journal article·2024-12-16Open access

Long-Term Dentin Bonding Performance of Universal Adhesives: The Effect of HEMA Content and Bioactive Resin Composite

Di Wu, Ye Yao, Carolina Cecilia Cifuentes-Jimenez, Hidehiko Sano, Pedro Álvarez-Lloret, Monica Yamauti, Atsushi Tomokiyo

Journal of Functional Biomaterials· Volume 15· Issue 12

Abstract

This study investigated the effects of resin composites (RCs) containing surface pre-reacted glass ionomer (S-PRG) filler on the dentin microtensile bond strength (μTBS) of HEMA-free and HEMA-containing universal adhesives (UAs). Water sorption (WS) and solubility (SL), degree of conversion (DC), and ion release were measured. The UAs BeautiBond Xtreme (BBX; 0% HEMA), Modified Adhesive-1 (E-BBX1; 5% HEMA), Modified Adhesive-2 (E-BBX2; 10% HEMA), and two 2-step self-etch adhesives (2-SEAs): FL-BOND II (FBII; with S-PRG filler) and silica-containing adhesive (E-FBII) were used. Teeth were restored with Beautifil Flow Plus F00 with S-PRG filler (BFP) and flowable resin composite with silica filler (E-BFP). μTBS was evaluated after 24 h and 6 months of water storage. WS and SL measurement followed ISO 4049:2019; spectroscopy measured DC; ICP-MS evaluated ion release. BBX and FBII presented the highest DC. The adhesives did not comply with the WS ISO requirements, but the bonding resin of 2-SEAs complied with the SL threshold. BFP released more ions than E-BFP. BFP positively affected the μTBS of UAs, regardless of HEMA concentration after 24 h, comparable to the 2-SEAs. The 6 months μTBS decrease depended on the adhesive and RC combination. HEMA did not affect the μTBS of UAs, while bioactive resins had a positive impact.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Dental materials and restorations · Dental Research and COVID-19 · Endodontics and Root Canal Treatments

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Restorative Dentistry, Graduate School of Dental Medicine, Hokkaido University, Sapporo 060-8586, Japan

Department of Stomatology, Faculty of Dentistry, University of Granada, Campus de Cartuja, s/n, 18011 Granada, Spain

Department of Geology, Faculty of Geology, University of Oviedo, Campus de Llamaquique, s/n, 33005 Oviedo, Spain

Department of Biomedical and Applied Sciences, School of Dentistry, Indiana University Indianapolis, Indianapolis, IN 46202, USA

Funding

Japanese Science and Technology Agency: JST SPRING · Japan Society for the Promotion of Science: JSPS Kakenhi · European Regional Development Fund (ERDF)

References (49)

Show source-provided references
1. From buonocore’s pioneering acid-etch technique to self-adhering restoratives. A status perspective of rapidly advancing dental adhesive technology
2. Adhesive dentistry: Current concepts and clinical considerations10.1111/jerd.12692 ↗
3. Current perspectives on dental adhesion: (1) dentin adhesion—Not there yet10.1016/j.jdsr.2020.08.004 ↗
4. Nine-year clinical performance of a HEMA-free one-step self-etch adhesive in noncarious cervical lesions
5. Dressano, D., Salvador, M.V., Oliveira, M.T., Marchi, G.M., Fronza, B.M., Hadis, M., Palin, W.M., and Lima, A.F. (2020). Chemistry of novel and contemporary resin-based dental adhesives. J. Mech. Behav. Biomed. Mater., 110.10.1016/j.jmbbm.2020.103875 ↗
6. Systematic review of the chemical composition of contemporary dental adhesives10.1016/j.biomaterials.2007.04.044 ↗
7. Distribution of water states within Poly(HEMA-co-HPMA)-based hydrogels10.1016/j.polymer.2019.121978 ↗
8. HEMA inhibits interfacial nano-layering of the functional monomer MDP10.1177/0022034512460396 ↗
9. Multiparameter evaluation of acrylamide HEMA alternative monomers in 2-step adhesives10.1016/j.dental.2020.10.002 ↗
10. Bioactivity of dental restorative materials: FDI policy statement10.1016/j.identj.2022.11.012 ↗
11. Imazato, S., Nakatsuka, T., Kitagawa, H., Sasaki, J.I., Yamaguchi, S., Ito, S., Takeuchi, H., Nomura, R., and Nakano, K. (2023). Multiple-ion releasing bioactive surface pre-reacted glass-ionomer (s-prg) filler: Innovative technology for dental treatment and care. J. Funct. Biomater., 14.10.3390/jfb14040236 ↗
12. Cutting-edge filler technologies to release bio-active components for restorative and preventive dentistry10.4012/dmj.2019-350 ↗
13. Water-associated attributes in the contemporary dentin bonding milieu10.1016/j.jdent.2018.04.016 ↗
14. Evaluation of tooth demineralization and interfacial bacterial penetration around resin composites containing surface pre-reacted glass-ionomer (s-prg) filler10.1016/j.dental.2021.02.009 ↗
15. Influence of spectroscopic techniques on the estimation of the degree of conversion of bulk-fill composites10.2341/18-095-L ↗
16. Bonding performance of experimental HEMA-free two-step universal adhesives to low c-factor flat dentin10.1016/j.dental.2023.04.008 ↗
17. Evaluation of bonding performance and multi-ion release of s-prg fillercontaining self-adhesive resin composite10.4012/dmj.2020-142 ↗
18. Academy of dental materials guidance on in vitro testing of dental composite bonding effectiveness to dentin/enamel using micro-tensile bond strength (μtbs) approach10.1016/j.dental.2016.11.015 ↗
19. Kowalska, A., Sokolowski, J., and Bociong, K. (2021). The photoinitiators used in resin based dental composite—A review and future perspectives. Polymers, 13.10.3390/polym13030470 ↗
20. Effect of inorganic fillers on the light transmission through traditional or flowable resin-matrix composites for restorative dentistry10.1007/s00784-023-05189-7 ↗
21. The effect of different light curing units on vickers microhardness and degree of conversion of flowable resin composites10.4012/dmj.2019-353 ↗
22. Degree of conversion and polymerization shrinkage of bulk-fill resin-based composites10.2341/16-027-L ↗
23. Influence of 2-hydroxyethyl methacrylate concentration on polymer network of adhesive resin
24. Effect of the photo-initiator system contained in universal adhesives on radicular dentin bonding10.2341/19-146-L ↗
25. Zinc-calcium-fluoride bioglass-based innovative multifunctional dental adhesive with thick adhesive resin film thickness10.1021/acsami.0c06865 ↗
26. Nanofilled resin composite properties and clinical performance: A review10.2341/17-208-T ↗
27. Sokolowski, K., Szczesio-Wlodarczyk, A., Bociong, K., Krasowski, M., Fronczek-Wojciechowska, M., Domarecka, M., Sokolowski, J., and Lukomska-Szymanska, M. (2018). Contraction and hydroscopic expansion stress of dental ion-releasing polymeric materials. Polymers, 10.10.3390/polym10101093 ↗
28. Chrószcz-Porębska, M.W., Barszczewska-Rybarek, I.M., and Chladek, G. (2023). Physicochemical properties of novel copolymers of quaternary ammonium udma analogues, bis-gma, and tegdma. Int. J. Mol. Sci., 24.10.3390/ijms24021400 ↗
29. Resin based restorative dental materials: Characteristics and future perspectives10.1016/j.jdsr.2019.09.004 ↗
30. Multi-parameter characterization of hema/bpa-free 1- and 2-step universal adhesives bonded to dentin
31. Color stability of bulk-fill resin composites exposed to caffeinated beverage: An in vitro study
32. Cardoso, R.F.M., Basting, R.T., França, F.M.G., Amaral, F., and Basting, R.T. (2021). Physicochemical characterization, water sorption and solubility of adhesive systems incorporated with titanium tetrafluoride, and its influence on dentin permeability. J. Mech. Behav. Biomed. Mater., 119.10.1016/j.jmbbm.2021.104453 ↗
33. Use of (meth)acrylamides as alternative monomers in dental adhesive systems10.1016/j.dental.2019.02.012 ↗
34. Ubolsa-Ard, P., Sanon, K., Hiraishi, N., Sayed, M., Sakamaki, Y., Yiu, C.K.Y., and Shimada, Y. (2024). Influence of surface pre-reacted glass-ionomer (s-prg) filler eluate on collagen morphology, remineralization, and ultimate tensile strength of demineralized dentin. J. Mech. Behav. Biomed. Mater., 150.10.1016/j.jmbbm.2023.106295 ↗
35. Basic properties of novel s-prg filler-containing cement10.4012/dmj.2019-317 ↗
36. The chemical and optical stability evaluation of injectable restorative materials under wet challenge10.1016/j.jdent.2024.105031 ↗
37. Shear bond strength to enamel, mechanical properties and cellular studies of fiber-reinforced composites modified by depositing SiO2 nanofilms on quartz fibers via atomic layer deposition10.2147/IJN.S446584 ↗
38. Steiner, R., Edelhoff, D., Stawarczyk, B., Dumfahrt, H., and Lente, I. (2019). Effect of dentin bonding agents, various resin composites and curing modes on bond strength to human dentin. Materials, 12.10.3390/ma12203395 ↗
39. Abuljadayel, R., Aljadani, N., Almutairi, H., and Turkistani, A. (2023). Effect of antibacterial agents on dentin bond strength of bioactive restorative materials. Polymers, 15.10.3390/polym15122612 ↗
40. Characteristics of biofilm-induced degradation at resin-dentin interfaces using multiple combinations of adhesives and resins10.1016/j.dental.2021.04.007 ↗
41. Sauro, S., Makeeva, I., Faus-Matoses, V., Foschi, F., Giovarruscio, M., Pires, P.M., Moura, M.E.M., Neves, A.A., and Faus-Llácer, V. (2019). Effects of ions-releasing restorative materials on the dentine bonding longevity of modern universal adhesives after load-cycle and prolonged artificial saliva aging. Materials, 12.10.3390/ma12050722 ↗
42. Dentin bond strengths of all-in-one adhesives combined with different manufacturers’ flowable resin composites10.4012/dmj.2020-373 ↗
43. Effect of the absence of HEMA on the bonding properties of universal adhesive systems containing 10-mdp: An in vitro study10.2341/22-050-L ↗
44. Hardan, L., Bourgi, R., Kharouf, N., Mancino, D., Zarow, M., Jakubowicz, N., Haikel, Y., and Cuevas-Suárez, C.E. (2021). Bond strength of universal adhesives to dentin: A systematic review and meta-analysis. Polymers, 13.10.3390/polym13050814 ↗
45. Quick bonding using a universal adhesive10.1007/s00784-019-03149-8 ↗
46. The role of hema in one-step self-etch adhesives10.1016/j.dental.2008.02.018 ↗
47. The mechanical, wear, antibacterial properties and biocompatibility of injectable restorative materials under wet challenge10.1016/j.jdent.2024.105025 ↗
48. Effect of water aging of adherend composite on repair bond strength of nanofilled composites
49. Degree of conversion contributes to dentin bonding durability of contemporary universal adhesives10.2341/19-165-L ↗