journal article·2016-04-14Open access

Evaluating the Surface Topography of Pyrolytic Carbon Finger Prostheses through Measurement of Various Roughness Parameters

Andrew Naylor, Sumedh Talwalkar, Ian Trail, Thomas Joyce

Abstract

The articulating surfaces of four different sizes of unused pyrolytic carbon proximal interphalangeal prostheses (PIP) were evaluated though measuring several topographical parameters using a white light interferometer: average roughness (Sa); root mean-square roughness (Sq); skewness (Ssk); and kurtosis (Sku). The radii of the articulating surfaces were measured using a coordinate measuring machine, and were found to be: 2.5, 3.3, 4.2 and 4.7 mm for proximal, and 4.0, 5.1, 5.6 and 6.3 mm for medial components. ANOVA was used to assess the relationship between the component radii and each roughness parameter. Sa, Sq and Ssk correlated negatively with radius (p = 0.001, 0.001, 0.023), whilst Sku correlated positively with radius (p = 0.03). Ergo, the surfaces with the largest radii possessed the better topographical characteristics: low roughness, negative skewness, high kurtosis. Conversely, the surfaces with the smallest radii had poorer topographical characteristics.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advanced machining processes and optimization · Advanced Surface Polishing Techniques · Dental materials and restorations

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

School of Mechanical and Systems Engineering, Newcastle University, Newcastle upon Tyne, England NE1 7RU, UK

Upper Limb Research Unit, Wrightington Hospital, Wigan, England WN6 9EP, UK

References (22)

Show source-provided references
1. Proximal interphalangeal joint replacement in patients with arthritis of the hand: A meta-analysis10.1302/0301-620X.94B10.29035 ↗
2. Outcomes of proximal interphalangeal joint pyrocarbon implants10.1016/j.jhsa.2009.08.010 ↗
3. Outcomes of pyrolytic carbon arthroplasty for the proximal interphalangeal joint10.1097/PRS.0b013e3181a2059b ↗
4. Problematic bone fixation with pyrocarbon implants in proximal interphalangeal joint replacement: Short-term results10.1016/J.JHSB.2006.08.004 ↗
5. Pyrolytic carbon arthroplasty for posttraumatic arthritis of the proximal interphalangeal joint10.1016/j.jhsa.2006.07.017 ↗
6. An analysis of explanted pyrolytic carbon prostheses10.1177/1753193412469134 ↗
7. In vitro wear testing of the pyrocarbon proximal interphalangeal joint replacement: Five million cycles of flexion and extension10.1177/0954411915581410 ↗
8. In vitro wear testing of a contemporary design of reverse shoulder prosthesis10.1016/j.jbiomech.2015.07.022 ↗
9. Topographical analysis of the femoral components of ex vivo total knee replacements10.1007/s10856-012-4815-z ↗
10. In vitro wear testing of a CoCr-UHMWPE finger prosthesis with hydroxyapatite coated cocr stems10.3390/lubricants3020244 ↗
11. Tribological analysis of failed resurfacing hip prostheses and comparison with clinical data10.1243/13506501JET484 ↗
12. Wear testing of a DJOA finger prosthesis in vitro10.1007/s10856-010-4010-z ↗
13. The effect of surface topography of retrieved femoral heads on the wear of uhmwpe sockets10.1016/S1350-4533(97)00032-5 ↗
14. Ultra-high molecular weight polyethylene wear debris generated in vivo and in laboratory tests; the influence of counterface roughness10.1243/PIME_PROC_1996_210_385_02 ↗
15. Roughness parameters10.1016/S0924-0136(02)00060-2 ↗
16. Correlation between standard roughness parameters skewness and kurtosis and tribological behaviour of contact surfaces10.1016/j.triboint.2011.11.008 ↗
17. (2011). BS EN ISO 7206–2: Implants for Surgery—Partial and Total Hip Joint Prostheses. Part 2: Articulating Surfaces Made of Metallic, Ceramic and Plastics Materials, British Standards Institute.
18. (2003). Surface Measurement Parameters for Wyko® Optical Profilers: An505-5-0403, Veeco Instruments.
19. Naylor, A., Trail, I.A., Talwalkar, S.C., and Joyce, T.J. (2015, January 15–16). Evaluating the Articulating Surface Roughness of New Pyrocarbon Proximal Interphalangeal Prostheses. Proceedings of the British Society for Surgery of the Hand: Autumn Scientific Meeting, London, UK.
20. Calculation of stribeck curves for line contacts10.1016/S0301-679X(00)00024-4 ↗
21. State of the art in laser surface texturing10.1115/1.1828070 ↗
22. (2012). BS EN ISO 25178–2: Geometric Product Specification, Surface Texture (Areal). Part 2: Terms, Definitions and Surface Texture Parameters, British Standards Institute.