journal article·2015-11-26Open access

An Assessment of Cell Culture Plate Surface Chemistry for in Vitro Studies of Tissue Engineering Scaffolds

Alexander Röder, Elena García-Gareta, Christina Theodoropoulos, Nikola Ristovski, Keith Blackwood, Maria Woodruff

Abstract

The use of biopolymers as a three dimensional (3D) support structure for cell growth is a leading tissue engineering approach in regenerative medicine. Achieving consistent cell seeding and uniform cell distribution throughout 3D scaffold culture in vitro is an ongoing challenge. Traditionally, 3D scaffolds are cultured within tissue culture plates to enable reproducible cell seeding and ease of culture media change. In this study, we compared two different well-plates with different surface properties to assess whether seeding efficiencies and cell growth on 3D scaffolds were affected. Cell attachment and growth of murine calvarial osteoblast (MC3T3-E1) cells within a melt-electrospun poly-ε-caprolactone scaffold were assessed when cultured in either “low-adhesive” non-treated or corona discharged-treated well-plates. Increased cell adhesion was observed on the scaffold placed in the surface treated culture plates compared to the scaffold in the non-treated plates 24 h after seeding, although it was not significant. However, higher cell metabolic activity was observed on the bases of all well-plates than on the scaffold, except for day 21, well metabolic activity was higher in the scaffold contained in non-treated plate than the base. These results indicate that there is no advantage in using non-treated plates to improve initial cell seeding in 3D polymeric tissue engineering scaffolds, however non-treated plates may provide an improved metabolic environment for long-term studies.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Bone Tissue Engineering Materials · 3D Printing in Biomedical Research · Electrospun Nanofibers in Biomedical Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Institute of Health & Biomedical Innovation, Queensland University of Technology (QUT), Brisbane, Queensland, 4059, Australia

RAFT Institute of Plastic Surgery, Mount Vernon Hospital, Northwood HA6 2RN, UK

Funding

Australian Research Council Linkage Project · The Restoration of Appearance and Function Trust

References (21)

Show source-provided references
1. Tissue engineering10.1126/science.8493529 ↗
2. Biomedical applications of polymer-composite materials: A review10.1016/S0266-3538(00)00241-4 ↗
3. The return of a forgotten polymer—Polycaprolactone in the 21st century10.1016/j.progpolymsci.2010.04.002 ↗
4. Repair of calvarial defects with customized tissue-engineered bone grafts I. Evaluation of osteogenesis in a three-dimensional culture system10.1089/10763270360697021 ↗
5. Electrospun-modified nanofibrous scaffolds for the mineralization of osteoblast cells10.1002/jbm.a.31538 ↗
6. Reichert, J.C., Cipitria, A., Epari, D.R., Saifzadeh, S., Krishnakanth, P., Berner, A., Woodruff, M.A., Schell, H., Mehta, M., and Schuetz, M.A. (2012). A tissue engineering solution for segmental defect regeneration in load-bearing long bones. Sci. Transl. Med., 4.10.1126/scitranslmed.3003720 ↗
7. A humanized tissue-engineered in vivo model to dissect interactions between human prostate cancer cells and human bone10.1007/s10585-014-9638-5 ↗
8. Design, fabrication and characterization of PCL electrospun scaffolds—A review10.1039/c0jm04502k ↗
9. Ristovski, N., Bock, N., Liao, S., Powell, S.K., Ren, J., Kirby, G.T.S., Blackwood, K., and Woodruff, M.A. (2015). Improved fabrication of melt electrospun tissue engineering scaffolds using direct writing and advanced electric field control. Biointerphases, 10.10.1116/1.4914380 ↗
10. Oscillating perfusion of cell suspensions through three-dimensional scaffolds enhances cell seeding efficiency and uniformity10.1002/bit.10759 ↗
11. Engineering three-dimensional bone tissue in vitro using biodegradable scaffolds: Investigating initial cell-seeding density and culture period10.1002/1097-4636(20000905)51:3<376::AID-JBM11>3.0.CO;2-G ↗
12. Optimization of cell seeding efficiencies on a three-dimensional gelatin scaffold for bone tissue engineering
13. Altering bacteriological plastic petri dishes for tissue culture use
14. Surface morphology of polyethylene after treatment in a corona discharge10.1002/app.1971.070150606 ↗
15. Effects of scaffold architecture on mechanical characteristics and osteoblast response to static and perfusion bioreactor cultures10.1002/bit.25200 ↗
16. Flow perfusion culture of marrow stromal cells seeded on porous biphasic calcium phosphate ceramics10.1007/s10439-005-5536-y ↗
17. Mesenchymal stem cell ingrowth and differentiation on coralline hydroxyapatite scaffolds10.1016/j.biomaterials.2006.10.003 ↗
18. Stem cell engineered bone with calcium-phosphate coated porous titanium scaffold or silicon hydroxyapatite granules for revision total joint arthroplasty10.1007/s10856-014-5170-z ↗
19. Surface modification of PCL-TCP scaffolds improve interfacial mechanical interlock and enhance early bone formation: An in vitro and in vivo characterization10.1002/jbm.a.32366 ↗
20. Melt-electrospun polycaprolactone strontium-substituted bioactive glass scaffolds for bone regeneration10.1002/jbm.a.34985 ↗
21. Fluorometric assay of DNA in cartilage explants using hoechst 3325810.1016/0003-2697(88)90532-5 ↗