journal article·2012-03-07Open access

Gas-Foamed Scaffold Gradients for Combinatorial Screening in 3D

Kaushik Chatterjee, Alison M. Kraigsley, Durgadas Bolikal, Joachim Kohn, Carl G. Simon

Abstract

Current methods for screening cell-material interactions typically utilize a two-dimensional (2D) culture format where cells are cultured on flat surfaces. However, there is a need for combinatorial and high-throughput screening methods to systematically screen cell-biomaterial interactions in three-dimensional (3D) tissue scaffolds for tissue engineering. Previously, we developed a two-syringe pump approach for making 3D scaffold gradients for use in combinatorial screening of salt-leached scaffolds. Herein, we demonstrate that the two-syringe pump approach can also be used to create scaffold gradients using a gas-foaming approach. Macroporous foams prepared by a gas-foaming technique are commonly used for fabrication of tissue engineering scaffolds due to their high interconnectivity and good mechanical properties. Gas-foamed scaffold gradient libraries were fabricated from two biodegradable tyrosine-derived polycarbonates: poly(desaminotyrosyl-tyrosine ethyl ester carbonate) (pDTEc) and poly(desaminotyrosyl-tyrosine octyl ester carbonate) (pDTOc). The composition of the libraries was assessed with Fourier transform infrared spectroscopy (FTIR) and showed that pDTEc/pDTOc gas-foamed scaffold gradients could be repeatably fabricated. Scanning electron microscopy showed that scaffold morphology was similar between the pDTEc-rich ends and the pDTOc-rich ends of the gradient. These results introduce a method for fabricating gas-foamed polymer scaffold gradients that can be used for combinatorial screening of cell-material interactions in 3D.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: 3D Printing in Biomedical Research · Additive Manufacturing and 3D Printing Technologies · Bone Tissue Engineering Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Polymers Division, National Institute of Standards & Technology, 100 Bureau Drive, Gaithersburg, MD 20899, USA

Department of Materials Engineering, Indian Institute of Science, Bangalore 560012, India

New Jersey Center for Biomaterials, Rutgers University, Piscataway, NJ 08854, USA

References (38)

Show source-provided references
1. Cell interactions with biomaterials gradients and arrays
2. Combinatorial and high-throughput screening of biomaterials10.1002/adma.201001763 ↗
3. Combinatorial characterization of cell interactions with polymer surfaces10.1002/jbm.a.10004 ↗
4. Osteoblast response to dimethacrylate composites varying in composition, conversion and roughness using a combinatorial approach10.1016/j.biomaterials.2009.05.019 ↗
5. A high-throughput assay of cell-surface interactions using topographical and chemical gradients10.1002/adma.200801942 ↗
6. Combinatorial development of biomaterials for clonal growth of human pluripotent stem cells10.1038/nmat2812 ↗
7. An algorithm-based topographical biomaterials library to instruct cell fate10.1073/pnas.1109861108 ↗
8. Complexity in biomaterials for tissue engineering10.1038/nmat2441 ↗
9. The control of human mesenchymal cell differentiation using nanoscale symmetry and disorder10.1038/nmat2013 ↗
10. The determination of stem cell fate by 3D scaffold structures through the control of cell shape10.1016/j.biomaterials.2011.08.054 ↗
11. lumen formation by epithelial-cell lines in response to collagen overlay—A morphogenetic model in culture10.1073/pnas.79.15.4672 ↗
12. Cell culture: Biology’s new dimension10.1038/424870a ↗
13. Capturing complex 3D tissue physiology in vitro10.1038/nrm1858 ↗
14. Combinatorial polymer scaffold libraries for screening cell-biomaterial interactions in 3D10.1002/adma.200702088 ↗
15. The effect of 3D hydrogel scaffold modulus on osteoblast differentiation and mineralization revealed by combinatorial screening10.1016/j.biomaterials.2010.03.024 ↗
16. Fabricating gradient hydrogel scaffolds for 3D cell culture
17. Combinatorial extracellular matrices for human embryonic stem cell differentiation in 3D10.1021/bm100357t ↗
18. Combinatorial screening of osteoblast response to 3D calcium phosphate/poly(epsilon-caprolactone) scaffolds using gradients and arrays10.1016/j.biomaterials.2010.10.043 ↗
19. Fabrication of combinatorial polymer scaffold libraries10.1063/1.2755761 ↗
20. X-ray imaging optimization of 3D tissue engineering scaffolds via combinatorial fabrication methods10.1016/j.biomaterials.2007.12.042 ↗
21. Open pore biodegradable matrices formed with gas foaming10.1002/(SICI)1097-4636(19981205)42:3<396::AID-JBM7>3.0.CO;2-E ↗
22. A novel fabrication method of macroporous biodegradable polymer scaffolds using gas foaming salt as a porogen additive10.1002/(SICI)1097-4636(2000)53:1<1::AID-JBM1>3.0.CO;2-R ↗
23. Engineered bone development from a pre-osteoblast cell line on three-dimensional scaffolds10.1089/10763270050199550 ↗
24. Processing/structure/property relationship of multi-scaled PCL and PCL-HA composite scaffolds prepared via gas foaming and NaCl reverse templating10.1002/bit.23018 ↗
25. Implants: The biodegradable future
26. Osteogenic differentiation of pre-osteoblasts on biomimetic tyrosine-derived polycarbonate scaffolds10.1021/bm200700d ↗
27. Evaluation of a series of tyrosine-derived polycarbonates as degradable biomaterials10.1002/jbm.820280811 ↗
28. Cellular response to phase-separated blends of tyrosine-derived polycarbonates10.1002/jbm.a.30527 ↗
29. Antimicrobial constituents from the rhizomes of Rheum emodi10.1016/S0031-9422(02)00571-X ↗
30. The thermal conversion reaction of sulphonyl substituted poly( para-xylylene): Evidence for the formation of PPV structures10.1016/S0032-3861(02)00414-7 ↗
31. Nanofiber scaffolds with gradations in mineral content for mimicking the tendon-to-bone insertion site10.1021/nl901582f ↗
32. Magnetically induced protein gradients on electrospun nanofibers
33. Fabrication of a model continuously graded co-electrospun mesh for regeneration of the ligament-bone interface10.1016/j.actbio.2011.07.008 ↗
34. Ramalingam, M., Young, M.F., Thomas, V., Sun, L., Chow, L.C., Tison, C.K., Chatterjee, K., Miles, W.C., and Simon Jr., C.G. (2012). Nanofiber scaffold gradients for interfacial tissue engineering. J. Biomat. Appl., in press.10.1177/0885328211423783 ↗
35. Emerging techniques in stratified designs and continuous gradients for tissue engineering of interfaces10.1007/s10439-010-0033-3 ↗
36. Characterization of the structure-function relationship at the ligament-to-bone interface10.1073/pnas.0712150105 ↗
37. Engineering graded tissue interfaces10.1073/pnas.0801988105 ↗
38. Design of a multiphase osteochondral scaffold III: Fabrication of layered scaffolds with continuous interfaces10.1002/jbm.a.32387 ↗