journal article·2022-01-13Open access

3D Printing of Hierarchically Porous Lattice Structures Based on Åkermanite Glass Microspheres and Reactive Silicone Binder

Arish Dasan, Jozef Kraxner, Luca Grigolato, Gianpaolo Savio, Hamada Elsayed, Dušan Galusek, Enrico Bernardo

Abstract

The present study illustrates the manufacturing method of hierarchically porous 3D scaffolds based on åkermanite as a promising bioceramic for stereolithography. The macroporosity was designed by implementing 3D models corresponding to different lattice structures (cubic, diamond, Kelvin, and Kagome). To obtain micro-scale porosity, flame synthesized glass microbeads with 10 wt% of silicone resins were utilized to fabricate green scaffolds, later converted into targeted bioceramic phase by firing at 1100 °C in air. No chemical reaction between the glass microspheres, crystallizing into åkermanite, and silica deriving from silicone oxidation was observed upon heat treatment. Silica acted as a binder between the adjacent microspheres, enhancing the creation of microporosity, as documented by XRD, and SEM coupled with EDX analysis. The formation of ‘spongy’ struts was confirmed by infiltration with Rhodamine B solution. The compressive strength of the sintered porous scaffolds was up to 0.7 MPa with the porosity of 68–84%.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Bone Tissue Engineering Materials · Additive Manufacturing and 3D Printing Technologies · 3D Printing in Biomedical Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Centre for Functional and Surface-Functionalized Glass, Alexander Dubček University of Trenčín, 911 50 Trenčín, Slovakia

Department of Industrial Engineering, Università degli Studi di Padova, 35131 Padova, Italy

Department of Civil, Environmental and Architectural Engineering (ICEA), University of Padova, 35131 Padova, Italy

Refractories, Ceramics and Building Materials Department, National Research Centre, El Buhouth Str., Cairo 12622, Egypt

Joint Glass Centre of the IIC SAS, TnUAD, and FChFT STU, FunGlass, Alexander Dubček University of Trenčín, 911 50 Trenčín, Slovakia

Funding

European Commission Horizon 2020

References (23)

Show source-provided references
1. Development of hierarchical porous bioceramic scaffolds with controlled micro/nano surface topography for accelerating bone regeneration10.1016/j.msec.2021.112437 ↗
2. Three-Dimensional Scaffolds for Tissue Engineering Applications: Role of Porosity and Pore Size10.1089/ten.teb.2012.0437 ↗
3. Engineered biomaterials for in situ tissue regeneration10.1038/s41578-020-0209-x ↗
4. Boccaccio, A., Uva, A.E., Fiorentino, M., Mori, G., and Monno, G. (2016). Geometry Design Optimization of Functionally Graded Scaffolds for Bone Tissue Engineering: A Mechanobiological Approach. PLoS ONE, 11.10.1371/journal.pone.0146935 ↗
5. Rational design of bioceramic scaffolds with tuning pore geometry by stereolithography: Microstructure evaluation and mechanical evolution10.1016/j.jeurceramsoc.2020.10.002 ↗
6. Multiscale Porosity in Compressible Cryogenically 3D Printed Gels for Bone Tissue Engineering10.1021/acsami.9b05460 ↗
7. Engineering of silicone-based mixtures for the digital light processing of Åkermanite scaffolds10.1016/j.jeurceramsoc.2019.11.087 ↗
8. Recent advances on akermanite calcium-silicate ceramic for biomedical applications10.1111/ijac.13814 ↗
9. Akermanite bioceramics promote osteogenesis, angiogenesis and suppress osteoclastogenesis for osteoporotic bone regeneration10.1038/srep22005 ↗
10. Bioceramic akermanite enhanced vascularization and osteogenic differentiation of human induced pluripotent stem cells in 3D scaffolds in vitro and vivo10.1039/C9RA02026H ↗
11. Regulation of immune response by bioactive ions released from silicate bioceramics for bone regeneration10.1016/j.actbio.2017.08.044 ↗
12. Biocompatibility and bioactivity of porous polymer-derived Ca-Mg silicate ceramics10.1016/j.actbio.2016.12.043 ↗
13. Åkermanite glass microspheres: Preparation and perspectives of sinter-crystallization10.1111/ijag.16115 ↗
14. Glass powders and reactive silicone binder: Interactions and application to additive manufacturing of bioactive glass-ceramic scaffolds10.1016/j.ceramint.2019.04.070 ↗
15. Glass powders and reactive silicone binder: Application to digital light processing of bioactive glass-ceramic scaffolds10.1016/j.ceramint.2020.06.323 ↗
16. A novel and economical route for synthesizing akermanite (Ca2MgSi2O7) nano-bioceramic10.1016/j.msec.2016.11.021 ↗
17. Manufacturing of SiO2-Coated b-TCP Structures by 3D Printing using a Preceramic Polymer as Printing Binder and Silica Source
18. Direct ink writing of silica-bonded calcite scaffolds from preceramic polymers and fillers10.1088/1758-5090/aa6c37 ↗
19. Direct ink writing of silica-carbon-calcite composite scaffolds from a silicone resin and fillers10.1016/j.jeurceramsoc.2018.07.049 ↗
20. Gibson, L.J., and Ashby, M.F. (1997). Cellular Solids: Structure and Properties, Cambridge University Press. [2nd ed.].10.1017/CBO9781139878326 ↗
21. Höland, W., and Beall, G.H. (2012). Glass-Ceramic Technology, John Wiley & Sons.10.1002/9781118265987 ↗
22. Ansys Granta Selector, Granta EduPack 2021 R1. https://www.ansys.com/products/materials/granta-selector/.
23. Biosilicate®–gelatine bone scaffolds by the foam replica technique: Development and characterization10.1088/1468-6996/14/4/045008 ↗