journal article·2022-10-17Open access

Benzyldimethyldodecyl Ammonium Chloride Doped Dental Adhesive: Impact on Core’s Properties, Biosafety, and Antibacterial/Bonding Performance after Aging

Lamia Sami Mokeem, Abdulrahman A. Balhaddad, Isadora Martini Garcia, Fabrício Mezzomo Collares, Mary Anne S. Melo

Abstract

Current dental adhesives lack antibacterial properties. This study aimed to explore the effect of incorporating benzyldimethyldodecyl ammonium chloride (BDMDAC) on the degree of conversion, contact angle, ultimate tensile strength (UTS), microtensile bond strength (µTBS), cytotoxicity, antibacterial and bonding performance after artificial aging. A dental adhesive was doped with BDMDAC in the concentration range of 1–5 wt.%. For antibacterial assays, the BDMDAC compound was subject to planktonic cells of Streptococcus mutans. Then, after incorporation into the dental adhesive, an S. mutans biofilm model was used to grow 48 h-mature biofilms. The biofilms grown over the formulated materials were assessed by colony-forming unit (CFU) counting assay and fluorescence microscopy staining. In addition, the cytotoxicity was evaluated. Samples were subjected to 10,000 thermal cycles for aging and evaluated by UTS, µTBS, and CFU. Incorporating BDMDAC did not increase the cytotoxicity or change the physical properties when the mass fraction of the BDMDAC was 1–5 wt.%. The UTS of BDMDAC-doped adhesives was not impaired immediately or over time. A significant bacterial reduction was obtained for the mass fraction of the BDMDAC greater than 3 wt.%. However, the BDMDAC-doped adhesives did not offer an antibacterial effect after artificial aging. The overall results indicate that the BDMDAC strategy has the potential to control of microbial growth of cariogenic planktonic cells and biofilms. However, other new technological approaches are needed to overcome the deleterious effect of BDMDAC release over time such as those based on the principle of drug delivery systems whereby the BDMDAC is transported on microparticles or core shells, providing tangible benefits to oral health over time.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Dental materials and restorations · Endodontics and Root Canal Treatments · Oral microbiology and periodontitis research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Ph.D. Program in Biomedical Sciences, University of Maryland School of Dentistry, Baltimore, MD 21201, USA

Department of Restorative Dental Sciences, College of Dentistry, Imam Abdulrahman Bin Faisal University, P.O. Box 1982, Dammam 31441, Saudi Arabia

Dental Materials Department, School of Dentistry, Federal University of Rio Grande do Sul, Porto Alegre 90035-004, RS, Brazil

Operative Dentistry Division, General Dentistry Department, University of Maryland School of Dentistry, Baltimore, MD 21201, USA

References (50)

Show source-provided references
1. Dental Caries: A Dynamic Disease Process10.1111/j.1834-7819.2008.00064.x ↗
2. Terminology of Dental Caries and Dental Caries Management: Consensus Report of a Workshop Organized by ORCA and Cariology Research Group of IADR10.1159/000503309 ↗
3. Models of Caries Formation around Dental Composite Restorations10.1177/0022034516683395 ↗
4. Antibacterial Activity and Bonding Characteristics of an Adhesive Resin Containing Antibacterial Monomer MDPB10.1016/S0109-5641(02)00060-X ↗
5. Spałek, J., Ociepa, P., Deptuła, P., Piktel, E., Daniluk, T., Król, G., Góźdź, S., Bucki, R., and Okła, S. (2022). Biocompatible Materials in Otorhinolaryngology and Their Antibacterial Properties. Int. J. Mol. Sci., 23.10.3390/ijms23052575 ↗
6. de Melo, M.A.S. (2020). Designing Bioactive Polymeric Materials for Restorative Dentistry, CRC Press.10.1201/9780429113284 ↗
7. Khurshid, Z., Zafar, M., Qasim, S., Shahab, S., Naseem, M., and AbuReqaiba, A. (2015). Advances in Nanotechnology for Restorative Dentistry. Materials, 8.10.3390/ma8020717 ↗
8. Zinc-Based Particle with Ionic Liquid as a Hybrid Filler for Dental Adhesive Resin10.1016/j.jdent.2020.103477 ↗
9. Multifunctional Dental Composite with Piezoelectric Nanofillers for Combined Antibacterial and Mineralization Effects10.1021/acsami.1c06331 ↗
10. Collares, F.M., Garcia, I.M., Klein, M., Parolo, C.F., Sánchez, F.A.L., Takimi, A., Bergmann, C.P., Samuel, S.M.W., Melo, M.A., and Leitune, V.C. (2020). Exploring Needle-Like Zinc Oxide Nanostructures for Improving Dental Resin Sealers: Design and Evaluation of Antibacterial, Physical and Chemical Properties. Polymers, 12.10.3390/polym12040789 ↗
11. Antibacterial Effect and Bond Strength of a Modified Dental Adhesive Containing the Peptide Nisin10.1016/j.peptides.2017.10.003 ↗
12. Toward Dental Caries: Exploring Nanoparticle-Based Platforms and Calcium Phosphate Compounds for Dental Restorative Materials
13. Antibacterial Response of Oral Microcosm Biofilm to Nano-Zinc Oxide in Adhesive Resin
14. Mitwalli, H., Alsahafi, R., Balhaddad, A.A., Weir, M.D., Xu, H.H.K., and Melo, M.A.S. (2020). Emerging Contact-Killing Antibacterial Strategies for Developing Anti-Biofilm Dental Polymeric Restorative Materials. Bioengineering, 7.10.3390/bioengineering7030083 ↗
15. Synthesis and Anti-Microbial Activities of Choline-like Quaternary Ammonium Chlorides10.1016/j.ejmech.2003.09.004 ↗
16. Choline-Derivative-Based Ionic Liquids10.1002/chem.200700285 ↗
17. Pseudomonas Fluorescens Tolerance to Benzyldimethyldodecyl Ammonium Chloride: Altered Phenotype and Cross-Resistance10.1016/j.jgar.2018.07.004 ↗
18. Quantum Dots as Nonagglomerated Nanofillers for Adhesive Resins10.1177/0022034516656838 ↗
19. Magnetic Motion of Superparamagnetic Iron Oxide Nanoparticles- Loaded Dental Adhesives: Physicochemical/Biological Properties, and Dentin Bonding Performance Studied through the Tooth Pulpal Pressure Model10.1016/j.actbio.2021.07.031 ↗
20. Discrepancies in Degree of Conversion Measurements by FTIR
21. Titanium Dioxide Nanotubes with Triazine-Methacrylate Monomer to Improve Physicochemical and Biological Properties of Adhesives10.1016/j.dental.2020.11.004 ↗
22. Effect of Nanolayering of Calcium Salts of Phosphoric Acid Ester Monomers on the Durability of Resin-Dentin Bonds10.1016/j.actbio.2016.04.034 ↗
23. Estimation of the Surface Free Energy of Polymer10.1002/app.1969.070130815 ↗
24. Contact Angle of Dentin Bonding Agents on the Dentin Surface10.4012/dmj.15.39 ↗
25. Assessment of Wettability and Contact Angle of Bonding Agent with Enamel Surface Etched by Five Commercially Available Etchants: An In Vitro Study10.1155/2021/9457553 ↗
26. Ibrahim, M.S., Ibrahim, A.S., Balhaddad, A.A., Weir, M.D., Lin, N.J., Tay, F.R., Oates, T.W., Xu, H.H.K., and Melo, M.A.S. (2019). A Novel Dental Sealant Containing Dimethylaminohexadecyl Methacrylate Suppresses the Cariogenic Pathogenicity of Streptococcus Mutans Biofilms. Int. J. Mol. Sci., 20.10.3390/ijms20143491 ↗
27. Effects of Quaternary Ammonium Chain Length on the Antibacterial and Remineralizing Effects of a Calcium Phosphate Nanocomposite10.1038/ijos.2015.33 ↗
28. Development of a Multifunctional Adhesive System for Prevention of Root Caries and Secondary Caries10.1016/j.dental.2015.06.010 ↗
29. Effect of a Novel Quaternary Ammonium Silane Cavity Disinfectant on Durability of Resin-Dentine Bond10.1016/j.jdent.2017.03.003 ↗
30. One-Year Water-Ageing of Calcium Phosphate Composite Containing Nano-Silver and Quaternary Ammonium to Inhibit Biofilms10.1038/ijos.2016.13 ↗
31. Antibacterial Activity and Cytotoxicity of Two Novel Cross-Linking Antibacterial Monomers on Oral Pathogens10.1016/j.archoralbio.2010.10.011 ↗
32. Comparison of Quaternary Ammonium-Containing with Nano-Silver-Containing Adhesive in Antibacterial Properties and Cytotoxicity10.1016/j.dental.2013.01.012 ↗
33. Association for the Advancement of Medical Instrumentation (2007). Biological Evaluation of Medical Devices, Part 12: Sample Preparation and Reference Materials, AAMI. ANSI/AAMI/ISO 10993-12: 2007.
34. Resin-Composite Cytotoxicity Varies with Shade and Irradiance10.1016/j.dental.2011.12.007 ↗
35. Academy of Dental Materials Guidance on In Vitro Testing of Dental Composite Bonding Effectiveness to Dentin/Enamel Using Micro-Tensile Bond Strength (ΜTBS) Approach10.1016/j.dental.2016.11.015 ↗
36. ISO/TS 11405: Dental materials-testing of adhesion to tooth structure. ISO/TS 11405: Dental materials-testing of adhesion to tooth structure, 200310.1007/s10266-012-0073-2 ↗
37. Thermal Cycling Procedures for Laboratory Testing of Dental Restorations10.1016/S0300-5712(98)00037-2 ↗
38. Novel Riboflavin/VE-TPGS Modified Universal Dentine Adhesive with Superior Dentine Bond Strength and Self-Crosslinking Potential10.1016/j.dental.2019.11.003 ↗
39. New Antimicrobial and Collagen Crosslinking Formulated Dentin Adhesive with Improved Bond Durability10.1016/j.jmbbm.2020.103927 ↗
40. Optimizing the Concentration of Quaternary Ammonium Dimethacrylate Monomer in Bis-GMA/TEGDMA Dental Resin System for Antibacterial Activity and Mechanical Properties10.1007/s10856-014-5156-x ↗
41. Effect of a Novel Quaternary Ammonium Methacrylate Polymer (QAMP) on Adhesion and Antibacterial Properties of Dental Adhesives10.3390/ijms15058998 ↗
42. Degree of Conversion and Permeability of Dental Adhesives10.1111/j.1600-0722.2005.00251.x ↗
43. Adaptable Crosslinks in Polymeric Materials: Resolving the Intersection of Thermoplastics and Thermosets10.1021/jacs.9b07922 ↗
44. Analysis of the Degradation of a Model Dental Composite10.1177/154405910808700712 ↗
45. Mechanisms Regulating the Degradation of Dentin Matrices by Endogenous Dentin Proteases and Their Role in Dental Adhesion. A Review
46. Kwaśniewska, D., Chen, Y.-L., and Wieczorek, D. (2020). Biological Activity of Quaternary Ammonium Salts and Their Derivatives. Pathogens, 9.10.3390/pathogens9060459 ↗
47. Balhaddad, A.A., Mokeem, L.S., Weir, M.D., Xu, H., and Melo, M.A.S. (2021). Sustained Antibacterial Effect and Wear Behavior of Quaternary Ammonium Contact-Killing Dental Polymers after One-Year of Hydrolytic Degradation. Appl. Sci., 11.10.3390/app11083718 ↗
48. Anti-Bacterial and Anti-Microbial Aging Effects of Resin-Based Sealant Modified by Quaternary Ammonium Monomers10.1016/j.jdent.2021.103767 ↗
49. Correlation of Clinical Performance with ‘In Vitro Tests’ of Restorative Dental Materials That Use Polymer-Based Matrices10.1016/j.dental.2011.08.594 ↗
50. Mena Silva, P.A., Garcia, I.M., Nunes, J., Visioli, F., Castelo Branco Leitune, V., Melo, M.A., and Collares, F.M. (2020). Myristyltrimethylammonium Bromide (MYTAB) as a Cationic Surface Agent to Inhibit Streptococcus Mutans Grown over Dental Resins: An In Vitro Study. J. Funct. Biomater., 11.10.3390/jfb11010009 ↗