TiNi-Based Material with Shape-Memory Effect for Surgical Treatment of Diseases of Small Intestine in Newborn and Young Children
Source abstract
Abstract
Alloys based on TiNi are widely used in various fields of technology and medicine. In the present work, we report on the preparation of TiNi-alloy-based wire with the shape-memory effect, which was used for compression clips for surgery. The composition and structure of the wire and its martensitic and physical–chemical properties were studied using SEM, TEM, optic microscopy, profilometry, mechanical tests, etc. The TiNi alloy was found to consist of B2 and B19′ and secondary-phase particles of Ti2Ni, TiNi3 and Ti3Ni4. Its matrix was slightly enriched in Ni (50.3 at.% of Ni). A homogeneous grain structure was revealed (an average grain size of 19 ± 0.3 μm) with equal quantities of grain boundaries of special and general types. The surface oxide layer provides improved biocompatibility and promotes the adhesion of protein molecules. Overall, the obtained TiNi wire was concluded to exhibit martensitic, physical and mechanical properties suitable for its use as an implant material. The wire was then used for manufacturing compression clips with the shape-memory effect and applied in surgery. The medical experiment that involved 46 children demonstrated that the use of such clips in children with double-barreled enterostomies permitted improvement in the results of surgical treatment.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Shape Memory Alloy Transformations · Titanium Alloys Microstructure and Properties · Bone Tissue Engineering Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Laboratory of Medical Materials Science, Tomsk State University, 634050 Tomsk, Russia
Institute of Physics, Kazan Federal University, 420008 Kazan, Russia
Department of Pediatric Surgical Diseases, Siberian State Medical University, 634050 Tomsk, Russia
Research Institute of Science and Technology, Tokai University, Hiratsuka 259-1292, Kanagawa, Japan
Funding
Tomsk State University Development Programme · Strategic Academic Leadership Program “Priority 2030”
References (89)
Show source-provided references
1. A review of shape memory alloy research, applications and opportunities10.1016/j.matdes.2013.11.084 ↗
2. Manufacturing and processing of NiTi implants: A review10.1016/j.pmatsci.2011.11.001 ↗
3. The importance of antibacterial surfaces in biomedical applications10.1016/bs.abl.2018.05.001 ↗
4. Medical shape memory alloy applications—The market and its products10.1016/j.msea.2003.10.326 ↗
5. Investigation of corrosion resistance of biomaterials based on titanium and titanium nickelide
6. Medical Uses of Nitinol10.4028/www.scientific.net/MSF.327-328.63 ↗
7. Nitinol for Medical Applications: A Brief Introduction to the Properties and Processing of Nickel Titanium Shape Memory Alloys and their Use in Stents10.1595/205651317X694524 ↗
8. In-vitro mechanical behavior and high cycle fatigue characteristics of NiTi-based shape memory alloy wire10.1016/j.ijfatigue.2021.106226 ↗
9. A review on NiTi alloys for biomedical applications and their biocompatibility
10. Preparation of porous TiNi-Ti alloy by diffusion sintering method and study of its composition, structure and martensitic transformations10.1016/j.jallcom.2021.163559 ↗
11. Kaftaranova, M.I., Hodorenko, V.N., Anikeev, S.G., Artyukhova, N.V., Shabalina, A.V., and Gunter, V.E. (2022). Investigation of the Effect of Copper Addition on Physical and Mechanical Properties of TiNi-Cu Porous Alloy. Metals, 12.10.3390/met12101696 ↗
12. Recent advances in corrosion research of biomedical NiTi shape memory alloy
13. The effect of Cu-doping on the corrosion behavior of NiTi alloy arch wires under simulated clinical conditions10.1088/2053-1591/abdb4e ↗
14. Study of Nickel Segregation at the TiNi-Titanium Oxide Interface10.4028/www.scientific.net/MSF.738-739.269 ↗
15. First-principles investigations of oxygen adsorption at TiNi surface and the TiO2/TiO-TiNi interface10.1016/j.physb.2013.06.025 ↗
16. Deformation behavior of TiO2 films deposited on NiTi shape memory alloy after tensile and water-bath heating tests10.1016/j.surfcoat.2021.127151 ↗
17. Sol–gel derived Ta-containing TiO2 films on surface roughened NiTi alloy10.1007/s12598-013-0208-9 ↗
18. Rudolf, R., Stambolíc, A., and Kocijan, A. (2021). Atomic Layer Deposition of aTiO2 Layer on Nitinol and Its Corrosion Resistance in a Simulated Body Fluid. Metals, 11.10.3390/met11040659 ↗
19. Preparation and properties of titanium oxide film on NiTi alloy by micro-arc oxidation10.1016/j.apsusc.2011.01.047 ↗
20. Residual chlorine in TiO2 films grown at low temperatures by plasma enhanced atomic layer deposition10.1016/j.tsf.2017.03.025 ↗
21. Controlling the grain size of polycrystalline TiO2 films grown by atomic layer deposition10.1016/j.apsusc.2017.04.146 ↗
22. Atomic Layer-Deposited TiO2 Coatings on NiTi Surface10.1007/s11665-018-3136-x ↗
23. One-Step Synthesis of TiO2-Hydroxyapatite Nano-films on NiTi Alloy by Hydrothermal Method10.1016/S1875-5372(16)30106-0 ↗
24. Gunther, V.E., Khodorenko, V.N., and Chekalkin, T.L. (2011). Medical Materials and Shape Memory Implants, NPP «MIC». [1st ed.]. (In Russian).
25. Gunther, V.E., Khodorenko, V.N., and Yasenchuk, Y.F. (2006). Titanium Nickelide: New Generation Medical Material, NPP «MIC». (In Russian).
26. Physical metallurgy of TiNi based shape memory alloys10.1016/j.pmatsci.2004.10.001 ↗
27. Surface modified NiTi smart biomaterials: Surface engineering and biological compatibility10.1016/j.cobme.2022.100429 ↗
28. Structure and surface of TiNi human implants10.1016/S0142-9612(00)00404-X ↗
29. Sparing surgery with the use of TiNi-based endografts in larynx cancer patients10.1002/jso.23779 ↗
30. Customized titanium reconstruction of post-traumatic orbital wall defects: A review of 22 cases10.1016/j.ijom.2011.04.020 ↗
31. Reconstruction of the chest wall using titanium-nickelid for cancer patients
32. Working out and results of application of the method of bronchus stump closure by TiNi implants
33. Application of TiNi Dental Implants with Permeable Porosity in Patients Rehabilitation with Different Adentia Options10.18502/kms.v2i1.799 ↗
34. The evolution of research projects of nickelid titanium devices for creating compressive inter-intestinal anastomoses
35. Problems of biocompatibility of metallic materials
36. Compression anastomoses in gastrointestinal surgery performed with a shape memory alloy device
37. Compression intestinal anastomoses using metals with “shape memory” in experiment
38. Use of titanium nickelide devices in abdominal surgery
39. Ziganshin, R.V. (2000). New technology of compression anastomosis creation in gastrointestinal surgery by superelastic implants with shape memory: Monograph. Sci. Tech. Transl., 174. (In Russian).
40. Application of magnetic-compression intestinal anastomosis in the treatment of children with enterostomies10.18484/2305-0047.2020.1.46 ↗
41. First experience of compression delayed anastomosis during resection of the intestine in peritonitis in children
42. Creation of interintestinal anastomoses using permanent magnets in the complex surgical treatment of children with intestinal stoma
43. Magnetic compression anastomosis for rectal atresia following necrotizing enterocolitis: A case report10.1097/MD.0000000000023613 ↗
44. Application of compression devices from titanium nickelide with shape memory in the treatment of intestinal obstruction in childhood
45. Bilateral enterostomy with compression anastomosis in newborns and infants10.17816/psaic1007 ↗
46. Gulyaev, A.P. (1977). Metal Science, Metallurgy. (In Russian).
47. Baranova, L.V., and Demina, E.L. (1986). Metallographic Etching of Metals and Alloys, Metallurgiya. (In Russian).
48. Bramfitt, B.L., and Benscoter, A.O. (2012). Metallographer’s Guide: Practices and Procedures for Irons and Steel, ASTM International.
49. Classification of surgical complications: A new proposal with evaluation in a cohort of 6336 patients and results of a survey10.1097/01.sla.0000133083.54934.ae ↗
50. Pushin, V.G. (2006). Titanium Nickelide Alloys with Shape Memory Effect: Part. I. Structure, Phase Transformations, and Properties, Ural. Otd. Ross. Akad. Nauk. (In Russian).
51. Effect of dispersed Ti3Ni4 particles on martensitic transformations in titanium nickelide single crystals10.1134/S0031918X08120065 ↗
52. Zhu, L., Trepanier, C., Fino, J., and Pelton, A.R. (2003, January 8–10). Oxidation of nitinol and its effect on corrosion resistance. Proceedings of the ASM Materials & Processes for Medical Device Conference, Anaheim, CA, USA.
53. Rudskoy, A.I., Lunev, V.A., and Shaboldo, O.P. (2011). Drawing: Teaching Medium, Publishing House of Polytechnic University. (In Russian).
54. Surface roughness of implants: A review
55. A critical review of dental implant materials with an emphasis on titanium versus zirconia10.3390/ma8030932 ↗
56. Rausch, M.A., Shokoohi-Tabrizi, H., Wehner, C., Pippenger, B.E., Wagner, R.S., Ulm, C., Moritz, A., Chen, J., and Andrukhov, O. (2021). Impact of implant surface material and microscale roughness on the initial attachment and proliferation of primary human gingival fibroblasts. Biology, 10.10.3390/biology10050356 ↗
57. Evaluation of soft tissue reactions at the interface of titanium limited contact dynamic compression plate implants with different surfacetreatments: An experimental sheep study10.1016/0142-9612(96)81417-7 ↗
58. Application of Titanium Nickelide–Based Alloys in Engineering
59. Powder Titanium Nickelide: Technology and Properties10.1134/S0036029520110087 ↗
60. The mechanisms and the applications of antibacterial polymers in surface modification on medical devices10.3389/fbioe.2020.00910 ↗
61. Dimensional effect during martensite transformation
62. Influence of the state of grain boundaries on superplastic flow
63. Influence of grain boundary structure on the development of superplastic deformation mechanisms of aluminum alloys
64. Our thoughts are ours, their ends none of our own: Are there ways to synthesize materials beyond the limitations of today?10.1016/j.actamat.2008.08.028 ↗
65. Failure of metals III: Fracture and fatigue of nanostructured metallic materials10.1016/j.actamat.2015.07.049 ↗
66. Grain size effect on the R phase transformation of nanocrystalline NiTi shape memory alloys10.1007/s10853-014-8167-6 ↗
67. Effect of grain size on the martensitic transformation in NiTi alloy10.1007/BF00362129 ↗
68. Effect of B2 austenite grain size and aging time on microstructure and transformation behavior of thermomechanically treated titanium nickelide10.1016/j.jallcom.2018.06.102 ↗
69. The mechanisms of stress-induced transformation in ultimately fine-grained titanium nickelide, and critical grain size for this transformation
70. The electronic structure of grain boundaries in metals and alloys10.1016/j.commatsci.2004.11.018 ↗
71. Gorelik, S.S., Dobatkin, S.V., and Kaputkina, L.M. (2005). Recrystallization of Metals and Alloys, MISiS. (In Russian).
72. Mechanical response of mesoporous amorphous NiTi alloy to external deformations10.1016/j.ijsolstr.2021.111047 ↗
73. Effect of dynamically recrystallized austenite on the martensite start temperature of martensitic transformation10.1016/j.msea.2006.02.069 ↗
74. Grain Boundary Design of Bulk Nanomaterials for Advanced Properties10.4028/www.scientific.net/DF.5.43 ↗
75. Grain boundary engineering: Historical perspective and future prospects10.1007/s10853-011-5393-z ↗
76. Special boundaries in real polycrystals. Surface
77. Structural phase transformations in metallic grain boundaries10.1038/ncomms2919 ↗
78. Tilt grain boundary energy in metals and alloys with HCC lattice
79. R-phase transformation in NiTi alloys10.1179/1743284714Y.0000000590 ↗
80. Structural features of nanostructured equiatomic TiNi alloy under multiple martensitic transformations
81. Dimensional effect during martensite transformation
82. Lobodyuk, V.A., and Estrin, E.I. (2009). Martensitic Transformations, Fizmatlit. (In Russian).
83. Martensite stabilisation effect in Ni-rich NiTi shape memory alloy with different structure and martensitic transformations10.1016/j.sna.2020.111911 ↗
84. Martensite stabilization effect in the Ni50Ti50 alloy after preliminary deformation by cooling under constant stress10.1007/s40830-020-00282-2 ↗
85. Influence of chemical composition of NiTi alloy on the martensite stabilization effect10.1016/j.jallcom.2019.01.326 ↗
86. Damage of the martensite interfaces as the mechanism of the martensite stabilization effect in the NiTi shape memory alloys10.1016/j.jallcom.2022.166189 ↗
87. Martensitic stabilization and defects induced by deformation in TiNi shape memory alloys10.1007/s12613-011-0401-5 ↗
88. Deformation mechanism of martensite in Ti-rich Ti-Ni shape memory alloy thin films10.1016/j.actamat.2005.10.046 ↗
89. Laws of stress and strain changes under loading and unloading conditions in titanium nickelide-based alloys