Electrospun Polycaprolactone–Gelatin Fibrils Enabled 3D Hydrogel Microcapsules for Biomedical Applications
Source abstract
Abstract
Microcapsules provide a microenvironment by improving the protection and delivery of cells and drugs to specific tissue areas, promoting cell integration and tissue regeneration. Effective microcapsules must not only be permeable for micronutrient diffusion but mechanically stable. Alginate hydrogel is one of the commonly used biomaterials for fabricating microcapsules due to its gel-forming ability and low toxicity. However, its mechanical instability, inertness, and excessive porosity have impeded its use. Embedding nanofibrils in the alginate hydrogel microcapsules improves their biological and mechanical properties. In this research, electrospun composite nanofibers of PCL–gelatin (PG) were first fabricated, characterized, and cryoground. The filtered and cryoground powder solution was mixed with the alginate solution and through electrospray, fabricated into microcapsules. Parameters such as flow rate, voltage, and hydrogel composition, which are critical in the electrostatic encapsulation process, were optimized. The microcapsules were further immersed in different solvent environments (DI water, complete media, and PBS), which were observed and compared for their morphology, size distribution, and mechanical stability properties. The average diameters of the PG nanofibers ranged between 0.2 and 2 μm, with an average porosity between 58 and 73%. The average size of the microcapsules varied between 300 and 900 μm, depending on the solvent environment. Overall, results showed an improved alginate 3D hydrogel network suitable for biomedical applications.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Electrospun Nanofibers in Biomedical Applications · Electrohydrodynamics and Fluid Dynamics · Advanced Sensor and Energy Harvesting Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Chemical, Biological and Bioengineering, North Carolina A&T State University, Greensboro, NC 27411, USA
Department of Industrial and Systems Engineering, North Carolina A&T State University, Greensboro, NC 27411, USA
Department of Applied Science and Technology, North Carolina A&T State University, Greensboro, NC 27411, USA
Funding
National Science Foundation
References (71)
Show source-provided references
1. Applications of cell microencapsulation10.1007/978-1-4939-6364-5_2 ↗
2. 2D nanomaterials for tissue engineering and regenerative nanomedicines: Recent advances and future challenges10.1002/adhm.202001743 ↗
3. A comprehensive review summarizing the effect of electrospinning parameters and potential applications of nanofibers in biomedical and biotechnology10.1016/j.arabjc.2015.11.015 ↗
4. Cell encapsulation using biopolymer gels for regenerative medicine10.1007/s10529-010-0221-0 ↗
5. Photopolymerized thermosensitive hydrogels: Synthesis, degradation, and cytocompatibility10.1021/bm7013075 ↗
6. Alginate-based biomaterials for regenerative medicine applications10.3390/ma6041285 ↗
7. Alginate and its application to tissue engineering10.1007/s42452-020-04096-w ↗
8. García-Briega, M.I., Ródenas-Rochina, J., Martins, L.A., Lanceros-Méndez, S., Gallego Ferrer, G., Sempere, A., and Gómez Ribelles, J.L. (2022). Stability of biomimetically functionalised alginate microspheres as 3D support in cell cultures. Polymers, 14.10.4995/Dataset/10251/187455 ↗
9. Lengyel, M., Kállai-Szabó, N., Antal, V., Laki, A.J., and Antal, I. (2019). Microparticles, microspheres, and microcapsules for advanced drug delivery. Sci. Pharm., 87.10.3390/scipharm87030020 ↗
10. Porous alginate/hydroxyapatite composite scaffolds for bone tissue engineering: Preparation, characterization, and in vitro studies10.1002/jbm.b.30065 ↗
11. Electrospun biodegradable nanofibers scaffolds for bone tissue engineering10.1002/app.42883 ↗
12. Electrospinning of polymeric and ceramic nanofibers as uniaxially aligned arrays10.1021/nl0344256 ↗
13. Effect of milling methods and its temperature on quality parameters of ByadagiChilli: With emphasis on cryogenic grinding
14. Effect of cryogrinding on chemical stability of the sparingly water-soluble drug furosemide10.1007/s11095-011-0496-4 ↗
15. Cryogenics and its application with reference to spice grinding: A review10.1080/10408398.2010.509552 ↗
16. Kraljić, K., Škevin, D., Čukelj Mustač, N., Benković, M., Drakula, S., Balbino, S., Mandura Jarić, A., Mamilović, K., Ramljak, I., and Ćurić, D. (2023). Influence of Cryogenic Grinding on the Nutritional and Antinutritional Components of Rapeseed Cake. Appl. Sci., 13.10.3390/app13105841 ↗
17. Cryogenic grinding of cotton fiber cellulose: The effect on physicochemical properties10.1016/j.carbpol.2022.119408 ↗
18. Choosing the right strategy: Cryogrinding vs. ball milling–comparing apples to apples10.1039/D1GC03128G ↗
19. A review on fabrication of nanofibers via electrospinning and their applications10.1007/s42452-019-1288-4 ↗
20. PCL/alginate composite scaffolds for hard tissue engineering: Fabrication, characterization, and cellular activities10.1021/co500033h ↗
21. Three-dimensional electrospun polycaprolactone (PCL)/alginate hybrid composite scaffolds10.1016/j.carbpol.2014.08.008 ↗
22. The development of an alginate/polycaprolactone composite scaffold for in situ transfection application10.1016/j.carbpol.2017.11.030 ↗
23. Surface modification of PCL-diopside fibrous membrane via gelatin immobilization for bone tissue engineering10.1016/j.matchemphys.2017.03.051 ↗
24. Farshidfar, N., Iravani, S., and Varma, R.S. (2023). Alginate-based biomaterials in tissue engineering and regenerative medicine. Mar. Drugs, 21.10.3390/md21030189 ↗
25. A synergistic relationship between polycaprolactone and natural polymers enhances the physical properties and biological activity of scaffolds10.1021/acsami.9b19715 ↗
26. Wang, X., Ao, Q., Tian, X., Fan, J., Tong, H., Hou, W., and Bai, S. (2017). Gelatin-Based Hydrogels for Organ 3D Bioprinting. Polymers, 9.10.3390/polym9090401 ↗
27. Skopinska-Wisniewska, J., Tuszynska, M., and Olewnik-Kruszkowska, E. (2021). Comparative study of gelatin hydrogels modified by various cross-linking agents. Materials, 14.10.3390/ma14020396 ↗
28. Electrospun nanofiber/hydrogel composite materials and their tissue engineering applications10.1016/j.jmst.2023.04.015 ↗
29. Fabrication and Characterization of Zn Particle Incorporated Fibrous Scaffolds for Potential Application in Tissue Healing and Regeneration10.1021/acsami.3c09793 ↗
30. Tettey, F., Siler-Dearring, J., Moody, A., and Bhattarai, N. (2023). Preparation and Characterization of Poliglecaprone-Incorporated Polycaprolactone Composite Fibrous Scaffolds. Fibers, 11.10.3390/fib11100082 ↗
31. Fabrication and characterization of PCL/gelatin composite nanofibrous scaffold for tissue engineering applications by electrospinning method10.1016/j.msec.2012.12.015 ↗
32. Magnesium incorporated polycaprolactone-based composite nanofibers
33. Embedding magnesium metallic particles in polycaprolactone nanofiber mesh improves applicability for biomedical applications10.1016/j.actbio.2019.04.061 ↗
34. Zingue, S., Njuh, A.N., Tueche, A.B., Tamsa, J., Tchoupang, E.N., Kakene, S.D., Sipping, M.T.K., and Njamen, D. (2018). In Vitro Cytotoxicity and In Vivo Antimammary Tumor Effects of the Hydroethanolic Extract of Acacia seyal (Mimosaceae) Stem Bark. Biomed. Res. Int., 2018.10.1155/2018/2024602 ↗
35. Bar-Shai, N., Sharabani-Yosef, O., Zollmann, M., Lesman, A., and Golberg, A. (2021). Seaweed cellulose scaffolds derived from green macroalgae for tissue engineering. Sci. Rep., 11.10.1038/s41598-021-90903-2 ↗
36. Bioinspired synthesis and characterization of zinc oxide nanoparticles and assessment of their cytotoxicity and antimicrobial efficacy10.1007/s42452-024-05719-2 ↗
37. Engineering biomimetic nanofiber microspheres with tailored size, predesigned structure, and desired composition via gas bubble–mediated coaxial electrospray10.1002/smll.201907393 ↗
38. Khanal, S., Bhattarai, S.R., Sankar, J., Bhandari, R.K., Macdonald, J.M., and Bhattarai, N. (2019). Nano-fibre integrated microcapsules: A nano-in-micro platform for 3D cell culture. Sci. Rep., 9.10.1038/s41598-019-50380-0 ↗
39. Sapkota, T., Shrestha, B.K., Shrestha, S., and Bhattarai, N. (2023). Chitin Nanofibrils Enabled Core–Shell Microcapsules of Alginate Hydrogel. Nanomaterials, 13.10.3390/nano13172470 ↗
40. Tatum, S.D., Saudi, S., Tettey, F., Bhandari, R.K., and Bhattarai, N. (2021). A Novel Hydrogel-Bronchial Epithelial Cell Spheroids for Toxicological Evaluation. Biomed. Sci. Instrum., 57.10.34107/KSZV7781.10406 ↗
41. Bioactive antibacterial bilayer PCL/gelatin nanofibrous scaffold promotes full-thickness wound healing10.1016/j.ijpharm.2020.119413 ↗
42. Improving mechanical properties of alginate hydrogel by reinforcement with ethanol treated polycaprolactone nanofibers10.1016/j.compositesb.2012.09.059 ↗
43. Interactions between gelatin and sodium alginate: UV and FTIR studies10.1080/01932691.2019.1611437 ↗
44. Incorporation of nanofibrillated chitosan into electrospun PCL nanofibers makes scaffolds with enhanced mechanical and biological properties10.1016/j.carbpol.2018.07.061 ↗
45. Superhydrophobic surfaces developed by mimicking hierarchical surface morphology of lotus leaf10.3390/molecules19044256 ↗
46. PCL/gelatin nanofibers incorporated with starfish polydeoxyribonucleotides for potential wound healing applications10.1016/j.matdes.2023.111912 ↗
47. Lashkari, M., Rahmani, M., Yousefpoor, Y., Ahmadi-Zeidabadi, M., Faridi-Majidi, R., Ameri, Z., Salary, M., Azizi, S., Shahabi, A., and Rahi, A. (2023). Cell-based wound dressing: Bilayered PCL/gelatin nanofibers-alginate/collagen hydrogel scaffold loaded with mesenchymal stem cells. Int. J. Biol. Macromol., 239.10.1016/j.ijbiomac.2023.124099 ↗
48. Microencapsulated islets as bioartificial endocrine pancreas10.1126/science.6776628 ↗
49. Improving viability of stem cells during syringe needle flow through the design of hydrogel cell carriers10.1089/ten.tea.2011.0391 ↗
50. Microcapsules and microcarriers for in situ cell delivery10.1016/j.addr.2010.02.004 ↗
51. Living cell factories-electrosprayed microcapsules and microcarriers for minimally invasive delivery10.1002/adma.201503598 ↗
52. Evaluation of electrospun PCL/gelatin nanofibrous scaffold for wound healing and layered dermal reconstitution10.1016/j.actbio.2007.01.002 ↗
53. Comparison of microencapsulation by emulsion-solvent extraction/evaporation technique using derivatives cellulose and acrylate-methacrylate copolymer as carriers
54. Formulation design of double-layer in the outer shell of dry-coated tablet to modulate lag time and time-controlled dissolution function: Studies on micronized ethylcellulose for dosage form design (VII)10.1208/aapsj060317 ↗
55. Adjustable volume and loading release of shape memory polymer microcapsules10.1080/19475411.2023.2166143 ↗
56. Cell microencapsulation with synthetic polymers10.1002/jbm.a.35205 ↗
57. Current challenges in microcapsule designs and microencapsulation processes: A review10.1021/acsami.4c02462 ↗
58. Versatile fabrication of polymer microcapsules with controlled shell composition and tunable performance via photopolymerization10.1021/acs.langmuir.3c00505 ↗
59. Tough, transparent, 3D-printable, and self-healing poly (ethylene glycol)-gel (PEGgel)10.1002/adma.202107791 ↗
60. Collu, M., Rossi, E., Giamberini, M., Sebastiani, M., Del Pezzo, R., Smets, J., and Bemporad, E. (2023). A Methodology for Multivariate Investigation on the Effect of Acrylate Molecular Structure on the Mechanical Properties and Delivery Efficiency of Microcapsules via In Situ Polymerization. Polymers, 15.10.3390/polym15204158 ↗
61. Polycaprolactone microcapsules containing citric acid and naringin for plant growth and sustainable agriculture: Physico-chemical properties and release behavior10.1016/j.scitotenv.2019.135548 ↗
62. Electrodynamic assisted self-assembled fibrous hydrogel microcapsules: A novel 3D in vitro platform for assessment of nanoparticle toxicity10.1039/D0RA09189H ↗
63. Li, P., Fu, L., Liao, Z., Peng, Y., Ning, C., Gao, C., Zhang, D., Sui, X., Lin, Y., and Liu, S. (2021). Chitosan hydrogel/3D-printed poly (ε-caprolactone) hybrid scaffold containing synovial mesenchymal stem cells for cartilage regeneration based on tetrahedral framework nucleic acid recruitment. Biomaterials, 278.10.1016/j.biomaterials.2021.121131 ↗
64. Comparison of different cationic polymers efficacy in fabrication of alginate multilayer microcapsules
65. Fabrication of dual network self-healing alginate/guar gum hydrogels based on polydopamine-type microcapsules from mesoporous silica nanoparticles10.1016/j.ijbiomac.2019.02.089 ↗
66. Bio-inspired self-healing structural color hydrogel10.1073/pnas.1703616114 ↗
67. Fabrication of core–shell microcapsules using PLGA and alginate for dual growth factor delivery system10.1016/j.jconrel.2010.07.103 ↗
68. Effect of microcapsule size on the performance of self-healing polymers10.1016/j.polymer.2007.04.008 ↗
69. An open source technology platform to manufacture hydrogel-based 3D culture models in an automated and standardized fashion
70. Omer, S., Forgách, L., Zelkó, R., and Sebe, I. (2021). Scale-up of Electrospinning: Market Overview of Products and Devices for Pharmaceutical and Biomedical Purposes. Pharmaceutics, 13.10.3390/pharmaceutics13020286 ↗
71. Yang, D., Tu, S., Chen, J., Zhang, H., Chen, W., Hu, D., and Lin, J. (2023). Phase Change Composite Microcapsules with Low-Dimensional Thermally Conductive Nanofillers: Preparation, Performance, and Applications. Polymers, 15.10.3390/polym15061562 ↗