journal article·2019-11-22Open access

Simulated Performance of a Xenohybrid Bone Graft (SmartBone®) in the Treatment of Acetabular Prosthetic Reconstruction

Carlo Francesco Grottoli, Alberto Cingolani, Fabio Zambon, Riccardo Ferracini, Tomaso Villa, Giuseppe Perale

Abstract

Total hip arthroplasty (THA) is a surgical procedure for the replacement of hip joints with artificial prostheses. Several approaches are currently employed in the treatment of this kind of defect. Overall, the most common method involves using a quite invasive metallic support (a Burch–Schneider ring). Moreover, valid alternatives and less invasive techniques still need to be supported by novel material development. In this work, we evaluated the performance of SmartBone®, a xenohybrid bone graft composed of a bovine bone matrix reinforced with biodegradable polymers and collagen, as an effective support in acetabular prosthesis reconstruction. Specifically, the material’s mechanical properties were experimentally determined (E = ~1.25 GPa, Ef = ~0.34 GPa, and Et = ~0.49 GPa) and used for simulation of the hip joint system with a SmartBone® insert. Moreover, a comparison with a similar case treated with a Burch–Schneider ring was also conducted. It was found that it is possible to perform THA revision surgeries without the insertion of an invasive metal support and it can be nicely combined with SmartBone®’s osteointegration characteristics. The material can withstand the loads independently (σmax = ~12 MPa) or be supported by a thinner titanium plate in contact with the bone in the worst cases. This way, improved bone regeneration can be achieved.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Orthopaedic implants and arthroplasty · Hip disorders and treatments · Total Knee Arthroplasty Outcomes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Industrie Biomediche Insubri SA, 6805 Mezzovico-Vira, Switzerland

Politecnico di Milano, Laboratory of Biological Structure Mechanics, Department of Chemistry, Materials and Chemical Engineering “G. Natta”, 20133 Milan, Italy

Department of Surgical Sciences and Integrated Diagnostics, University of Genova, Largo R. Benzi 10, 16132 Genova, Italy

IRCCS Ospedale Policlinico San Martino, Largo R. Benzi 10, 16132 Genova, Italy

Ludwig Boltzmann Institute for Experimental and Clinical Traumatology, Donaueschingenstrasse 13, 1200 Vienna, Austria

References (59)

Show source-provided references
1. Projections of primary and revision hip and knee arthroplasty in the United States from 2005 to 203010.2106/00004623-200704000-00012 ↗
2. Outpatient Surgery as a Means of Cost Reduction in Total Hip Arthroplasty: A Case-Control Study10.1007/s11420-014-9401-0 ↗
3. Reconstruction of Acetabular Posterior Wall Fractures10.4055/cios.2011.3.2.114 ↗
4. Chondral Lesion of the Hip10.1016/j.csm.2016.02.005 ↗
5. Hip morphology influences the pattern of damage to the acetabular cartilage10.1302/0301-620X.87B7.15203 ↗
6. Unravelling the hip pistol grip/cam deformity: Origins to joint degeneration10.1002/jor.24137 ↗
7. Tsertsvadze, A., Grove, A., Freeman, K., Court, R., Johnson, S., Connock, M., Clarke, A., and Sutcliffe, P. (2014). Total hip replacement for the treatment of end stage arthritis of the hip: A systematic review and meta-analysis. PLoS ONE, 9.10.1371/journal.pone.0099804 ↗
8. Percutaneous column fixation and total hip arthroplasty for the treatment of acute acetabular fracture in the elderly10.1016/j.arth.2013.08.009 ↗
9. Die behandlung von acetabulumfrakturen bei geriatrischen patienten mittels modifizierter kabelcerclage und primärer hüfttotalprothese. Erste ergebnisse10.1007/s00113-004-0827-6 ↗
10. Open reduction internal fixation and primary total hip arthroplasty of selected acetabular fractures10.1097/BOT.0b013e3181923fb8 ↗
11. The combined hip procedure: Open reduction internal fixation combined with total hip arthroplasty for the management of acetabular fractures in the elderly10.1097/BOT.0b013e3181b1d22a ↗
12. Acute total hip arthroplasty in acetabular fractures in the elderly using the Octopus System: Mid term to long term follow-up10.1016/j.arth.2012.12.003 ↗
13. Total hip arthroplasty with bulk femoral head autograft for acetabular reconstruction in developmental dysplasia of the hip10.2106/00004623-200304000-00005 ↗
14. Surgical treatment of acetabular fractures in the elderly: A systematic review of the results10.1302/2058-5241.2.160036 ↗
15. Fixation of the cemented acetabular component in hip arthroplasty10.1080/03008820510040685 ↗
16. High hip center in revision arthroplasty10.1016/0883-5403(94)90097-3 ↗
17. Risk Factors for Total Hip Arthroplasty Aseptic Revision10.1016/j.arth.2014.01.023 ↗
18. Revision total hip arthoplasty: Factors associated with re-revision surgery10.2106/JBJS.N.00073 ↗
19. Maximizing function and outcomes in acetabular reconstruction: Segmental bony defects and pelvic discontinuity
20. Fate of bone grafting for acetabular defects in total hip replacement10.4103/0019-5413.152462 ↗
21. Revision total hip arthroplasty—Salvage procedures using bone allografts in Japan10.1016/j.jos.2017.01.023 ↗
22. Ahumada, M., Jacques, E., Calderon, C., and Martinez-gomez, F. (2018). porosity in biomaterials: A key factor in the development of applied materials in biomedicine. Handbook of Ecomaterials, Springer International.10.1007/978-3-319-48281-1_162-1 ↗
23. Merola, M., and Affatato, S. (2019). Materials for hip prostheses: A review of wear and loading considerations. Materials, 12.10.3390/ma12030495 ↗
24. Advances in porous biomaterials for dental and orthopaedic applications10.3390/ma3052947 ↗
25. Fabrication of polymeric biomaterials: A strategy for tissue engineering and medical devices10.1039/C5TB01370D ↗
26. A review of biomaterials in bone defect healing, remaining shortcomings and future opportunities for bone tissue engineering10.1302/2046-3758.73.BJR-2017-0270.R1 ↗
27. Control of Pore Structure in Polymeric Monoliths Prepared from Colloidal Dispersions10.1002/mame.201700417 ↗
28. Fabrication aspects of porous biomaterials in orthopedic applications: A Review10.1021/acsbiomaterials.7b00615 ↗
29. New method of synthesis and in vitro studies of a porous biomaterial10.1016/j.msec.2015.12.022 ↗
30. Resorbable biomaterials as bone graft substitutes10.1016/S1369-7021(10)70014-6 ↗
31. Zhang, K., Wang, S., Zhou, C., Cheng, L., Gao, X., Xie, X., Sun, J., Wang, H., Weir, M.D., and Reynolds, M.A. (2018). Advanced smart biomaterials and constructs for hard tissue engineering and regeneration. Bone Res., 6.10.1038/s41413-018-0032-9 ↗
32. Bone substitutes: A review of their characteristics, clinical use, and perspectives for large bone defects management10.1177/2041731418776819 ↗
33. Improving bovine bone mechanical characteristics for the development of xenohybrid bone grafts10.2174/1389201020666181129115839 ↗
34. Bioactive and osteoinductive bone graft substitutes: Definitions, facts and myths10.1016/j.injury.2011.06.010 ↗
35. Bone grafts: Which is the ideal biomaterial?10.1111/jcpe.13058 ↗
36. Bone replacement materials and techniques used for achieving vertical alveolar bone augmentation10.3390/ma8062953 ↗
37. Bone tissue engineering: Recent advances and challenges10.1615/CritRevBiomedEng.v40.i5.10 ↗
38. Bovine bone matrix/poly(L-lactic-co-ε-caprolactone)/gelatin hybrid scaffold (SmartBone®) for maxillary sinus augmentation: A histologic study on bone regeneration10.1016/j.ijpharm.2016.10.036 ↗
39. New bone formation after transcrestal sinus floor elevation was influenced by sinus cavity dimensions: A prospective histologic and histomorphometric study10.1111/clr.13144 ↗
40. Minimum abutment height to eliminate bone loss: Influence of implant neck design and platform switching10.11607/jomi.5604 ↗
41. Grottoli, C., Ferracini, R., Compagno, M., Tombolesi, A., Rampado, O., Pilone, L., Bistolfi, A., Borre, A., Cingolani, A., and Perale, G. (2019). A radiological approach to evaluate bone graft integration in reconstructive surgeries. Appl. Sci., 9.10.3390/app9071469 ↗
42. Evaluation of custom made xenogenic bone grafts in mandibular alveolar ridge augmentation versus particulate bone graft with titanium mesh10.21608/omx.2018.19566 ↗
43. Concentrated adipose tissue infusion for the treatment of knee osteoarthritis: Clinical and histological observations10.1007/s00264-018-4192-4 ↗
44. Piana, R., Boffano, M., Pellegrino, P., Ratto, N., Rossi, L., Perale, G., Division, O.O., Hospital, C.T.O., and Citta, A.O.U. (2018). Treating femoral chondrosarcoma with high mechanical performances bio-hybrid bone graft: A case report. Materials Science and Engineering-Darmstadt 26th–28th September 2018, DGM.
45. Ferracini, R., Bistolfi, A., Garibaldi, R., Furfaro, V., Battista, A., and Perale, G. (2019). Composite xenohybrid bovine bone-derived scaffold as bone substitute for the treatment of tibial plateau fractures. Appl. Sci., 9.10.3390/app9132675 ↗
46. Three-dimensional craniofacial bone reconstraction with smartbone on demand10.1097/SCS.0000000000005277 ↗
47. Compressive mechanical properties of demineralized and deproteinized cancellous bone10.1016/j.jmbbm.2011.02.006 ↗
48. Biological materials: Functional adaptations and bioinspired designs10.1016/j.pmatsci.2012.03.001 ↗
49. Cingolani, A., Casalini, T., Caimi, S., Klaue, A., Sponchioni, M., Rossi, F., and Perale, G. (2018). A methodologic approach for the selection of bio-resorbable polymers in the development of medical devices: The case of poly(l-lactide-co-ε-caprolactone). Polymers, 10.10.20944/preprints201807.0022.v1 ↗
50. Failure of structural acetabular allografts in cementless revision hip arthroplasty10.1302/0301-620X.76B3.8175845 ↗
51. Adipose-derived stromal vascular fraction/xenohybrid bone scaffold: An alternative source for bone regeneration10.1155/2018/4126379 ↗
52. Development and validation of a three-dimensional finite element model of the pelvic bone10.1115/1.2794181 ↗
53. Load Transfer Across the Pelvic10.1016/0021-9290(94)00125-N ↗
54. (2017, December 01). Available online: https://medicine.uiowa.edu/mri/facility-resources/images/visible-human-project-ct-datasets.
55. Use of computed tomography for assessing bone mineral density10.3171/2014.5.FOCUS1483 ↗
56. Evaluation of orthogonal mechanical properties and density of human trabecular bone from the major metaphyseal regions with materials testing and computed tomography10.1002/jor.1100090507 ↗
57. Shu, Y., Wen-Chuan, L., Chang-Hung, C., Cheng-Kung, H., Chan, C.K., and Chang, T.K. (2015). The elastic modulus and Poisson’s ratio of cortical bone, cancellous bone, cartilage, meniscus and four ligaments. PLoS ONE Dataset.
58. The natural alpha angle of the femoral headneck junction10.1302/0301-620X.100B5.BJJ-2017-0249.R3 ↗
59. Dostal, W.F., and Andrews, J.G. (1981). A three-dimensional biomechanical model of hip musculature. J. Biomech., 14.10.1016/0021-9290(81)90036-1 ↗