Antimicrobial Activity of Nitric Oxide-Releasing Ti-6Al-4V Metal Oxide
Source abstract
Abstract
Titanium and titanium alloy materials are commonly used in joint replacements, due to the high strength of the materials. Pathogenic microorganisms can easily adhere to the surface of the metal implant, leading to an increased potential for implant failure. The surface of a titanium-aluminum-vanadium (Ti-6Al-4V) metal oxide implant material was functionalized to deliver an small antibacterial molecule, nitric oxide. S-nitroso-penicillamine, a S-nitrosothiol nitric oxide donor, was covalently immobilized on the metal oxide surface using self-assembled monolayers. Infrared spectroscopy was used to confirm the attachment of the S-nitrosothiol donor to the Ti-Al-4V surface. Attachment of S-nitroso-penicillamine resulted in a nitric oxide (NO) release of 89.6 ± 4.8 nmol/cm2 under physiological conditions. This low concentration of nitric oxide reduced Escherichia coli and Staphylococcus epidermidis growth by 41.5 ± 1.2% and 25.3 ± 0.6%, respectively. Combining the S-nitrosothiol releasing Ti-6Al-4V with tetracycline, a commonly-prescribed antibiotic, increased the effectiveness of the antibiotic by 35.4 ± 1.3%, which allows for lower doses of antibiotics to be used. A synergistic effect of ampicillin with S-nitroso-penicillamine-modified Ti-6Al-4V against S. epidermidis was not observed. The functionalized Ti-6Al-4V surface was not cytotoxic to mouse fibroblasts.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Marine Biology and Environmental Chemistry · Metal and Thin Film Mechanics · Bone Tissue Engineering Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Chemistry and Biochemistry, Duquesne University, Pittsburgh, PA 15282, USA
Division of Pharmaceutical Sciences, Duquesne University, Pittsburgh, PA 15282, USA
McGowan Institute for Regenerative Medicine, University of Pittsburgh, Pittsburgh, PA 15282, USA
References (54)
Show source-provided references
1. Titanium alloys in total joint replacement—A materials science perspective10.1016/S0142-9612(97)00146-4 ↗
2. Bonding organics to Ti alloys: Facilitating human osteoblast attachment and spreading on surgical impant materials10.1021/la0203436 ↗
3. Infection of orthopedic implants with emphasis on bacterial adhesion process and techniques used in studying bacterial-material interactions10.4161/biom.22905 ↗
4. Biomedical applications of titanium and its alloys10.1007/s11837-008-0031-1 ↗
5. Reducing implant-related infections: Active release strategies10.1039/b515219b ↗
6. Infections associated with orthopedic implants10.1097/01.qco.0000235161.85925.e8 ↗
7. Antibiotic resistance in common pathogens reinforces the need to minimise surgical site infections10.1016/S0195-6701(08)60019-5 ↗
8. Centers for Disease Control and Prevention (2013). Antibiotic Resistance Threats in the United States.
9. Anti-biofilm efficacy of nitric oxide-releasing silica nanoparticles10.1016/j.biomaterials.2009.01.052 ↗
10. Bactericidal efficacy of nitric oxide-releasing silica nanoparticles10.1021/nn700191f ↗
11. Decreasing bacterial colonization of external fixation pins via nitric oxide release coatings10.1097/BOT.0b013e3181f9ac8a ↗
12. Nitric oxide-releasing sol–gels as antibacterial coatings for orthopedic implants10.1016/j.biomaterials.2004.03.031 ↗
13. Role of size and shape on biofilm eradication for nitric oxide-releasing silica nanoparticles10.1021/am402618w ↗
14. Susceptibility of Gram-positive and -negative bacteria to novel nitric oxide-releasing nanoparticle technology10.4161/viru.2.3.16161 ↗
15. Sustained release nitric oxide releasing nanoparticles: Characterization of a novel delivery platform based on nitrite containing hydrogel/glass composites10.1016/j.niox.2008.04.003 ↗
16. Antimicrobial and healing efficacy of sustained release nitric oxide nanoparticles against staphylococcus aureus skin infection10.1038/jid.2009.95 ↗
17. Potential application of gaseous nitric oxide as a topical antimicrobial agent10.1016/j.niox.2005.08.003 ↗
18. Involvement of nitric oxide in biofilm dispersal of Pseudomonas aeruginosa10.1128/JB.00779-06 ↗
19. Nitric oxide release: part II. Therapeutic applications10.1039/c2cs15273h ↗
20. Surface modification of PLGA nanoparticles to deliver nitric oxide to inhibit Escherichia coli growth10.1016/j.apsusc.2016.12.217 ↗
21. Synthesis of nitric oxide-releasing silica nanoparticles10.1021/ja0674338 ↗
22. Chemistry of the diazeniumdiolates. 3. Photoreactivity10.1021/ja002898y ↗
23. A stent for co-delivering paclitaxel and nitric oxide from abluminal and luminal surfaces: Preparation, surface characterization, and in vitro drug release studies10.1016/j.apsusc.2013.04.072 ↗
24. Reducing Staphylococcus aureus biofilm formation on stainless steel 316L using functionalized self-assembled monolayers10.1016/j.msec.2013.01.023 ↗
25. Surface immobilization of active vancomycin on calcium aluminum oxide10.1016/j.msec.2010.12.003 ↗
26. Co-immobilization of active antibiotics and cell adhesion peptides on calcium based biomaterials10.1016/j.msec.2014.04.017 ↗
27. Binding of vancomycin group antibiotics to d-alanine and d-lactate presenting self-assembled monolayers10.1016/S0968-0896(00)00184-X ↗
28. The antibacterial activity of Magainin I immobilized onto mixed thiols Self-Assembled Monolayers10.1016/j.biomaterials.2009.03.025 ↗
29. Reducing Escherichia coli growth on a composite biomaterial by a surface immobilized antimicrobial peptide10.1016/j.msec.2016.04.021 ↗
30. Formation and structure of self-assembled monolayers10.1021/cr9502357 ↗
31. Understanding organic film behavior on alloy and metal oxides10.1021/la904120s ↗
32. Kruszewski, K.M. (2012). Inhibiting Bacterial Biofilm Formation on Stainless Steel 316L Using Self-Assembled Monolayers, Duquense University.
33. Formation of self-assembled monolayers of alkylphosphonic acid on the native oxide surface of SS316L10.1021/la060636p ↗
34. (2009). NHS and Sulfo-NHS, Thermo Scientific.
35. NO+, NO., and NO− donation by S-Nitrosothiols: Implications for regulation of physiological functions by S-Nitrosylation and acceleration of disulfide formation10.1006/abbi.1995.1231 ↗
36. Degradable nitric oxide-releasing biomaterials via post-polymerization functionalization of cross-linked polyesters10.1021/bm1006823 ↗
37. Gelatin-siloxane nanoparticles to deliver nitric oxide for vascular cell regulation: Synthesis, cytocompatibility, and cellular responses10.1002/jbm.a.35239 ↗
38. Mechnism of nitric oxide release from S-Nitrosothiols10.1074/jbc.271.31.18596 ↗
39. (2014). Nitrate/Nitrite Colorimetric Assay Kit, Cayman Chemical Company.
40. The structural basis for the action of the antibiotics tetracycline, pactamycin, and hygromycin B on the 30S ribosomal subunit10.1016/S0092-8674(00)00216-6 ↗
41. Reduction of 3T3 fibroblast adhesion on SS316L by methyl-terminated SAMs10.1016/j.msec.2010.06.013 ↗
42. Functionalization of nickel oxide using alkylphosphonic acid self-assembled monolayers10.1016/j.tsf.2008.06.055 ↗
43. Self-assembly of organic acid molecules on the metal oxide surface of a cupronickel alloy10.1016/j.tsf.2012.02.064 ↗
44. Perfluorocarbon thin films and polymer brushes on stainless steel 316 L for the control of interfacial properties10.1021/la200792t ↗
45. Controlled nitric oxide delivery platform based on S-Nitrosothiol conjugated interpolymer complexes for diabetic wound healing10.1021/mp900237f ↗
46. S-Nitrosated biodegradable polymer for biomedical applications: Synthesis, characterization and impact of thiol structure on the physiochemical properties10.1039/c2jm16554f ↗
47. Biodegradable S-Nitrosothiol tethered multiblock polymer for nitric oxide delivery10.1039/c1jm10315f ↗
48. Semiquantitative study of the EDC/NHS activation of acid terminal groups at modified porous silicon surfaces10.1021/la902220a ↗
49. Synthesis of nitric oxide-releasing gold nanoparticles10.1021/ja052027u ↗
50. Water-soluble nitric oxide-releasing gold nanoparticles10.1021/la0633841 ↗
51. Characterization of nitric oxide-releasing microparticles for the mucosal delivery10.1002/jbm.a.32434 ↗
52. Polymers incorporating nitric oxide releasing/generating substances for improved biocompatibility of blood-contacting medical devices10.1016/j.biomaterials.2004.06.006 ↗
53. Formation and stability of a nitric oxide donor: S-nitroso-N-acetylpenicillamine10.1021/jp0531107 ↗
54. Endogenous nitric oxide protects bacteria against a wide spectrum of antibiotics10.1126/science.1175439 ↗