journal article·2025-11-25Open access

Effect of Iron on the Microstructure, Mechanical Properties, Corrosion Behavior, and Biocompatibility of Mechanically Alloyed Zn-3Ag Biodegradable Alloys

Ilker Emin Dag, Ebru Erdal, Mohsen Mhadhbi, Baris Avar

Journal of Functional Biomaterials· Volume 16· Issue 12

Abstract

Novel pure Zn and Zn-3Ag-xFe (x = 0, 1, 3, 5) (wt.%) nanocrystalline powders were synthesized for potential use as implants and stent materials by the mechanical alloying (MA) technique. The morphological and structural alterations of the powders milled for 5, 10, and 20 h were examined. SEM research revealed that during MA, the original elemental powder particles were subjected to a cold-welding process, subsequently fracturing in a brittle manner. The EDX spectra of the powders milled for 20 h indicated a uniform distribution of components. Laser diffraction particle size examination proved that the Zn-3Ag-1Fe alloy had the smallest particle size at 58.8 µm. XRD examination indicates the existence of AgZn3 and Fe3Zn10 intermetallic phases. The crystallite size diminishes with prolonged milling time, decreasing from 130 nm to 30 nm. The porosity rose from 11.62% for pure Zn to 15.35% in the Zn-3Ag-5Fe alloy, suggesting that the incorporation of Ag and the higher Fe ratio diminished the compressibility of the milled powders, as evidenced by density tests. The Zn-3Ag-5Fe alloy exhibited the maximum corrosion current density of 164.65 µA/cm2, attributed to the microgalvanic effect and reduced relative density induced by the Fe3Zn10 phase, which escalated with higher Fe doping. The hardness of the Zn-3Ag-5Fe alloy rose from 34.5 ± 2.8 HV to 132.2 ± 4.6 HV compared to the pure Zn sample, while the wear coefficient decreased from 0.029 ± 0.003 mm3/Nm to 0.005 ± 0.001 mm3/Nm, corresponding with the hardness test results. In contrast to S. aureus, which exhibited an 87.8% susceptibility to antibacterial activity from 3% silver and iron additions, E. coli demonstrated over 85% susceptibility to antibacterial activity from silver addition alone. The Zn-3Ag and Zn-3Ag-1Fe samples demonstrated high biocompatibility, attaining cell survival rates of 99.2% ± 3.01% and 99.2% ± 4.02% for the 12.5% extract, respectively. This study demonstrates that the newly developed Zn-Ag-xFe alloys have exceptional mechanical properties and excellent biocompatibility. Furthermore, the variable biodegradation rate dependent on alloy type presents an avenue for further research.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · High Entropy Alloys Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Nanotechnology Engineering, Zonguldak Bülent Ecevit University, Zonguldak 67100, Türkiye

Department of Metallurgical and Materials Engineering, Zonguldak Bülent Ecevit University, Zonguldak 67100, Türkiye

Advanced Technologies Application and Research Center, Ankara Yıldırım Beyazıt University, Ankara 06031, Türkiye

Laboratory of Useful Materials, National Institute of Research and Physicochemical Analysis, Technopole Sidi Thabet, Ariana 2020, Tunisia

Funding

Scientific Research Projects Coordination Unit of Zonguldak Bülent Ecevit University

References (64)

Show source-provided references
1. Effects of Porosity on the Corrosion Behaviour of PM-Fabricated Titanium Foams for Biomedical Applications10.1016/j.ijoes.2024.100495 ↗
2. Powder Metallurgy of Zn–Mn/CNF Biodegradable Composites: Role of Ball Milling and Sintering on Material Performance10.1016/j.matchemphys.2024.130314 ↗
3. Biodegradable Metals10.1016/j.mser.2014.01.001 ↗
4. Structural and Temporal Dynamics Analysis of Zinc-Based Biomaterials: History, Research Hotspots and Emerging Trends
5. Katarivas Levy, G., Goldman, J., and Aghion, E. (2017). The Prospects of Zinc as a Structural Material for Biodegradable Implants—A Review Paper. Metals, 7.10.3390/met7100402 ↗
6. Cimpoesu, N., Paleu, V., Panaghie, C., Roman, A.-M., Cazac, A.M., Cioca, L.-I., Bejinariu, C., Lupescu, S.C., Axinte, M., and Popa, M. (2024). Mechanical Properties and Wear Resistance of Biodegradable ZnMgY Alloy. Metals, 14.10.3390/met14070836 ↗
7. Additive Manufacturing of Biodegradable Zn-XWE43 Porous Scaffolds: Formation Quality, Microstructure and Mechanical Properties10.1016/j.matdes.2019.107937 ↗
8. Supersaturated Solid Solution Enhanced Biodegradable Zn-Mn Alloys Prepared by Mechanical Alloying and Selective Laser Melting10.1016/j.jallcom.2023.169145 ↗
9. Alloying Design of Biodegradable Zinc as Promising Bone Implants for Load-Bearing Applications10.1038/s41467-019-14153-7 ↗
10. Li, H.F., Xie, X.H., Zheng, Y.F., Cong, Y., Zhou, F.Y., Qiu, K.J., Wang, X., Chen, S.H., Huang, L., and Tian, L. (2015). Development of Biodegradable Zn-1X Binary Alloys with Nutrient Alloying Elements Mg, Ca and Sr. Sci. Rep., 5.10.1038/srep10719 ↗
11. Biodegradable Zn-0.5Li Alloy Rib Plate: Processing Procedure Development and in Vitro Performance Evaluation10.1016/j.jmst.2022.09.017 ↗
12. In Vitro and in Vivo Studies of Zn-Mn Biodegradable Metals Designed for Orthopedic Applications10.1016/j.actbio.2020.03.009 ↗
13. Systematic in Vitro and in Vivo Study on Biodegradable Binary Zn-0.2 At% Rare Earth Alloys (Zn-RE: Sc, Y, La–Nd, Sm–Lu)
14. Advances on Biodegradable Zinc-Silver-Based Alloys for Biomedical Applications
15. Ortopedik implantlarda kullanılan biyomalzemeler TT—Biomaterials used in orthopedic implants10.5505/pajes.2019.46666 ↗
16. Introducing Novel Bioabsorbable Zn–Ag–Mg Alloys Intended for Cardiovascular Applications10.1016/j.mtcomm.2023.105544 ↗
17. Selective Laser Melting of Zn–Ag Alloys for Bone Repair: Microstructure, Mechanical Properties and Degradation Behaviour10.1080/17452759.2018.1458991 ↗
18. Towards Revealing Key Factors in Mechanical Instability of Bioabsorbable Zn-Based Alloys for Intended Vascular Stenting10.1016/j.actbio.2020.01.028 ↗
19. Xue, P., Ma, M., Li, Y., Li, X., Yuan, J., Shi, G., Wang, K., and Zhang, K. (2020). Microstructure, Mechanical Properties, and in Vitro Corrosion Behavior of Biodegradable Zn-1Fe-XMg Alloy. Materials, 13.10.3390/ma13214835 ↗
20. Microstructure, Mechanical Property and Corrosion Behavior of Biomedical Zn-Fe Alloy Prepared by Low-Temperature Sintering10.1016/j.jallcom.2022.167812 ↗
21. Biodegradable Zinc-Iron Alloys: Complex Study of Corrosion Behavior, Mechanical Properties and Hemocompatibility10.1016/j.pnsc.2021.01.002 ↗
22. Tang, L., Chen, H., Zhu, X., Zubair, M., Sun, T., Yang, L., Lu, X., and Song, Z. (2025). Enhancing Mechanical and Biodegradation Properties of Zn-0.5Fe Alloys Through Rotary Forging. Materials, 18.10.3390/ma18030722 ↗
23. Effects of Li Addition on the Properties of Biodegradable Zn–Fe–Li Alloy: Microstructure, Mechanical Properties, Corrosion Behavior, and Cytocompatibility10.1016/j.mtcomm.2024.108661 ↗
24. Improved Mechanical, Degradation, and Biological Performances of Zn–Fe Alloys as Bioresorbable Implants
25. Avior, O., Ben Ghedalia-Peled, N., Ron, T., Vago, R., and Aghion, E. (2020). The Effect of Ca on In Vitro Behavior of Biodegradable Zn-Fe Alloy in Simulated Physiological Environments. Metals, 10.10.3390/met10121624 ↗
26. In Vivo Performances of Pure Zn and Zn-Fe Alloy as Biodegradable Implants10.1007/s10856-018-6096-7 ↗
27. Xu, Y., Xu, Y., Zhang, W., Li, M., Wendel, H.-P., Geis-Gerstorfer, J., Li, P., Wan, G., Xu, S., and Hu, T. (2022). Biodegradable Zn-Cu-Fe Alloy as a Promising Material for Craniomaxillofacial Implants: An in Vitro Investigation into Degradation Behavior, Cytotoxicity, and Hemocompatibility. Front. Chem., 10.10.3389/fchem.2022.860040 ↗
28. Fabrication and Performance of Zinc-Based Biodegradable Metals: From Conventional Processes to Laser Powder Bed Fusion
29. Mechanical Properties, Biodegradable Behavior and Biocompatibility of Zn-0.5Ti Alloy Membranes Produced by Powder Metallurgy for Guided Bone Regeneration10.1016/j.matlet.2024.136899 ↗
30. Biodegradable Zinc Alloys and Composites for Biomedical Application: An Overview of Processing Routes and Possible Future Work
31. Čákyová, V., Gorejová, R., Kupková, M., Sopčák, T., Strečková, M., Fáberová, M., Özaltin, K., Džupon, M., and Oriňaková, R. (2025). Study of Zn-Ag Alloys Prepared via Powder Metallurgy. SSRN.10.2139/ssrn.5115727 ↗
32. Effects of Alloying Elements on Performance of Biodegradable Magnesium Alloy10.1016/j.matpr.2021.08.233 ↗
33. Effect of Sintering Temperature on the Physico-Mechanical Behavior of SiC Reinforced Zinc-Magnesium Based Composite10.1007/s12540-020-00748-z ↗
34. Mechanical and Degradation Behaviour of Biodegradable Magnesium–Zinc/Hydroxyapatite Composite with Different Powder Mixing Techniques10.1016/j.jma.2019.11.003 ↗
35. (2023). Metallic Materials—Vickers Hardness Test—Part 1: Test Method (Standard No. TN EN ISO 6507-1).
36. Microstructure, Mechanical Properties, and Antibacterial Performance of Novel Fe-Mn-Zn Nanocrystalline Alloys Produced by Mechanical Alloying10.1002/adem.202500049 ↗
37. Evaluation of the Microstructural, Mechanical, and Corrosion Behavior of BN-, B4C-, and FeB-Added Distaloy AE Composites Produced by High-Energy Ball Milling and Hot-Pressing10.1007/s13632-025-01169-3 ↗
38. Mechanical Alloying and Milling10.1016/S0079-6425(99)00010-9 ↗
39. Sumner, M., Harison, J., and Elda, S. (2018). Pearson New International Edition. British Library Cataloguing-in-Publication Data, British Library.
40. Suryanarayana, C., and Norton, M.G. (1998). X-Rays and Diffraction BT. X-Ray Diffraction: A Practical Approach, Springer US.10.1007/978-1-4899-0148-4 ↗
41. The Grain Refining Mechanism of Cast Zinc through Silver Inoculation10.1016/j.actamat.2014.07.026 ↗
42. Fabrication, Mechanical Properties and in Vitro Degradation Behavior of Newly Developed ZnAg Alloys for Degradable Implant Applications10.1016/j.msec.2017.04.023 ↗
43. Synthesis and Microstructural Characterization of Al–Mg Alloy–SiC Particle Composite10.1016/j.matlet.2008.01.002 ↗
44. Fabrication and Properties of Porous Zn-Ag Alloy Scaffolds as Biodegradable Materials10.1016/j.matchemphys.2018.08.023 ↗
45. A Comprehensive Study on Microstructure, in-Vitro Biodegradability, Bacterial Sensitivity, and Cellular Interactions of Novel Ternary Zn-Cu-XAg Alloys for Urological Applications10.1016/j.jallcom.2023.171290 ↗
46. Akinwekomi, A.D., and Akhtar, F. (2023). Tunability of Mechanical and Biodegradation Properties of Zinc-Based Biomaterial with Calcium Micronutrient Alloying. J. Mech. Behav. Biomed. Mater., 140.10.1016/j.jmbbm.2023.105724 ↗
47. Youness, R.A., and Taha, M.A. (2024). Tuning Biodegradability, Bone-Bonding Capacity, and Wear Resistance of Zinc-30% Magnesium Intermetallic Alloy for Use in Load-Bearing Bone Applications. Sci. Rep., 14.10.1038/s41598-024-52648-6 ↗
48. Effects of Zn Concentration and Heat Treatment on the Microstructure, Mechanical Properties and Corrosion Behavior of as-Extruded Mg-Zn Alloys Produced by Powder Metallurgy10.1016/j.jallcom.2016.10.017 ↗
49. Jara-Chávez, G., Amaro-Villeda, A., Campillo-Illanes, B., Ramírez-Argáez, M., and González-Rivera, C. (2024). Effect of Ag and Cu Content on the Properties of Zn-Ag-Cu-0.05Mg Alloys. Metals, 14.10.3390/met14070740 ↗
50. Investigation of Zinc-Silver Alloys as Biodegradable Metals for Orthopedic Applications10.1016/j.jmrt.2023.09.025 ↗
51. Comparison of the Relationship between Hardness and Wear Resistance of Polycrystalline Diamond and Cubic Boron Nitride10.1111/jace.19839 ↗
52. A Biodegradable in Situ Zn–Mg2Ge Composite for Bone-Implant Applications10.1016/j.actbio.2022.05.017 ↗
53. Investigation on Tribological Behaviors of Biodegradable Pure Zn and Zn-X (Li, Cu, Ge) Binary Alloys10.1007/s10856-021-06625-4 ↗
54. Bioresorbable AgCe and AgCeLa Alloys for Adapted Fe-Based Implants10.1016/j.matlet.2021.130890 ↗
55. Design Strategy for Biodegradable Fe-Based Alloys for Medical Applications10.1016/j.actbio.2009.07.039 ↗
56. Highly Ductile Zn-2Fe-WC Nanocomposite as Biodegradable Material10.1007/s11661-020-05878-y ↗
57. Gabay, N., Ron, T., Vago, R., Shirizly, A., and Aghion, E. (2021). Evaluating the Prospects of Ti-Base Lattice Infiltrated with Biodegradable Zn–2%Fe Alloy as a Structural Material for Osseointegrated Implants—In Vitro Study. Materials, 14.10.3390/ma14164682 ↗
58. Nová, K., Novák, P., Průša, F., Kopeček, J., and Čech, J. (2019). Synthesis of Intermetallics in Fe-Al-Si System by Mechanical Alloying. Metals, 9.10.3390/met9010020 ↗
59. Effect of the B4C Content on Microstructure, Microhardness, Corrosion, and Neutron Shielding Properties of Al–B4C Composites10.1016/j.ceramint.2022.10.071 ↗
60. A Biodegradable Zn-5Gd Alloy with Biomechanical Compatibility, Cytocompatibility, Antibacterial Ability, and in Vitro and in Vivo Osteogenesis for Orthopedic Applications10.1016/j.actbio.2024.01.018 ↗
61. (2009). Part 5: Tests for In Vitro Cytotoxicity (Standard No. TN EN ISO10993-5:2009).
62. Effects of Ag, Cu or Ca Addition on Microstructure and Comprehensive Properties of Biodegradable Zn-0.8Mn Alloy10.1016/j.msec.2019.02.044 ↗
63. Biodegradable Zn-1.5Cu-1.5Ag Alloy with Anti-Aging Ability and Strain Hardening Behavior for Cardiovascular Stents10.1016/j.msec.2020.111172 ↗
64. Additively Manufactured Zn-2Mg Alloy Porous Scaffolds with Customizable Biodegradable Performance and Enhanced Osteogenic Ability10.1002/advs.202307329 ↗