journal article·2022-01-07Open access

Surface Functionalization of Poly(l-lactide-co-glycolide) Membranes with RGD-Grafted Poly(2-oxazoline) for Periodontal Tissue Engineering

Anna M. Tryba, Małgorzata Krok-Borkowicz, Michał Kula, Natalia Piergies, Mateusz Marzec, Erik Wegener, Justyna Frączyk, Rainer Jordan, Beata Kolesińska, Dieter Scharnweber, Czesława Paluszkiewicz, Elżbieta Pamuła

Abstract

Bone tissue defects resulting from periodontal disease are often treated using guided tissue regeneration (GTR). The barrier membranes utilized here should prevent soft tissue infiltration into the bony defect and simultaneously support bone regeneration. In this study, we designed a degradable poly(l-lactide-co-glycolide) (PLGA) membrane that was surface-modified with cell adhesive arginine-glycine-aspartic acid (RGD) motifs. For a novel method of membrane manufacture, the RGD motifs were coupled with the non-ionic amphiphilic polymer poly(2-oxazoline) (POx). The RGD-containing membranes were then prepared by solvent casting of PLGA, POx coupled with RGD (POx_RGD), and poly(ethylene glycol) (PEG) solution in methylene chloride (DCM), followed by DCM evaporation and PEG leaching. Successful coupling of RGD to POx was confirmed spectroscopically by Raman, Fourier transform infrared in attenuated reflection mode (FTIR-ATR), and X-ray photoelectron (XPS) spectroscopy, while successful immobilization of POx_RGD on the membrane surface was confirmed by XPS and FTIR-ATR. The resulting membranes had an asymmetric microstructure, as shown by scanning electron microscopy (SEM), where the glass-cured surface was more porous and had a higher surface area then the air-cured surface. The higher porosity should support bone tissue regeneration, while the air-cured side is more suited to preventing soft tissue infiltration. The behavior of osteoblast-like cells on PLGA membranes modified with POx_RGD was compared to cell behavior on PLGA foil, non-modified PLGA membranes, or PLGA membranes modified only with POx. For this, MG-63 cells were cultured for 4, 24, and 96 h on the membranes and analyzed by metabolic activity tests, live/dead staining, and fluorescent staining of actin fibers. The results showed bone cell adhesion, proliferation, and viability to be the highest on membranes modified with POx_RGD, making them possible candidates for GTR applications in periodontology and in bone tissue engineering.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Bone Tissue Engineering Materials · Electrospun Nanofibers in Biomedical Applications · Graphene and Nanomaterials Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Biomaterials and Composites, Faculty of Materials Science and Ceramics, AGH University of Science and Technology, Al. Mickiewicza 30, 30-059 Kraków, Poland

Institute of Nuclear Physics, Polish Academy of Sciences, ul. Radzikowskiego 152, 31-342 Kraków, Poland

Academic Centre for Materials and Nanotechnology, AGH University of Science and Technology, Al. Mickiewicza 30, 30-059 Kraków, Poland

Faculty of Chemistry and Food Chemistry, Technische Universität Dresden, Mommsenstr, 401069 Dresden, Germany

Faculty of Chemistry, Institute of Organic Chemistry, Łódź University of Technology, ul. Żeromskiego 116, 90-924 Łódź, Poland

Max Bergmann Center of Biomaterials, Technische Universität Dresden, Budapester Str. 27, 01069 Dresden, Germany

Funding

Ministry of Education and Science, Poland

References (57)

Show source-provided references
1. The role of inflammation and genetics in periodontal disease10.1111/prd.12297 ↗
2. Fabrication, in vitro and in vivo studies of bilayer composite membrane for periodontal guided tissue regeneration10.1177/0885328218814986 ↗
3. The regenerative potential of the periodontal ligament. An experimental study in the monkey10.1111/j.1600-051X.1982.tb02065.x ↗
4. Porous poly(l-lactide) membranes for guided tissue regeneration and controlled drug delivery: Membrane fabrication and characterization10.1016/S0168-3659(96)01494-0 ↗
5. Pinnau, I., and Freeman, B.D. (1999). Formation and modification of polymeric membranes: Overview. ACS Symp. Ser., 1–22.10.1021/bk-2000-0744.ch001 ↗
6. Mousavi, S., Zarei, M., Hashemi, S., Ramakrishna, S., Chiang, W.-H., Lai, C., Gholami, A., Omidifar, N., and Shokripour, M. (2020). Asymmetric membranes: A potential scaffold for wound healing applications. Symmetry, 12.10.3390/sym12071100 ↗
7. Construction and characterization of antibacterial PLGA/wool keratin/ornidazole composite membranes for periodontal guided tissue regeneration10.1177/0885328220901396 ↗
8. Treatment of intrabony defects after impacted mandibular third molar removal with bioabsorbable and non-resorbable membranes10.1902/jop.2011.100466 ↗
9. Membranes for Periodontal Regeneration
10. Risk of prion disease transmission through bovine-derived bone substitutes: A systematic review10.1111/j.1708-8208.2011.00407.x ↗
11. GTR membranes: The barriers for periodontal regeneration
12. Poly(l-lactide-co-glycolide) microporous membranes for medical applications produced with the uUse of polyethylene glycol as a pore former10.1002/app.36697 ↗
13. Pamuła, E., Błażewicz, S., Krok, M., Kościelniak, D., and Dobrzyński, P. (2011). Sposób wytwarzania resorbowalnej membrany do sterowanej regeneracji tkanek [Method for manufacturing resorbable membrane for guided tissue regeneration]. (PL 391519 A1), Patent, pp. 4–5.
14. Abalymov, A., Parakhonskiy, B., and Skirtach, A.G. (2020). Polymer- and hybrid-based biomaterials for interstitial, connective, vascular, nerve, visceral and musculoskeletal tissue engineering. Polymers, 12.10.3390/polym12030620 ↗
15. Collagen density gradient on three-dimensional printed poly(ε-caprolactone) scaffolds for interface tissue engineering
16. 3D additive-manufactured nanocomposite magnetic scaffolds: Effect of the application mode of a time-dependent magnetic field on hMSCs behavior
17. RGD-functionalization of poly(2-oxazoline)-based networks for enhanced adhesion to cancer cells10.3390/polym6020264 ↗
18. Zhao, J., Santino, F., Giacomini, D., and Gentilucci, L. (2020). Integrin-targeting peptides for the design of functional cell-responsive biomaterials. Biomedicines, 8.10.3390/biomedicines8090307 ↗
19. Advantages of RGD peptides for directing cell association with biomaterials10.1016/j.biomaterials.2011.02.029 ↗
20. Klimek, K., and Ginalska, G.G. (2020). Proteins and peptides as important modifiers of the polymer scaffolds for tissue engineering. Polymer, 12.10.3390/polym12040844 ↗
21. Recent advance in surface modification for regulating cell adhesion and behaviors10.1515/ntrev-2020-0076 ↗
22. Scharnweber, D., Jordan, R., and Pamuła, E. Oberflächenfunktionalisiertes Polymer für biologische Anwendungen und Verfahren zu dessen Herstellung. (Patent DE 102013225772 B4).
23. Doubly amphiphilic poly(2-oxazoline)s as high-capacity delivery systems for hydrophobic drugs10.1016/j.biomaterials.2010.02.057 ↗
24. Raman scattering studies on PEG functionalized hydroxyapatite nanoparticles10.1016/j.saa.2013.07.064 ↗
25. Poly(oxazoline) for the design of amphiphilic silicone coatings10.1016/j.porgcoat.2020.106116 ↗
26. Side chain variations radically alter the diffusion of poly(2-alkyl-2-oxazoline) functionalised nanoparticles through a mucosal barrier10.1039/C6BM00375C ↗
27. Molecular structure analysis and spectroscopic characterization of 5-ethyl-5-phenyl-1,3-diazinane-4,6-dione with experimental (FT-IR and FT-Raman) techniques and quantum chemical calculations10.1016/j.saa.2013.01.048 ↗
28. Self-assembling peptides for biomedical applications: IR and Raman spectroscopies for the study of secondary structure
29. Vibrational spectra and molecular structure of 3-(piperidine-1-yl-methyl)-1,3-benzoxazol-2(3H)-one molecule by density functional theory and Hartree–Fock calculations10.1016/j.molstruc.2009.02.017 ↗
30. Degradation kinetics of poly(lactic-co-glycolic) acid block copolymer cast films in phosphate buffer solution as revealed by infrared and Raman spectroscopies10.1016/j.polymdegradstab.2011.07.011 ↗
31. Raman imaging of PLGA microsphere degradation inside macrophages10.1021/ja0459936 ↗
32. Development of novel cationic chitosan- and anionic alginate–coated poly(d,l-lactide-co-glycolide) nanoparticles for controlled release and light protection of resveratrol10.2147/IJN.S36684 ↗
33. Surface enhanced Raman scattering and quantum-mechanical calculations on self-assembling oligopeptides10.1002/jrs.5359 ↗
34. Highly sensitive SERS analysis of the cyclic Arg-Gly-Asp peptide ligands of cells using nanogap antennas10.1002/jbio.201500327 ↗
35. Raman spectroscopy: Techniques and applications in the life sciences10.1364/AOP.9.000315 ↗
36. Surface functionalization of poly(l-lactide-co-glicolide) membranes with amphiphilic poly(2-oxazoline) for guided tissue regeneration and treatment of bone tissue defects
37. Poly(lactic acid)/poly(ethylene glycol) polymer nanocomposites: Effects of graphene nanoplatelets10.3390/polym6010093 ↗
38. Synthesis and characterization of polyethylene glycol mediated silver nanoparticles by the green method10.3390/ijms13066639 ↗
39. In-vitro cytotoxic activities of poly(2-ethyl-2-oxazoline)-based amphiphilic block copolymers prepared by CuAAC click chemistry10.3144/expresspolymlett.2018.13 ↗
40. Fourier transform infrared spectroscopic analysis of protein secondary structures10.1111/j.1745-7270.2007.00320.x ↗
41. Porphyrin immobilized nanographene oxide for enhanced and targeted photothermal therapy of brain cancer10.1021/acsbiomaterials.6b00290 ↗
42. FTIR study of degradation products of aliphatic polyesters–carbon fibres composites10.1016/S0022-2860(01)00688-3 ↗
43. Synthesis, physico-chemical characteristics and cellular behavior of poly(lactic-co-glycolic acid)/ gelatin nanofibrous scaffolds for engineering soft connective tissues10.5185/amlett.2016.6003 ↗
44. Recent biomedical applications and patents on biodegradable polymer-PLGA
45. High Resolution XPS of Organic Polymers: The Scienta ESCA300 Database10.1021/ed070pA25.5 ↗
46. Genet, M.J., Dupont-Gillain, C.C., and Rouxhet, P.G. (2008). XPS Analysis of biosystems and biomaterials. Med. Appl. Colloids.
47. XPS analysis of bio-organic systems10.1002/sia.3831 ↗
48. Surface characterization, collagen adsorption and cell behaviour on poly(l-lactide-co-glycolide)
49. Exploiting XPS for the identification of sulfides and polysulfides10.1039/C5RA14915K ↗
50. (2021, December 15). NIST X-ray Photoelectron Spectroscopy Database, Available online: https://srdata.nist.gov/xps/.
51. (1985). Auger and photoelectron line energy relationships in aluminium-oxygen and silicon-oxygen compounds. Vacuum, 35, 241.10.1016/0042-207X(85)90575-5 ↗
52. Organic and inorganic contamination on commercial AFM cantilevers10.1021/la990371x ↗
53. Evaluation of a simple correction for the hydrocarbon contamination layer in quantitative surface analysis by XPS10.1016/j.elspec.2005.02.004 ↗
54. Internal Reflection Spectroscopy10.1080/05704928508060428 ↗
55. Wettability versus roughness of engineering surfaces10.1016/j.wear.2010.03.029 ↗
56. Preferential colonization of osteoblasts over co-cultured bacteria on a bifunctional biomaterial surface10.3389/fmicb.2018.02219 ↗
57. Evaluation of bacterial adherence of clinical isolates of Staphylococcus sp. using a competitive model10.1302/2046-3758.65.BJR-2016-0226.R2 ↗