journal article·2020-05-20Open access

Anti-Bacterial Properties and Biocompatibility of Novel SiC Coating for Dental Ceramic

Samira Esteves Afonso Camargo, Azeem S. Mohiuddeen, Chaker Fares, Jessica L. Partain, Patrick H. Carey, Fan Ren, Shu-Min Hsu, Arthur E. Clark, Josephine F. Esquivel-Upshaw

Abstract

A 200 nm plasma-enhanced chemical vapor-deposited SiC was used as a coating on dental ceramics to improve anti-bacterial properties for the applications of dental prosthesis. A thin SiO2 (20 nm) in the same system was deposited first, prior to SiC deposition, to improve the adhesion between SiC to dental ceramic. Silane and methane were the precursors for SiC deposition, and the SiO2 deposition employed silane and nitrous oxide as the precursors. SiC antimicrobial activity was evaluated on the proliferation of biofilm, Streptococcus sanguinis, and Streptococcus mutans on SiC-coated and uncoated dental ceramics for 24 h. The ceramic coating with SiC exhibited a biofilm coverage of 16.9%, whereas uncoated samples demonstrated a significantly higher biofilm coverage of 91.8%, measured with fluorescence and scanning electron microscopic images. The cytotoxicity of the SiC coating was evaluated using human periodontal ligament fibroblasts (HPdLF) by CellTiter-BlueCell viability assay. After 24 h of HPdLF cultivation, no obvious cytotoxicity was observed on the SiC coating and control group; both sets of samples exhibited similar cell adhesion and proliferation. SiC coating on a ceramic demonstrated antimicrobial activity without inducing cytotoxic effects.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Dental materials and restorations · Dental Implant Techniques and Outcomes · Oral microbiology and periodontitis research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Restorative Dental Sciences, Division of Prosthodontics, University of Florida College of Dentistry, Gainesville, FL 32610, USA

Department of Chemical Engineering, University of Florida Herbert Wertheim College of Engineering, Gainesville, FL 32611, USA

Funding

National Institutes of Health

References (48)

Show source-provided references
1. In vitro and in vivo studies of anti-bacterial copper-bearing titanium alloy for dental application10.1016/j.dental.2018.04.007 ↗
2. Antibacterial effect of copper-bearing titanium alloy (Ti-Cu) against Streptococcus mutans and Porphyromonas gingivalis10.1038/srep29985 ↗
3. Titanium-Nitride Coating of Orthopaedic Implants: A Review of the Literature
4. In vitro evaluation of a multispecies oral biofilm over antibacterial coated titanium surfaces10.1007/s10856-018-6168-8 ↗
5. In vitro studies of nanosilver-doped titanium implants for oral and maxillofacial surgery10.2147/IJN.S131163 ↗
6. The microbiota associated with successful or failing osseointegrated titanium implants10.1111/j.1399-302X.1987.tb00298.x ↗
7. Antibacterial effects and biocompatibility of titanium surfaces with graded silver incorporation in titania nanotubes10.1016/j.biomaterials.2014.02.005 ↗
8. Antibacterial and Microstructure Properties of Titanium Surfaces Modified with Ag-Incorporated Nanotube Arrays10.1590/1980-5373-MR-2015-0534 ↗
9. Antibacterial activity of dental implant metals10.1097/00008505-199200110-00006 ↗
10. Antibacterial Properties of Charged TiN Surfaces for Dental Implant Application
11. Anggraini, L., Isonishi, K., and Ameyama, K. (2020, January 19). Toughening and Strengthening of Ceramics Composite through Microstructural Refinement. Available online: https://aip.scitation.org/doi/abs/10.1063/1.4945458.
12. Effective Sintering Aids for Silicon Carbide Ceramics: Reactivities of Silicon Carbide with Various Additives10.1111/j.1151-2916.1986.tb07398.x ↗
13. Strengthening and Toughening Mechanisms of Ceramic Nanocomposites10.1111/j.1151-2916.1998.tb02503.x ↗
14. Rudneva, V.V., Galevsky, G.V., and Kozyrev, N.A. (2015). Silicon nano-carbide in strengthening and ceramic technologies. IOP Conf. Series Mater. Sci. Eng., 91.10.1088/1757-899X/91/1/012003 ↗
15. Microstructural Control for Strengthening of Silicon Carbide Ceramics10.1111/j.1151-2916.1999.tb02181.x ↗
16. Understanding the Mechanism of SiC Plasma-Enhanced Chemical Vapor Deposition (PECVD) and Developing Routes toward SiC Atomic Layer Deposition (ALD) with Density Functional Theory10.1021/acsami.8b00794 ↗
17. PECVD silicon carbide as a chemically resistant material for micromachined transducers10.1016/S0924-4247(98)00111-3 ↗
18. Flannery, A.F., Mourlas, N.J., Storment, C.W., Tsai, S., Tan, S.H., and Kovacs, G.T.A. (1997, January 16–19). PECVD silicon carbide for micromachined transducers. Proceedings of the International Solid State Sensors and Actuators Conference (Transducers ’97), Chicago, IL, USA.
19. Huran, J., Hotovy, I., Pezoltd, J., Balalykin, N.I., and Kobzev, A.P. (2006, January 16–18). RF plasma deposition of thin amorphous silicon carbide films using a combination of silan and methane. Proceedings of the 2006 International Conference on Advanced Semiconductor Devices and Microsystems, Smolenice Castle, Slovakia.10.1109/ASDAM.2006.331153 ↗
20. Hijikata, Y. (2012). PECVD Amorphous Silicon Carbide (α-SiC) Layers for MEMS Applications. Physics and Technology of Silicon Carbide Devices, IntechOpen. Available online: https://www.intechopen.com/books/physics-and-technology-of-silicon-carbide-devices/pecvd-amorphous-silicon-carbide-sic-layers-for-mems-applications.10.5772/3428 ↗
21. Demonstration of SiO2/SiC-based protective coating for dental ceramic prostheses10.1111/jace.16525 ↗
22. Hsu, S.-M., Ren, F., Chen, Z., Kim, M., Fares, C., Clark, A.E., Neal, D., and Esquivel-Upshaw, J.F. (2020). Novel Coating to Minimize Corrosion of Glass-Ceramics for Dental Applications. Materials, 13.10.3390/ma13051215 ↗
23. Oral multispecies biofilm development and the key role of cell-cell distance10.1038/nrmicro2381 ↗
24. Quantitative NMR metabolite profiling of methicillin-resistant and methicillin-susceptible Staphylococcus aureus discriminates between biofilm and planktonic phenotypes10.1021/pr500120c ↗
25. Concise review of mechanisms of bacterial adhesion to biomaterial surfaces10.1002/(SICI)1097-4636(199823)43:3<338::AID-JBM16>3.0.CO;2-B ↗
26. Concise review of mechanisms of bacterial adhesion to biomaterials and of techniques used in estimating bacteria-material interactions10.22203/eCM.v008a05 ↗
27. Adherence of Streptococcus mutans on lithium disilicate porcelain specimens10.1016/j.prosdent.2015.06.017 ↗
28. Monolithic Ceramics: Effect of Finishing Techniques on Surface Properties, Bacterial Adhesion and Cell Viability10.2341/17-011-L ↗
29. What constitutes dental caries? Histopathology of carious enamel and dentin related to the action of cariogenic biofilms10.1177/154405910408301s07 ↗
30. Influence of saliva substitute films on initial Streptococcus mutans adhesion to enamel and dental substrata10.1016/j.jdent.2008.08.004 ↗
31. In vivo and in vitro biofilm formation on two different titanium implant surfaces10.1111/j.1600-0501.2009.01815.x ↗
32. Differential diagnosis of denture-induced stomatitis, Candida, and their variations in patients using complete denture: A clinical and mycological study10.1111/j.1439-0507.2008.01592.x ↗
33. In vitro adherence of oral streptococci to zirconia core and veneering glass-ceramics10.1002/jbm.b.31397 ↗
34. The influence of surface free energy and surface roughness on early plaque formation. An in vivo study in man10.1111/j.1600-051X.1990.tb01077.x ↗
35. An in vivo study of the influence of the surface roughness of implants on the microbiology of supra- and sub-gingival plaque10.1177/00220345930720090801 ↗
36. Effect of material characteristics and/or surface topography on biofilm development10.1111/j.1600-0501.2006.01353.x ↗
37. Graded Nano Glass-Zirconia Material for Dental 37. Applications-Part II Biocompatibility Evaluation10.1166/jbn.2017.2379 ↗
38. In vitro biocompatibility of new bioactive lithia-silica glass-ceramics10.1016/j.msec.2018.09.006 ↗
39. Effects of Manufacturing and Finishing Techniques of Feldspathic Ceramics on Surface Topography, Biofilm Formation, and Cell Viability for Human Gingival Fibroblasts10.2341/17-126-L ↗
40. Adhesion of oral streptococci to all-ceramics dental restorative materials in vitro10.1007/s10856-008-3457-7 ↗
41. Surface properties and in vitro Streptococcus mutans adhesion to self-etching adhesives
42. In vivo biofilm formation on different dental ceramics
43. Streptococcus mutans and Streptococcus sobrinus biofilm formation and metabolic activity on dental materials10.3109/00016357.2011.600703 ↗
44. Streptococcus sanguinis biofilm formation & interaction with oral pathogens10.2217/fmb-2018-0043 ↗
45. The effect of dental restorative materials on dental biofilm10.1046/j.0909-8836.2001.101160.x ↗
46. Adhesion and Early Colonization of S. Mutans on Lithium Disilicate Reinforced Glass-Ceramics, Monolithic Zirconia and Dual Cure Resin Cement
47. Influence of CAD/CAM all-ceramic materials on cell viability, migration ability and adenylate kinase release of human gingival fibroblasts and oral keratinocytes10.1007/s00784-013-1098-9 ↗
48. Bioactivity and cytotoxicity of glass and glass-ceramics based on the 3CaO·P2O5-SiO2-MgO system10.1007/s10856-013-4972-8 ↗