journal article·2017-07-05Open access

An Injectable Glass Polyalkenoate Cement Engineered for Fracture Fixation and Stabilization

Basel Khader, Sean Peel, Mark Towler

Abstract

Glass polyalkenoate cements (GPCs) have potential as bio-adhesives due to their ease of application, appropriate mechanical properties, radiopacity and chemical adhesion to bone. Aluminium (Al)-free GPCs have been discussed in the literature, but have proven difficult to balance injectability with mechanical integrity. For example, zinc-based, Al-free GPCs reported compressive strengths of 63 MPa, but set in under 2 min. Here, the authors design injectable GPCs (IGPCs) based on zinc-containing, Al-free silicate compositions containing GeO2, substituted for ZnO at 3% increments through the series. The setting reactions, injectability and mechanical properties of these GPCs were evaluated using both a hand-mix (h) technique, using a spatula for sample preparation and application and an injection (i) technique, using a 16-gauge needle, post mixing, for application. GPCs ability to act as a carrier for bovine serum albumin (BSA) was also evaluated. Germanium (Ge) and BSA containing IGPCs were produced and reported to have working times between 26 and 44 min and setting times between 37 and 55 min; the extended handling properties being as a result of less Ge. The incorporation of BSA into the cement had no effect on the handling and mechanical properties, but the latter were found to have increased compression strength with the addition of Ge from between 27 and 37 MPa after 30 days maturation.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Orthopaedic implants and arthroplasty · Polymer Nanocomposites and Properties · Innovations in Concrete and Construction Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Mechanical Engineering, Faculty of Engineering and Architectural Science, Ryerson University, 350 Victoria Street, Toronto, ON M5B 2K3, Canada

Keenan Research Centre, St. Michael’s Hospital, Toronto, ON M5B 1T8, Canada

Division of Oral & Maxillofacial Surgery & Anaesthesia, Faculty of Dentistry, University of Toronto, Toronto, ON M5G 1G6, Canada

References (42)

Show source-provided references
1. Qui, Y., Hamilton, S.K., and Temenoff, J. (2011). Improving mechanical properties of injectable polymers and composites. Inject. Biomater. Sci. Appl., 61–91.10.1533/9780857091376.1.61 ↗
2. Tissue Engineering: Orthopedic Applications10.1146/annurev.bioeng.1.1.19 ↗
3. A natural bone cement—A laboratory novelty led to the development of revolutionary new biomaterials10.6028/jres.106.053 ↗
4. Wren, A.W. (2008). Strontium Substituted Glass Ionomer Cements for Skeletal Applications. [Ph.D. Thesis, University of Limerick].
5. Bone repair in radii and tibias of rabbits with phosphorylated chitosan reinforced calcium phosphate cements10.1016/S0142-9612(02)00153-9 ↗
6. A biomechanical analysis of fixation of intra-articular distal radial fractures with calcium phosphate bone cement10.2106/00004623-200209000-00010 ↗
7. Calcium phosphate bone cement for treatment of distal radius fractures: A preliminary report10.1007/s007760200031 ↗
8. Yamamuro, T., and Onishi, H. (1992). Ceramic biomaterial. Manual of Orthopaedic Materials, Kanehara & Co., Ltd.. (In Japanese).
9. Biological reaction and clinical application of calcium phosphate cement. Kansetugeka
10. Addition of cohesion promotors to calcium phosphate cements10.1016/S0142-9612(98)00202-6 ↗
11. Early strength of glass ionomer cements10.1016/0109-5641(93)90107-2 ↗
12. Adhesive dental materials–A review10.1016/S0143-7496(98)00027-X ↗
13. Non metallic restorative materials based on glass ionomer cements-recent trends and developments10.1016/S0927-7757(99)00430-6 ↗
14. Chemistry of glass-ionomer cements: A review10.1016/S0142-9612(97)00128-2 ↗
15. Zinc ion release from novel hard tissue biomaterials
16. (2016, October 10). Endotherapeutics: Serenocem Ear Cement and Granules. Available online: http://www.endotherapeutics.com.au/serenocem.
17. (2016, October 10). Invotec International®: SerenocemTM Ostologic Cement. Available online: http://www.mundinc.com/uploads/serenocem_otologic_cement.pdf.
18. A spectroscopic investigation into the setting and mechanical properties of titanium containing glass polyalkenoate cements10.1007/s10856-010-4089-2 ↗
19. Quantitative evaluation of antibacterial activities of metallic oxide powders (ZnO, MgO and CaO) by conductimetric assay10.1016/S0167-7012(03)00037-X ↗
20. Effect of radiotherapy on the radiopacity and flexural strength of a composite resin
21. The role of Sr2+ on the structure and reactivity of SrO-CaO-ZnO-SiO2 ionomer glasses10.1007/s10856-006-0060-7 ↗
22. Comparison of failure mechanisms for cements used in skeletal luting applications10.1007/s10856-009-3724-2 ↗
23. Varshneya, A.K. (1994). Fundamentals of Inorganic Glasses, Gulf Professional Publishing Academic Press. [1st ed.].10.1016/B978-0-08-057150-8.50025-2 ↗
24. Khader, B.A., Curran, D.J., Peel, S., and Towler, M.R. (2016). Glass Polyalkenoate Cements Designed for Cranioplasty Applications: An Evaluation of Their Physical and Mechanical Properties. J. Funct. Biomater., 7.10.3390/jfb7020008 ↗
25. Modelling of the glass phase in fly ashes using network connectivity theory10.1002/jctb.581 ↗
26. (2007). Dentistry—Water-Based Cements-Part 1: Powder/Liquid Acid-Base Cements, ISO 9917-1, ISO.
27. (1991). Dentistry—Water-Based Cements-Part 1: Powder/Liquid Acid-Base Cements, ISO 9917, ISO.
28. Some factors controlling the injectability of calcium phosphate bone cements10.1023/A:1008811215655 ↗
29. The effect of the disc support system on biaxial tensile strength of a glass ionomer cement10.1016/S0109-5641(01)00053-7 ↗
30. The effect of particle size distribution on an experimental glass-ionomer cement10.1016/j.dental.2004.07.016 ↗
31. Aluminum-free glass polyalkenoate cements: Ion release and in vitro antibacterial efficacy10.1007/s10856-013-4880-y ↗
32. Novel adaptations to zinc-silicate glass polyalkenoate cements: The unexpected influences of germanium based glasses on handling characteristics and mechanical properties10.1016/j.jmbbm.2013.03.012 ↗
33. West, A.R., and Baxter, H. (1993). Acid-Base Cements: Their Biomedical and Industrial Applications (Chemistry of Solid State Materials), Cambridge University Press.
34. Gallium containing glass polyalkenoate anti-cancerous bone cements: Glass characterization and physical properties10.1007/s10856-012-4624-4 ↗
35. The processing, mechanical properties and bioactivity of zinc based glass ionomer cements10.1007/s10856-005-3578-1 ↗
36. Influence of alkali metal ions on the fracture properties of glass polyalkenoate (ionomer) cements10.1016/S0142-9612(97)00129-4 ↗
37. Strontium-based glass polyalkenoate cements for luting applications in the skeleton10.1177/0885328208099085 ↗
38. The fracture properties of glass polyalkenoate cements as a function of cement age10.1007/BF00353190 ↗
39. Structural modes of a polymer in the repton model10.1063/1.3580287 ↗
40. Discretized model of entangled-polymer dynamics10.1103/PhysRevLett.59.1946 ↗
41. Tube theory of entangled polymer dynamics10.1080/00018730210153216 ↗
42. Mechanical property-porosity relationships of layered calcium silicate hydrate phases10.1617/s11527-012-9990-3 ↗