journal article·2015-11-04Open access

Fabrication of Poly-l-lactic Acid/Dicalcium Phosphate Dihydrate Composite Scaffolds with High Mechanical Strength—Implications for Bone Tissue Engineering

Nida Tanataweethum, Wai Liu, W. Goebel, Ding Li, Tien Chu

Abstract

Scaffolds were fabricated from poly-l-lactic acid (PLLA)/dicalcium phosphate dihydrate (DCPD) composite by indirect casting. Sodium citrate and PLLA were used to improve the mechanical properties of the DCPD scaffolds. The resulting PLLA/DCPD composite scaffold had increased diametral tensile strength and fracture energy when compared to DCPD only scaffolds (1.05 vs. 2.70 MPa and 2.53 vs. 12.67 N-mm, respectively). Sodium citrate alone accelerated the degradation rate by 1.5 times independent of PLLA. Cytocompatibility of all samples were evaluated using proliferation and differentiation parameters of dog-bone marrow stromal cells (dog-BMSCs). The results showed that viable dog-BMSCs attached well on both DCPD and PLLA/DCPD composite surfaces. In both DCPD and PLLA/DCPD conditioned medium, dog-BMSCs proliferated well and expressed alkaline phosphatase (ALP) activity indicating cell differentiation. These findings indicate that incorporating both sodium citrate and PLLA could effectively improve mechanical strength and biocompatibility without increasing the degradation time of calcium phosphate cement scaffolds for bone tissue engineering purposes.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Bone Tissue Engineering Materials · biodegradable polymer synthesis and properties · Graphene and Nanomaterials Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Biomedical Engineering, Indiana University-Purdue University Indianapolis, Indianapolis, IN 46202, USA

Department of Biomedical and Applied Sciences, School of dentistry, Indiana University, Indianapolis, IN 46202, USA

Department of Pediatrics, School of Medicine, Indiana University, Indianapolis, IN 46202, USA

References (42)

Show source-provided references
1. A historical review of common bone graft materials in foot and ankle surgery10.1177/1938640013516358 ↗
2. Tomographic follow-up of bone regeneration after bone block harvesting from the mandibular ramus10.1016/j.ijom.2013.08.010 ↗
3. First histological observations on the incorporation of a novel calcium phosphate bone substitute material in human cancellous bone10.1002/1097-4636(2001)58:3<329::AID-JBM1025>3.0.CO;2-9 ↗
4. Beta-tricalcium phosphate release from brushite cement surface10.1002/jbm.a.31381 ↗
5. Bone grafting: Historical and conceptual review, starting with an old manuscript by vittorio putti10.1080/17453670610013376 ↗
6. Porous poly(l-lactic acid)/apatite composites created by biomimetic process10.1002/(SICI)1097-4636(19990615)45:4<285::AID-JBM2>3.0.CO;2-2 ↗
7. Calcium orthophosphates in medicine: From ceramics to calcium phosphate cements10.1016/S0020-1383(00)80022-4 ↗
8. Properties of osteoconductive biomaterials: Calcium phosphates10.1097/00003086-200202000-00009 ↗
9. Porous block hydroxyapatite in orthognathic surgery
10. In vitro degradation, biocompatibility, and in vivo osteogenesis of poly(lactic-co-glycolic acid)/calcium phosphate cement scaffold with unidirectional lamellar pore structure10.1002/jbm.a.34265 ↗
11. Histological evaluation of the bone response to calcium phosphate cement implanted in cortical bone10.1016/S0142-9612(02)00438-6 ↗
12. Effect of bioactive glass particle size on osseous regeneration of cancellous defects10.1002/(SICI)1097-4636(19980915)41:4<527::AID-JBM3>3.0.CO;2-E ↗
13. Evaluation of particulate bioglass in a rabbit radius ostectomy model10.1002/(SICI)1097-4636(199705)35:2<249::AID-JBM12>3.0.CO;2-C ↗
14. Bonding mechanisms at the interface of ceramic prosthetic materials10.1002/jbm.820050611 ↗
15. In vivo behavior of three different injectable hydraulic calcium phosphate cements10.1016/j.biomaterials.2003.08.073 ↗
16. Biocompatibility and resorption of a brushite calcium phosphate cement10.1016/j.biomaterials.2004.11.056 ↗
17. Dicalcium phosphate cements: Brushite and monetite10.1016/j.actbio.2011.08.005 ↗
18. Calcium phosphate cement reinforcement by polymer infiltration and in situ curing: A method for 3D scaffold reinforcement10.1002/jbm.a.32742 ↗
19. Toughening of bio-ceramics scaffolds by polymer coating10.1016/j.jeurceramsoc.2006.10.016 ↗
20. Enhanced mechanical performance and biological evaluation of a PLGA coated β-TCP composite scaffold for load-bearing applications10.1016/j.eurpolymj.2011.05.004 ↗
21. Poly(propylene fumarate) reinforced dicalcium phosphate dihydrate cement composites for bone tissue engineering10.1002/jbm.a.34130 ↗
22. High-strength resorbable brushite bone cement with controlled drug-releasing capabilities10.1016/j.actbio.2008.08.005 ↗
23. Effect of several additives and their admixtures on the physico-chemical properties of a calcium phosphate cement10.1023/A:1008997118576 ↗
24. Advantages of using glycolic acid as a retardant in a brushite forming cement10.1002/jbm.b.30830 ↗
25. Alge, D.L., Santa Cruz, G., Goebel, W.S., and Chu, T.M. (2009). Characterization of dicalcium phosphate dihydrate cements prepared using a novel hydroxyapatite-based formulation. Biomed. Mater., 4.10.1088/1748-6041/4/2/025016 ↗
26. Anahi, P., Aldo, R.B., Claudia, F., Dirk, W.S., and Judith, A.R. (2015). Toughening and functionalization of bioactive ceramic and glass bone scaffolds by biopolymer coatings and infiltration: A review of the last 5 years. Med. Devices, 12.10.1586/17434440.2015.958075 ↗
27. Current trends and future perspectives of bone substitute materials—From space holders to innovative biomaterials10.1016/j.jcms.2012.01.002 ↗
28. Long-term in vitro degradation of pdlla/bioglass bone scaffolds in acellular simulated body fluid10.1016/j.actbio.2010.09.013 ↗
29. Polylactic acid (PLA): Research, development and industrialization10.1002/biot.201000135 ↗
30. Polylactic acid for surgical implants10.1001/archsurg.1966.01330050143023 ↗
31. Self-setting calcium orthophosphate formulations: Cements, concretes, pastes and putties10.5923/j.ijmc.20110101.01 ↗
32. State of the art and future directions of scaffold-based bone engineering from a biomaterials perspective10.1002/term.24 ↗
33. Resorbable dicalcium phosphate bone substitutes prepared by 3D powder printing10.1002/adfm.200700019 ↗
34. A review of the mechanical behavior of cap and cap/polymer composites for applications in bone replacement and repair10.1016/j.actbio.2010.07.012 ↗
35. Macroporous biphasic calcium phosphate scaffolds reinforced by poly-l-lactic acid/hydroxyapatite nanocomposite coatings for bone regeneration10.1016/j.bej.2015.02.026 ↗
36. Effect of polymer infiltration on the flexural behavior of β-tricalcium phosphate robocast scaffolds10.3390/ma7054001 ↗
37. Fracture behavior of hydroxyapatite/polymer interpenetrating network composites prepared by in situ polymerization process10.1016/S0921-5093(01)01250-3 ↗
38. In vitro ageing of brushite calcium phosphate cement10.1016/S0142-9612(03)00293-X ↗
39. Alge, D.L., Goebel, W.S., and Chu, T.M. (2013). Effects of dcpd cement chemistry on degradation properties and cytocompatibility: Comparison of MCPM/β-TCP and MCPM/HA formulations. Biomed. Mater., 8.10.1088/1748-6041/8/2/025010 ↗
40. Electrodeposition of brushite coatings and their transformation to hydroxyapatite in aqueous solutions10.1002/(SICI)1097-4636(19990615)45:4<302::AID-JBM4>3.0.CO;2-A ↗
41. Improvement of mechanical and biological properties of porous CASIO3 scaffolds by poly(d,l-lactic acid) modification10.1016/j.actbio.2007.08.010 ↗
42. Effect of culture conditions and calcium phosphate coating on ectopic bone formation10.1016/j.biomaterials.2013.03.088 ↗