Engineering 3D Printed Scaffolds with Tunable Hydroxyapatite
Source abstract
Abstract
Orthopedic and craniofacial surgical procedures require the reconstruction of bone defects caused by trauma, diseases, and tumor resection. Successful bone restoration entails the development and use of bone grafts with structural, functional, and biological features similar to native tissues. Herein, we developed three-dimensional (3D) printed fine-tuned hydroxyapatite (HA) biomimetic bone structures, which can be applied as grafts, by using calcium phosphate cement (CPC) bioink, which is composed of tetracalcium phosphate (TTCP), dicalcium phosphate anhydrous (DCPA), and a liquid [Polyvinyl butyral (PVB) dissolved in ethanol (EtOH)]. The ink was ejected through a high-resolution syringe nozzle (210 µm) at room temperature into three different concentrations (0.01, 0.1, and 0.5) mol/L of the aqueous sodium phosphate dibasic (Na2HPO4) bath that serves as a hardening accelerator for HA formation. Raman spectrometer, X-ray diffraction (XRD), and scanning electron microscopy (SEM) demonstrated the real-time HA formation in (0.01, 0.1, and 0.5) mol/L Na2HPO4 baths. Under those conditions, HA was formed at different amounts, which tuned the scaffolds’ mechanical properties, porosity, and osteoclast activity. Overall, this method may pave the way to engineer 3D bone scaffolds with controlled HA composition and pre-defined properties, which will enhance graft-host integration in various anatomic locations.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Bone Tissue Engineering Materials · Additive Manufacturing and 3D Printing Technologies · 3D Printing in Biomedical Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
American Dental Association Science & Research Institute, Gaithersburg, MD 20899, USA
Materials Science and Engineering Division, National Institute of Standards and Technology, Gaithersburg, MD 20899, USA
Funding
National Institute of Arthritis and Musculoskeletal and Skin Diseases
References (55)
Show source-provided references
1. Biofabrication of 3D printed hydroxyapatite composite scaffolds for bone regeneration10.1088/1748-605X/abcf03 ↗
2. Bone Microvasculature: Stimulus for Tissue Function and Regeneration10.1089/ten.teb.2020.0154 ↗
3. 3D-Printing Technologies for Craniofacial Rehabilitation, Reconstruction, and Regeneration10.1007/s10439-016-1668-5 ↗
4. Overview of safety issues concerning the preparation and processing of soft-tissue allografts10.1016/j.arthro.2006.10.009 ↗
5. Grassi, F.R., Grassi, R., Vivarelli, L., Dallari, D., Govoni, M., Nardi, G.M., Kalemaj, Z., and Ballini, A. (2020). Design Techniques to Optimize the Scaffold Performance: Freeze-dried Bone Custom-made Allografts for Maxillary Alveolar Horizontal Ridge Augmentation. Materials, 13.10.20944/preprints202002.0028.v1 ↗
6. The fusion of craniofacial reconstruction and microsurgery: A functional and aesthetic approach10.1097/PRS.0000000000000564 ↗
7. The evolution of critical concepts in aesthetic craniofacial microsurgical reconstruction10.1097/PRS.0b013e3182589e12 ↗
8. Govoni, M., Vivarelli, L., Mazzotta, A., Stagni, C., Maso, A., and Dallari, D. (2021). Commercial Bone Grafts Claimed as an Alternative to Autografts: Current Trends for Clinical Applications in Orthopaedics. Materials, 14.10.3390/ma14123290 ↗
9. Mechanical and in vivo performance of hydroxyapatite implants with controlled architectures10.1016/S0142-9612(01)00243-5 ↗
10. A novel method for biomaterial scaffold internal architecture design to match bone elastic properties with desired porosity10.1016/j.jbiomech.2003.09.029 ↗
11. 3D printing of ceramic-based scaffolds for bone tissue engineering: An overview10.1039/C8TB00677F ↗
12. 3D printing of bone tissue engineering scaffolds
13. Bone grafts and their substitutes10.1302/0301-620X.98B.36350 ↗
14. Developmental origin, functional maintenance and genetic rescue of osteoclasts10.1038/s41586-019-1105-7 ↗
15. Engineering porous scaffolds using gas-based techniques10.1016/j.copbio.2011.04.005 ↗
16. Formation of porous HPCL/LPCL/HA scaffolds with supercritical CO2 gas foaming method10.1016/j.jmbbm.2016.12.014 ↗
17. Fabrication of HA/PHBV composite scaffolds through the emulsion freezing/freeze-drying process and characterisation of the scaffolds10.1007/s10856-007-3214-3 ↗
18. PHBV/PLLA-based composite scaffolds fabricated using an emulsion freezing/freeze-drying technique for bone tissue engineering: Surface modification and in vitro biological evaluation10.1088/1758-5082/4/1/015003 ↗
19. A biodegradable porous composite scaffold of PGA/beta-TCP for bone tissue engineering10.1016/j.bone.2009.09.031 ↗
20. Synthesis and characterization of porous beta-tricalcium phosphate blocks10.1016/j.biomaterials.2005.03.026 ↗
21. Basic Principles of Emulsion Templating and Its Use as an Emerging Manufacturing Method of Tissue Engineering Scaffolds10.3389/fbioe.2020.00875 ↗
22. Wang, X., Ao, Q., Tian, X., Fan, J., Wei, Y., Hou, W., Tong, H., and Bai, S. (2016). 3D Bioprinting Technologies for Hard Tissue and Organ Engineering. Materials, 9.10.3390/ma9100802 ↗
23. 3D-printed bioceramic scaffolds: From bone tissue engineering to tumor therapy10.1016/j.actbio.2018.08.026 ↗
24. Multi-Dimensional Printing for Bone Tissue Engineering10.1002/adhm.202001986 ↗
25. Systematic characterization of 3D-printed PCL/beta-TCP scaffolds for biomedical devices and bone tissue engineering: Influence of composition and porosity10.1557/jmr.2018.112 ↗
26. Fabrication and Evaluation of 3D Printed Poly(l-lactide) Scaffold Functionalized with Quercetin-Polydopamine for Bone Tissue Engineering10.1021/acsbiomaterials.9b00254 ↗
27. Engineering anatomically shaped vascularized bone grafts with hASCs and 3D-printed PCL scaffolds
28. Integrating 3D-printed PHBV/Calcium sulfate hemihydrate scaffold and chitosan hydrogel for enhanced osteogenic property10.1016/j.carbpol.2018.08.117 ↗
29. Preparation and properties of polyvinyl alcohol (PVA) and hydroxylapatite (HA) hydrogels for cartilage tissue engineering10.14715/cmb/2017.63.5.7 ↗
30. Preparation and characterization of PLA/PCL/HA composite scaffolds using indirect 3D printing for bone tissue engineering10.1016/j.msec.2019.109960 ↗
31. The rheo-Raman microscope: Simultaneous chemical, conformational, mechanical, and microstructural measures of soft materials10.1063/1.4963746 ↗
32. NIH Image to ImageJ: 25 years of image analysis10.1038/nmeth.2089 ↗
33. Reaction of calcium phosphate cements with different amounts of tetracalcium phosphate and dicalcium phosphate anhydrous10.1002/(SICI)1097-4636(19990915)46:4<504::AID-JBM8>3.0.CO;2-H ↗
34. The generation of osteoclasts from RAW 264.7 precursors in defined, serum-free conditions10.1007/s00774-008-0018-6 ↗
35. RANKL-mediated osteoclast formation from murine RAW 264.7 cells10.1385/1-59259-366-6:153 ↗
36. Lampiasi, N., Russo, R., Kireev, I., Strelkova, O., Zhironkina, O., and Zito, F. (2021). Osteoclasts Differentiation from Murine RAW 264.7 Cells Stimulated by RANKL: Timing and Behavior. Biology, 10.10.3390/biology10020117 ↗
37. Application of 3D Printing Technology in Bone Tissue Engineering: A Review10.2174/18755704MTExsNDcy2 ↗
38. Comparison of 3D-Printed Poly-varepsilon-Caprolactone Scaffolds Functionalized with Tricalcium Phosphate, Hydroxyapatite, Bio-Oss, or Decellularized Bone Matrix10.1089/ten.tea.2016.0418 ↗
39. 3D printing for preoperative planning and surgical training: A review10.1007/s10544-018-0301-9 ↗
40. Hench, L.L. (2013). An Introduction to Bioceramics, World Scientific.10.1142/p884 ↗
41. Three dimensional biphasic calcium phosphate nanocomposites for load bearing bioactive bone grafts10.1016/j.msec.2015.10.027 ↗
42. Premixed rapid-setting calcium phosphate composites for bone repair10.1016/j.biomaterials.2005.01.015 ↗
43. High early strength calcium phosphate bone cement: Effects of dicalcium phosphate dihydrate and absorbable fibers10.1002/jbm.a.30497 ↗
44. Synergistic reinforcement of in situ hardening calcium phosphate composite scaffold for bone tissue engineering10.1016/S0142-9612(03)00608-2 ↗
45. Histopathologic reaction of a calcium phosphate cement for alveolar ridge augmentation10.1002/jbm.10010 ↗
46. Next generation calcium phosphate-based biomaterials10.4012/dmj.28.1 ↗
47. Properties of Calcium Phosphate Cements With Different Tetracalcium Phosphate and Dicalcium Phosphate Anhydrous Molar Ratios10.6028/jres.113.025 ↗
48. Polymeric calcium phosphate cements: Analysis of reaction products and properties10.1016/0109-5641(93)90104-X ↗
49. Calcium phosphate cements for bone engineering and their biological properties10.1038/boneres.2017.56 ↗
50. Alimperti, S., Yoontae, K., Lee, E.-J., Chow, L.C., and Takagi, S. (2021). Three-Dimensional Printed Hydroxyapatite Composite Scaffolds for Bone Regeneration, Precursor Compositions and Methods of Printing. (Application No. 16/894,128), U.S. Patent.10.1088/1748-605X/abcf03 ↗
51. Bone Mineral Is More Heterogeneously Distributed in the Femoral Heads of Osteoporotic and Diabetic Patients: A Pilot Study10.1002/jbm4.10253 ↗
52. Bioresorbability, porosity and mechanical strength of bone substitutes: What is optimal for bone regeneration?10.1016/j.injury.2011.06.008 ↗
53. Porosity of 3D biomaterial scaffolds and osteogenesis10.1016/j.biomaterials.2005.02.002 ↗
54. Bone repair in the twenty-first century: Biology, chemistry or engineering?10.1098/rsta.2004.1466 ↗
55. Mechanical properties on cranial bone10.1016/0021-9290(70)90059-X ↗