journal article·2018-05-22Open access

Mechanical Behavior Optimization of Chitosan Extracted from Shrimp Shells as a Sustainable Material for Shopping Bags

Giacomo D’Angelo, Amal Elhussieny, Marwa Faisal, I. S. Fahim, Nicola M. Everitt

Abstract

The use of biodegradable materials for shopping bag production, and other products made from plastics, has recently been an object of intense research—with the aim of reducing the environmental burdens given by conventional materials. Chitosan is a potential material because of its biocompatibility, degradability, and non-toxicity. It is a semi-natural biopolymeric material produced by the deacetylation of chitin, which is the second most abundant natural biopolymer (after cellulose). Chitin is found in the exoskeleton of insects, marine crustaceans, and the cell walls of certain fungi and algae. The raw materials most abundantly available are the shells of crab, shrimp, and prawn. Hence, in this study chitosan was selected as one of the main components of biodegradable materials used for shopping bag production. Firstly, chitin was extracted from shrimp shell waste and then converted to chitosan. The chitosan was next ground to a powder. Although, currently, polyethylene bags are prepared by blown extrusion, in this preliminary research the chitosan powder was dissolved in a solvent and the films were cast. Composite films with several fillers were used as a reinforcement at different dosages to optimize mechanical properties, which have been assessed using tensile tests. These results were compared with those of conventional polyethylene bags used in Egypt. Overall, the chitosan films were found to have a lower ductility but appeared to be strong enough to fulfill shopping bag functions. The addition of fillers, such as chitin whiskers and rice straw, enhanced the mechanical properties of chitosan films, while the addition of chitin worsened overall mechanical behavior.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Nanocomposite Films for Food Packaging · Microplastics and Plastic Pollution · biodegradable polymer synthesis and properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Bioengineering Research Group, Faculty of Engineering, University of Nottingham, University Park, Nottingham NG7 2RD, UK

Centre of Nano-science and technology (CNT), The Nile University, Nile Avenue, Giza 116453, Egypt

Department of Industrial Engineering, School of Engineering, The Nile University, Nile Avenue, Giza 116453, Egypt

Department of Mechanical Materials and Manufacturing Engineering, University of Nottingham, Nottingham NG7 2RD, UK

References (15)

Show source-provided references
1. Plastic waste inputs from land into the ocean10.1126/science.1260352 ↗
2. Abou Hagra, A. (2017). Together for A Sustainable Future, UNIDO. Federation of Egyptian Industries. Chamber of trade; for technical affairs.
3. Mechanical and Barrier Properties of Edible Chitosan Films as Affected by Composition and Storage10.1111/j.1365-2621.1996.tb10909.x ↗
4. Preparation and Characterization of Agar/Clay Nanocomposite Films: The Effect of Clay Type10.1111/j.1750-3841.2011.02049.x ↗
5. Mechanical, thermal, structural and barrier properties of crab shell chitosan/graphene oxide composite films10.1016/j.foodhyd.2017.05.013 ↗
6. Bioactive chitosan/ellagic acid films with UV-light protection for active food packaging10.1016/j.foodhyd.2017.06.037 ↗
7. Bakker, M., and Eckroth, D. (1986). The Wiley Encyclopedia of Packaging Technology, John Wiley & Sons.
8. Elhussieny, A., Faisal, M., D’Angelo, G., Samy, I., and Everitt, N.M. (2017, January 7–10). Experimental investigation for degradation: Chitosan and nano chitosan films with natural fillers. Proceedings of the 4th International Conference on Advanced Science (ICAS4), Hurghada, Egypt.
9. Review of recent research into cellulosic whiskers, their properties and their application in nanocomposite field10.1021/bm0493685 ↗
10. Renewable resource-based green composites from recycled cellulose fiber and poly(3-hydroxybutyrate-co-3-hydroxyvalerate) bioplastic10.1021/bm050897y ↗
11. Faisal, M., Elhussieny, A., Ali, K.A., Samy, I., and Everitt, N.M. (2017, January 10–13). Extraction of degradable biopolymeric materials from shrimp shell wastes by two different Methods. Proceedings of the 13th International Conference on Materials Chemistry (MC13), Liverpool, UK.
12. International Organization for Standardization (1996). Plastics—Determination of Tensile Properties Part 3: Test Conditions for Films and Sheets, International Organization for Standardization. BS EN ISO 527-3.
13. International Organization for Standardization (1997). Plastics—Determination of Tensile Properties Part 4: Test Conditions for Isotropic and Orthotropic Fibre-Reinforced Plastic Composites, International Organization for Standardization. BS EN ISO 527-4.
14. BSI Standards (2012). Plastics—Determination of Tensile Properties Part 1: General Principles, BSI Standards. BS EN ISO 527-1.
15. BSI Standards (2012). Plastics—Determination of Tensile Properties Part 2: Test Conditions for Moulding and Extrusion Plastics, BSI Standards. BS EN ISO 527-2.