journal article·2025-12-03Open access

Three-Dimensional Bioprinting of Regenerative Cartilage Constructs with Directional Ionically Derived Stiffness Gradients

Maryam Hosseini, Angeliki Dimaraki, Gerjo. J. V. M. van Osch, Lidy E. Fratila-Apachitei, Pedro J. Díaz-Payno, Amir A. Zadpoor

Journal of Functional Biomaterials· Volume 16· Issue 12

Abstract

Tissue engineering approaches for cartilage tissue regeneration are expanding to include the complex features of the tissue, such as the biological and mechanical gradients. Many of these approaches are, however, based on the use of multiple biomaterials or concentrations, and crosslinking methods that make it difficult to integrate and control the properties of the resulting scaffolds. In this study, a 3D bioprinted scaffold with a stiffness gradient was fabricated by using a single biomaterial type and concentration combined with a directional ionic crosslinking method. The scaffolds revealed a gradient in stiffness from 39.8 ± 6.6 kPa at the top to 60.6 ± 10.9 kPa at the bottom of the scaffolds. Live/dead analysis of human chondrocytes embedded in the scaffolds showed no negative effects of the stiffness gradient on cell viability over 28 days. The induced stiffness gradient led to a gradient in cell density and sulfated glycosaminoglycan deposition in the bioprinted tissue constructs with enhanced values in the softer top region of the scaffolds as compared to the stiffer bottom part. This study showed a novel method to generate scaffolds with stiffness gradients from a single biomaterial and indicates that such scaffolds could be used to spatially regulate the behavior of chondrocytes and the associated deposition of the cartilage matrix.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Osteoarthritis Treatment and Mechanisms · 3D Printing in Biomedical Research · Bone Tissue Engineering Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Biomechanical Engineering, Faculty of Mechanical Engineering, Delft University of Technology, 2628 CD Delft, The Netherlands

Department of Orthopedics and Sports Medicine, Erasmus MC, University Medical Center, 3015 CN Rotterdam, The Netherlands

Department of Otorhinolaryngology, Head and Neck Surgery, Erasmus MC, University Medical Center, 3015 CN Rotterdam, The Netherlands

IMDEA Materials Institute, 28906 Getafe, Madrid, Spain

Department of Orthopedics, Leiden University Medical Center, 2333 ZG Leiden, The Netherlands

Funding

Dutch Medical Delta project

References (33)

Show source-provided references
1. Emerging Technologies in Multi-Material Bioprinting10.1002/adma.202104730 ↗
2. 3D extrusion bioprinting10.1038/s43586-021-00073-8 ↗
3. 3D bioprinting spatiotemporally defined patterns of growth factors to tightly control tissue regeneration10.1126/sciadv.abb5093 ↗
4. Extrusion-Based 3D Bioprinting of Gradients of Stiffness, Cell Density, and Immobilized Peptide Using Thermogelling Hydrogels10.1021/acsbiomaterials.1c00183 ↗
5. Biomechanics of Diarthrodial Joints: A Review of Twenty Years of Progress10.1115/1.2895525 ↗
6. The influence of matrix elasticity on chondrocyte behavior in 3D10.1002/term.501 ↗
7. Zone-dependent mechanical properties of human articular cartilage obtained by indentation measurements10.1007/s10856-018-6066-0 ↗
8. Zhou, J., Li, Q., Tian, Z., Yao, Q., and Zhang, M. (2023). Recent advances in 3D bioprinted cartilage-mimicking constructs for applications in tissue engineering. Mater. Today Bio, 23.10.1016/j.mtbio.2023.100870 ↗
9. Dimaraki, A., Díaz-Payno, P.J., Minneboo, M., Nouri-Goushki, M., Hosseini, M., Kops, N., Narcisi, R., Mirzaali, M.J., van Osch, G.J.V.M., and Fratila-Apachitei, L.E. (2021). Bioprinting of a Zonal-Specific Cell Density Scaffold: A Biomimetic Approach for Cartilage Tissue Engineering. Appl. Sci., 11.10.3390/app11177821 ↗
10. 3D bioprinting dual-factor releasing and gradient-structured constructs ready to implant for anisotropic cartilage regeneration10.1126/sciadv.aay1422 ↗
11. 3D printing of novel osteochondral scaffolds with graded microstructure10.1088/0957-4484/27/41/414001 ↗
12. Advances in the Fabrication of Biomaterials for Gradient Tissue Engineering10.1016/j.tibtech.2020.06.005 ↗
13. A layered agarose approach to fabricate depth-dependent inhomogeneity in chondrocyte-seeded constructs10.1016/j.orthres.2004.05.015 ↗
14. Sunyer, R., Jin, A.J., Nossal, R., and Sackett, D.L. (2012). Fabrication of Hydrogels with Steep Stiffness Gradients for Studying Cell Mechanical Response. PLoS ONE, 7.10.1371/journal.pone.0046107 ↗
15. Visible Light-Induced 3D Bioprinting Technologies and Corresponding Bioink Materials for Tissue Engineering: A Review10.1016/j.eng.2020.05.021 ↗
16. Gradient Hydrogels for Optimizing Niche Cues to Enhance Cell-Based Cartilage Regeneration10.1089/ten.tea.2020.0158 ↗
17. ‘Printability’ of Candidate Biomaterials for Extrusion Based 3D Printing: State-of-the-Art10.1002/adhm.201700264 ↗
18. Sánchez, E.M., Gómez-Blanco, J.C., Nieto, E.L., Casado, J.G., Macías-García, A., Díez, M.A.D., Carrasco-Amador, J.P., Martín, D.T., Sánchez-Margallo, F.M., and Pagador, J.B. (2020). Hydrogels for Bioprinting: A Systematic Review of Hydrogels Synthesis, Bioprinting Parameters, and Bioprinted Structures Behavior. Front. Bioeng. Biotechnol., 8.10.3389/fbioe.2020.00776 ↗
19. Shape-memory porous alginate scaffolds for regeneration of the annulus fibrosus: Effect of TGF-β3 supplementation and oxygen culture conditions10.1016/j.actbio.2013.12.037 ↗
20. Characterization of the structure and diffusion behavior of calcium alginate gel beads10.1002/app.48923 ↗
21. Sodium alginate film: The effect of crosslinker on physical and mechanical properties10.1088/1757-899X/509/1/012063 ↗
22. Molina, M.I.E., Chen, C.-A., Martinez, J., Tran, P., and Komvopoulos, K. (2022). Novel Electrospun Polycaprolactone/Calcium Alginate Scaffolds for Skin Tissue Engineering. Materials, 16.10.3390/ma16010136 ↗
23. Computational modelling of local calcium ions release from calcium phosphate-based scaffolds10.1007/s10237-016-0827-9 ↗
24. Li, X., Senda, K., Ito, A., Sogo, Y., and Yamazaki, A. (2008). Effect of Zn and Mg in tricalcium phosphate and in culture medium on apoptosis and actin ring formation of mature osteoclasts. Biomed. Mater., 3.10.1088/1748-6041/3/4/045002 ↗
25. Characterization of structure, physico-chemical properties and diffusion behavior of Ca-Alginate gel beads prepared by different gelation methods10.1016/j.jcis.2014.06.048 ↗
26. Mimicking Cartilage Tissue Zonal Organization by Engineering Tissue-Scale Gradient Hydrogels as 3D Cell Niche10.1089/ten.tea.2016.0453 ↗
27. Primary human chondrocyte extracellular matrix formation and phenotype maintenance using RGD-derivatized PEGDM hydrogels possessing a continuous Young’s modulus gradient10.1016/j.actbio.2012.12.028 ↗
28. Yoon, S.-J., Yoo, Y., Nam, S.E., Hyun, H., Lee, D.-W., Um, S., Kim, S.Y., Hong, S.O., Yang, D.H., and Chun, H.J. (2018). The Cocktail Effect of BMP-2 and TGF-β1 Loaded in Visible Light-Cured Glycol Chitosan Hydrogels for the Enhancement of Bone Formation in a Rat Tibial Defect Model. Mar. Drugs, 16.10.3390/md16100351 ↗
29. Biochemical and Physical Signal Gradients in Hydrogels to Control Stem Cell Behavior10.1002/adma.201302364 ↗
30. Bachmann, B., Spitz, S., Schädl, B., Teuschl, A.H., Redl, H., Nürnberger, S., and Ertl, P. (2020). Stiffness Matters: Fine-Tuned Hydrogel Elasticity Alters Chondrogenic Redifferentiation. Front. Bioeng. Biotechnol., 8.10.3389/fbioe.2020.00373 ↗
31. The biomechanical role of the chondrocyte pericellular matrix in articular cartilage10.1016/j.actbio.2005.02.001 ↗
32. Soft substrates direct stem cell differentiation into the chondrogenic lineage without the use of growth factors10.1177/20417314221122121 ↗
33. Hindered diffusion in agarose gels: Test of effective medium model10.1016/S0006-3495(96)79645-5 ↗