journal article·2025-07-06Open access

Influence of Stent Structure on Mechanical and Degradation Properties of Poly (Lactic Acid) Vascular Stent

Shicheng He, Qiang Chen, Zhiyong Li

Abstract

Biodegradable vascular stents (BVSs) face challenges related to inadequate mechanical strength, which can lead to adverse clinical outcomes. Improving the mechanical behavior of biodegradable vascular stents through structural design has been extensively explored. However, the corresponding effects of these mechanical enhancements on degradation characteristics remain under-investigated. The present work focuses on examining how different stent design strategies affect the mechanical behavior and degradation characteristics of poly (lactic acid) (PLA) stents. The commercial PLA stent DESolve was adopted, and nine modified stents were constructed based on the geometrical configuration of the DESolve stent. The mechanical properties of the modified stents during radial crimping and three-point bending simulations were thoroughly studied. The degradation dynamics of the stents were characterized by four indices (i.e., mean number average molecular weight, residual volume fraction, mean von Mises stress, and stent diameter). The results indicated that both the widening ratio and direction affected the mechanical performance of the stents by increasing the radial stiffness and radial strength, minimizing recoil%, and decreasing the bending flexibility. Although the widening direction had a relatively minor influence on stent degradation, the associated increase in material volume contributed to an improved volumetric integrity and enhanced lumen preservation. This study established a theoretical basis for evaluating both the mechanical and degradation behaviors of PLA stents, offering valuable insights for future structural design optimization.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Coronary Interventions and Diagnostics · Orthopaedic implants and arthroplasty · Infectious Aortic and Vascular Conditions

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Biomechanics Laboratory, School of Biological Science & Medical Engineering, Southeast University, Nanjing 210096, China

School of Mechanical, Medical and Process Engineering, Queensland University of Technology, Brisbane, QLD 4001, Australia

Faculty of Sports Science, Ningbo University, Ningbo 315211, China

Funding

National Natural Science Foundation of China · National Key Research and Development Program of China

References (53)

Show source-provided references
1. Biodegradable coronary scaffolds: Their future and clinical and technological challenges10.1093/cvr/cvy097 ↗
2. A Review of Material Degradation Modelling for the Analysis and Design of Bioabsorbable Stents10.1007/s10439-015-1413-5 ↗
3. Development of magnesium-based biodegradable metals with dietary trace element germanium as orthopaedic implant applications10.1016/j.actbio.2017.10.004 ↗
4. Application of biodegradable implants in pediatric orthopedics: Shifting from absorbable polymers to biodegradable metals
5. A review on current research status of the surface modification of Zn-based biodegradable metals
6. Multi-objective structural optimization and degradation model of magnesium alloy ureteral stent10.1016/j.medntd.2024.100291 ↗
7. Sousa, A.M., Amaro, A.M., and Piedade, A.P. (2022). 3D Printing of Polymeric Bioresorbable Stents: A Strategy to Improve Both Cellular Compatibility and Mechanical Properties. Polymers, 14.10.3390/polym14061099 ↗
8. Additive manufacturing of vascular stents10.1016/j.actbio.2023.06.014 ↗
9. Research into biodegradable polymeric stents: A review of experimental and modelling work10.20517/2574-1209.2018.13 ↗
10. A Review of Bioresorbable Implantable Medical Devices: Materials, Fabrication, and Implementation10.1002/adhm.202000790 ↗
11. Structural optimization and finite element analysis of poly-l-lactide acid coronary stent with improved radial strength and acute recoil rate10.1002/jbm.b.34605 ↗
12. The Nidus for Possible Thrombus Formation Insight from the Microenvironment of Bioresorbable Vascular Scaffold10.1016/j.jcin.2016.08.019 ↗
13. Bioresorbable Scaffold The Emerging Reality and Future Directions10.1161/CIRCRESAHA.117.310275 ↗
14. Structure design and mechanical performance analysis of three kinds of bioresorbable poly-lactic acid (PLA) stents10.1080/10255842.2022.2045485 ↗
15. Design optimizations of PLA stent structure by FEM and investigating its function in a simulated plaque artery10.1016/j.matcom.2019.09.011 ↗
16. Blair, R.W., Dunne, N.J., Lennon, A.B., and Menary, G.H. (2019). Multi-objective optimisation of material properties and strut geometry for poly(L-lactic acid) coronary stents using response surface methodology. PLoS ONE, 14.10.1101/667915 ↗
17. Abaei, A.R., Shine, C.J., Vaughan, T.J., and Ronan, W. (2024). An integrated mechanical degradation model to explore the mechanical response of a bioresorbable polymeric scaffold. J. Mech. Behav. Biomed. Mater., 152.10.1016/j.jmbbm.2024.106419 ↗
18. Structural Design of Mechanical Property for Biodegradable Polymeric Stent10.1155/2019/2960435 ↗
19. Finite element simulation and testing of cobalt-chromium stent: A parametric study on radial strength, recoil, foreshortening, and dogboning10.1080/10255842.2020.1822823 ↗
20. Structural design optimization through finite element analysis of additive manufactured bioresorbable polymeric stents10.1016/j.mtchem.2024.101972 ↗
21. Modeling Degradation Behavior of Biodegradable Polymers for Medical Devices: A Comparative Review of Phenomenological and Stochastic Approaches10.1007/s10924-024-03285-7 ↗
22. He, S.C., Wei, L.L., Wang, G.X., Pugno, N.M., Chen, Q., and Li, Z.Y. (2024). In Silico Evaluation of In Vivo Degradation Kinetics of Poly(Lactic Acid) Vascular Stent Devices. J. Funct. Biomater., 15.10.3390/jfb15050135 ↗
23. Qi, J., Zhang, H., Chen, S., Du, T., Zhang, Y., and Qiao, A. (2023). Numerical Simulation of Dynamic Degradation and Fatigue Damage of Degradable Zinc Alloy Stents. J. Funct. Biomater., 14.10.3390/jfb14110547 ↗
24. Zhang, H., Du, T., Chen, S., Liu, Y., Yang, Y., Hou, Q., and Qiao, A. (2022). Finite Element Analysis of the Non-Uniform Degradation of Biodegradable Vascular Stents. J. Funct. Biomater., 13.10.3390/jfb13030152 ↗
25. The ABSORB bioresorbable vascular scaffold: An evolution or revolution in interventional cardiology?
26. A Computational Study of Mechanical Performance of Bioresorbable Polymeric Stents with Design Variations10.1007/s13239-018-00397-9 ↗
27. A phenomenological model of pulsatile blood pressure-affected degradation of polylactic acid (PLA) vascular stent10.1007/s11517-023-02998-6 ↗
28. Finite element simulation of stent and balloon interaction
29. Mechanical properties of laser cut poly(L-lactide) micro-specimens: Implications for stent design, manufacture, and sterilization10.1115/1.1835349 ↗
30. A Versatile Disorder-to-Order Technology to Upgrade Polymers into High-Performance Bioinspired Materials10.1002/adhm.202300068 ↗
31. Effect of two-year degradation on mechanical interaction between a bioresorbable scaffold and blood vessel10.1016/j.jmbbm.2017.11.031 ↗
32. Novel hybrid 3D-printed auxetic vascular stent based on re-entrant and meta-trichiral unit cells: Finite element simulation with experimental verifications10.1016/j.mtcomm.2023.105742 ↗
33. Antonini, L., Poletti, G., Mandelli, L., Dubini, G., Pennati, G., and Petrini, L. (2021). Comprehensive computational analysis of the crimping procedure of PLLA BVS: Effects of material viscous-plastic and temperature dependent behavior. J. Mech. Behav. Biomed. Mater., 123.10.1016/j.jmbbm.2021.104713 ↗
34. Xie, A., Hao, J., Duan, F., Mitchell, K., Jin, Y., and Zhao, D. (2024). Mechanical analysis of radial performance in biodegradable polymeric vascular stents manufactured using micro-injection molding. J. Mech. Behav. Biomed. Mater., 150.10.1016/j.jmbbm.2023.106362 ↗
35. Computational Analysis of the Utilisation of the Shape Memory Effect and Balloon Expansion in Fully Polymeric Stent Deployment10.1007/s13239-017-0333-y ↗
36. Khalaj Amnieh, S., Mashayekhi, M., Shahnooshi, E., Tavafoghi, M., and Mosaddegh, P. (2021). Biodegradable performance of PLA stents affected by geometrical parameters: The risk of fracture and fragment separation. J. Biomech., 122.10.1016/j.jbiomech.2021.110489 ↗
37. A biodegradable magnesium alloy vascular stent structure: Design, optimisation and evaluation10.1016/j.actbio.2022.01.045 ↗
38. Future Balloon-Expandable Stents: High or Low-Strength Materials?10.1007/s13239-019-00450-1 ↗
39. A comparison of the mechanical performance characteristics of seven drug-eluting stent systems10.1002/ccd.21832 ↗
40. Pan, C., Han, Y., and Lu, J. (2021). Structural Design of Vascular Stents: A Review. Micromachines, 12.10.3390/mi12070770 ↗
41. Conformity of carotid stents with vascular anatomy: Evaluation in carotid models
42. Meta-Analysis of the Impact of Strut Thickness on Outcomes in Patients with Drug-Eluting Stents in a Coronary Artery10.1016/j.amjcard.2018.07.040 ↗
43. Initial findings of impact of strut width on stent coverage and apposition of sirolimus-eluting stents assessed by optical coherence tomography10.1002/ccd.24401 ↗
44. In vitro degradation kinetics of pure PLA and Mg/PLA composite: Effects of immersion temperature and compression stress10.1016/j.actbio.2016.11.001 ↗
45. An Overview of Mechanical Properties and Material Modeling of Polylactide (PLA) for Medical Applications10.1007/s10439-015-1455-8 ↗
46. In situ nanomechanical characterization of the early stages of swelling and degradation of a biodegradable polymer10.1039/C5NR00265F ↗
47. Computational and experimental investigation into mechanical performances of Poly-L-Lactide Acid (PLLA) coronary stents10.1016/j.jmbbm.2016.08.033 ↗
48. Management of in-stent restenosis10.4244/EIJ-D-21-01034 ↗
49. Restenosis: Delineating the numerous causes of drug-eluting stent restenosis10.1161/CIRCINTERVENTIONS.110.959882 ↗
50. Senescent endothelial cells’ response to the degradation of bioresorbable scaffold induces intimal dysfunction accelerating in-stent restenosis10.1016/j.actbio.2023.05.028 ↗
51. Wang, L., Wang, W., Jiang, Y., and Yuan, Y. (2024). Optimizing the compression resistance of low-nickel stainless steel coronary stents using finite element and response surface methodology. J. Biomech., 172.10.1016/j.jbiomech.2024.112227 ↗
52. Ribeiro, N.S., Folgado, J., and Rodrigues, H.C. (2021). Surrogate-based multi-objective design optimization of a coronary stent: Altering geometry towards improved biomechanical performance. Int. J. Numer. Methods Biomed. Eng., 37.10.1002/cnm.3453 ↗
53. Impact of stent strut design in metallic stents and biodegradable scaffolds10.1016/j.ijcard.2014.09.143 ↗