journal article·2018-10-19Open access

Direct-Contact Cytotoxicity Evaluation of CoCrFeNi-Based Multi-Principal Element Alloys

Ryan Newell, Zi Wang, Isabel Arias, Abhishek Mehta, Yongho Sohn, Stephen Florczyk

Abstract

Transition metal multi-principal element alloys (MPEAs) are novel alloys that may offer enhanced surface and mechanical properties compared with commercial metallic alloys. However, their biocompatibility has not been investigated. In this study, three CoCrFeNi-based MPEAs were fabricated, and the in vitro cytotoxicity was evaluated in direct contact with fibroblasts for 168 h. The cell viability and cell number were assessed at 24, 96, and 168 h using LIVE/DEAD assay and alamarBlue assay, respectively. All MPEA sample wells had a high percentage of viable cells at each time point. The two quaternary MPEAs demonstrated a similar cell response to stainless steel control with the alamarBlue assay, while the quinary MPEA with Mn had a lower cell number after 168 h. Fibroblasts cultured with the MPEA samples demonstrated a consistent elongated morphology, while those cultured with the Ni control samples demonstrated changes in cell morphology after 24 h. No significant surface corrosion was observed on the MPEAs or stainless steel samples following the cell culture, while the Ni control samples had extensive corrosion. The cell growth and viability results demonstrate the cytocompatibility of the MPEAs. The biocompatibility of MPEAs should be investigated further to determine if MPEAs may be utilized in orthopedic implants and other biomedical applications.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: High Entropy Alloys Studies · Orthopaedic implants and arthroplasty · Titanium Alloys Microstructure and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Materials Science and Engineering, University of Central Florida, Orlando, FL 32816-2455, USA

Burnett School of Biomedical Sciences, University of Central Florida, Orlando, FL 32827, USA

References (37)

Show source-provided references
1. Gioe, T.J. (2016). American Joint Replacement Registry 2016 Annual Report, American Joint Replacement Registry.
2. Exceptional damage-tolerance of a medium-entropy alloy crconi at cryogenic temperatures10.1038/ncomms10602 ↗
3. Early failure of metal-on-metal bearings in hip resurfacing and large-diameter total hip replacement: A consequence of excess wear10.1302/0301-620X.92B1.22770 ↗
4. Severe cobalt intoxication due to prosthesis wear in repeated total hip arthroplasty10.1016/j.arth.2008.07.017 ↗
5. Metal wear and tissue response in failed titanium alloy total hip replacements10.1302/0301-620X.73B4.2071635 ↗
6. Aseptic loosening in total hip arthroplasty secondary to osteolysis induced by wear debris from titanium-alloy modular femoral heads10.2106/00004623-198971090-00009 ↗
7. Presence of corrosion products and hypersensitivity-associated reactions in periprosthetic tissue after aseptic loosening of total hip replacements with metal bearing surfaces10.1016/j.actbio.2008.07.032 ↗
8. Periprosthetic osteolysis in total hip arthroplasty: The role of particulate wear debris10.2106/00004623-199509000-00022 ↗
9. Early osteolysis following second-generation metal-on-metal hip replacement
10. Huo, M.H., Salvati, E.A., Lieberman, J.R., Betts, F., and Bansal, M. (1992). Metallic debris in femoral endosteolysis in failed cemented total hip arthroplasties. Clin. Orthop. Relat. Res., 157–168.10.1097/00003086-199203000-00019 ↗
11. Willert, H., Brobäck, L., Buchhorn, G., Jensen, P., Köster, G., Lang, I., Ochsner, P., and Schenk, R. (1996). Crevice corrosion of cemented titanium alloy stems in total hip replacements. Clin. Orthop. Relat. Res., 51–75.10.1097/00003086-199612000-00006 ↗
12. Migration of corrosion products from modular hip prostheses. Particle microanalysis and histopathological findings10.2106/00004623-199409000-00009 ↗
13. Trunnionosis in total hip arthroplasty: A review10.1007/s10195-016-0391-1 ↗
14. Determinants of stress shielding
15. Producing and avoiding stress shielding. Laboratory and clinical observations of noncemented total hip arthroplasty10.1097/00003086-199201000-00010 ↗
16. Infection in total hip replacement: Meta-analysis10.1007/s00264-010-1144-z ↗
17. Inflammatory response to orthopedic biomaterials after total hip replacement10.1007/s00776-012-0234-8 ↗
18. A critical review of high entropy alloys and related concepts10.1016/j.actamat.2016.08.081 ↗
19. Ratner, B.D., Hoffman, A.S., Schoen, F.J., and Lemons, J.E. (2004). Biomaterials Science: An Introduction to Materials in Medicine, Academic Press.
20. Gao, M.C., Yeh, J.-W., Liaw, P.K., and Zhang, Y. (2016). High-Entropy Alloys: Fundamentals and Applications, Springer.10.1007/978-3-319-27013-5 ↗
21. Effect of the aluminium content of alxcrfe1.5mnni0.5 high-entropy alloys on the corrosion behaviour in aqueous environments10.1016/j.corsci.2008.04.011 ↗
22. Enhancing pitting corrosion resistance of alxcrfe1.5mnni0.5 high-entropy alloys by anodic treatment in sulfuric acid10.1016/j.tsf.2008.06.014 ↗
23. Microstructure and electrochemical properties of high entropy alloys—A comparison with type-304 stainless steel10.1016/j.corsci.2004.11.008 ↗
24. Microstructure and wear behavior of alxco1.5crfeni1.5tiy high-entropy alloys10.1016/j.actamat.2011.06.041 ↗
25. Adhesive wear behavior of alxcocrcufeni high-entropy alloys as a function of aluminum content10.1016/j.wear.2005.12.008 ↗
26. The use of high-entropy alloys in additive manufacturing10.1016/j.scriptamat.2014.11.037 ↗
27. Comparative study of the microstructures and mechanical properties of direct laser fabricated and arc-melted alxcocrfeni high entropy alloys10.1016/j.msea.2015.02.072 ↗
28. Structure and hydrogen storage properties of a high entropy zrtivcrfeni alloy synthesized using laser engineered net shaping (lens)10.1016/j.ijhydene.2013.05.071 ↗
29. First demonstration of promising selective electron beam melting method for utilizing high-entropy alloys as engineering materials10.1016/j.matlet.2015.06.046 ↗
30. Additive manufacturing of high-entropy alloys by laser processing10.1007/s11837-016-1888-z ↗
31. Fabrication methods of porous metals for use in orthopaedic applications10.1016/j.biomaterials.2005.12.002 ↗
32. Alagarsamy, K., Fortier, A., Mishra, R., and Kumar, N. (July, January 27). In Investigation of thermo-mechanical processing and mechanical properties of cocrfenimn high entropy alloy for peripheral vascular stent application. Proceedings of the ASME 2016 11th International Manufacturing Science and Engineering Conference, Blacksburg, VA, USA.10.1115/MSEC2016-8770 ↗
33. Mechanical properties of high entropy alloy al 0.1 cocrfeni for peripheral vascular stent application10.1007/s13239-016-0286-6 ↗
34. Mechanisms of cytotoxicity of nickel ions based on gene expression profiles10.1016/j.biomaterials.2008.09.011 ↗
35. Cytotoxicity of manganese for mammalian cells in vitro—Comparisons with lead, mercury and cadmium
36. The use of in the x-ray photo-electron spectroscopy analyses of passive layers on stainless steel10.1016/0010-938X(77)90036-1 ↗
37. Ti based biomaterials, the ultimate choice for orthopaedic implants—A review10.1016/j.pmatsci.2008.06.004 ↗