negative bacteria10.1016/j.nano.2009.04.006 ↗
33. The use of silver coating in hip megaprostheses: A systematic review10.1177/1120700018811070 ↗
34. Lohberger, B., Eck, N., Glaenzer, D., Kaltenegger, H., and Leithner, A. (2021). Surface modifications of Titanium Aluminium Vanadium Improve Biocompatibility and Osteogenic Differentiation Potential. Materials, 14.10.3390/ma14061574 ↗
35. Influence of surface coating on metal ion release: Evaluation in patients with metal allergy10.3928/01477447-20160509-08 ↗
36. Ti based biomaterials, the ultimate choice for orthopaedic implants-A review10.1016/j.pmatsci.2008.06.004 ↗
37. (2021, May 16). ISO-ISO 4287:1997—Geometrical Product Specifications (GPS)—Surface Texture: Profile Method—Terms, Definitions and Surface Texture Parameters. Available online: https://www.iso.org/standard/10132.html.
38. (2021, May 16). ISO-ISO 4288:1996—Geometrical Product Specifications (GPS)—Surface Texture: Profile Method—Rules and Procedures for the Assessment of Surface Texture. Available online: https://www.iso.org/standard/2096.html.
39. (2021, May 16). ISO-ISO 13779-1:2008—Implants for Surgery—Hydroxyapatite—Part 1: Ceramic Hydroxyapatite. Available online: https://www.iso.org/standard/43826.html.
40. (2021, May 16). ASTM F1147-05(2017)e1 Standard Test Method for Tension Testing of Calcium Phosphate and Metallic Coatings. Available online: https://www.astm.org/Standards/F1147.htm.
41. (2021, May 16). ASTM F1044-05(2017)e1 Standard Test Method for Shear Testing of Calcium Phosphate Coatings and Metallic Coatings. Available online: https://www.astm.org/Standards/F1044.htm.
42. Hydroxyapatite coatings for biomedical applications deposited by different thermal spray techniques10.1016/j.surfcoat.2010.03.059 ↗
43. Comparison between titan and cobalt hydroxyapatite-coated shoulder prosthesis, during external and internal rotation10.1007/978-3-642-32548-9_14 ↗
44. Effect of HAp and β-TCP incorporation on the tribological response of Ti6Al4V biocomposites for implant parts10.1002/jbm.b.33908 ↗
45. Rough surfaces of titanium and titanium alloys for implants and prostheses10.1016/j.msec.2004.08.004 ↗
46. Quantitative determination of pneumococcal capsular polysaccharide serotype 14 using a modification of phenol-sulfuric acid method10.1016/S0167-7012(02)00151-3 ↗
47. (2020). SPSS, version 25, IBM.
48. Lohberger, B., Stuendl, N., Glaenzer, D., Rinner, B., Donohue, N., Lichtenegger, H.C., Ploszczanski, L., and Leithner, A. (2020). CoCrMo surface modifications affect biocompatibility, adhesion, and inflammation in human osteoblasts. Sci. Rep., 10.10.1038/s41598-020-58742-9 ↗
49. Analysis of relative gene expression data using real-time quantitative PCR and the 2-ΔΔCT method10.1006/meth.2001.1262 ↗
50. Quantitative PCR analysis of genes expressed during biofilm development of methicillin resistant Staphylococcus aureus (MRSA)10.1016/j.meegid.2013.05.002 ↗
51. The Interaction of N-Acetylcysteine and Serum Transferrin Promotes Bacterial Biofilm Formation10.1159/000487566 ↗
52. Gene expression during S. epidermidis biofilm formation on biomaterials10.1002/jbm.a.34221 ↗
53. Protein adsorption on implant metals with various deformed surfaces10.1016/j.colsurfb.2017.05.015 ↗
54. Biofilm Matrix Proteins10.1128/9781555817466.ch10 ↗
55. Effect of surface roughness of biomaterials on Staphylococcus epidermidis adhesion10.1186/s12866-014-0234-2 ↗
56. Genetic basis and importance of metal resistant genes in bacteria for bioremediation of contaminated environments with toxic metal pollutants10.1007/s00253-016-7364-4 ↗
57. Bacterial Extracellular Polysaccharides in Biofilm Formation and Function10.1128/microbiolspec.MB-0011-2014 ↗
58. Effect of antimicrobial and physical treatments on growth of multispecies staphylococcal biofilms10.1128/AEM.03483-16 ↗
59. Polysaccharide intercellular adhesin in biofilm: Structural and regulatory aspects10.3389/fcimb.2015.00007 ↗
60. Differential Gene Expression Profiling of Staphylococcus aureus Cultivated under Biofilm and Planktonic Conditions10.1128/AEM.71.5.2663-2676.2005 ↗
61. A novel Staphylococcus aureus biofilm phenotype mediated by the fibronectin-binding proteins, FnBPA and FnBPB10.1128/JB.00167-08 ↗
62. Protein-based biofilm matrices in staphylococci10.3389/fcimb.2014.00171 ↗
63. Extracellular matrix structure governs invasion resistance in bacterial biofilms10.1038/ismej.2014.246 ↗