journal article·2023-09-16Open access

Biological Performance of Duplex PEO + CNT/PCL Coating on AZ31B Mg Alloy for Orthopedic and Dental Applications

Morteza Daavari, Masoud Atapour, Marta Mohedano, Endzhe Matykina, Raul Arrabal, Dobrila Nesic

Abstract

To regulate the degradation rate and improve the surface biocompatibility of the AZ31B magnesium alloy, three different coating systems were produced via plasma electrolytic oxidation (PEO): simple PEO, PEO incorporating multi-walled carbon nanotubes (PEO + CNT), and a duplex coating that included a polycaprolactone top layer (PEO + CNT/PCL). Surfaces were characterized by chemical content, roughness, topography, and wettability. Biological properties analysis included cell metabolism and adhesion. PEO ± CNT resulted in an augmented surface roughness compared with the base material (BM), while PCL deposition produced the smoothest surface. All surfaces had a contact angle below 90°. The exposure of gFib-TERT and bmMSC to culture media collected after 3 or 24 h did not affect their metabolism. A decrease in metabolic activity of 9% and 14% for bmMSC and of 14% and 29% for gFib-TERT was observed after 3 and 7 days, respectively. All cells died after 7 days of exposure to BM and after 15 days of exposure to coated surfaces. Saos-2 and gFib-TERT adhered poorly to BM, in contrast to bmMSC. All cells on PEO anchored into the pores with filopodia, exhibited tiny adhesion protrusions on PEO + CNT, and presented a web-like spreading with lamellipodia on PEO + CNT/PCL. The smooth and homogenous surface of the duplex PEO + CNT/PCL coating decreased magnesium corrosion and led to better biological functionality.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Bone Tissue Engineering Materials · Orthopaedic implants and arthroplasty

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Materials Engineering, Isfahan University of Technology, Isfahan 84156-83111, Iran

Departamento de Ingeniería Química y de Materiales, Facultad de Ciencias Químicas, Universidad Complutense, 28040 Madrid, Spain

Division of Fixed Prosthodontics and Biomaterials, University Clinic of Dental Medicine, University of Geneva, Rue Michel-Servet 1, CH-1211 Geneva, Switzerland

Funding

Avicenna Center of Excellence (ACE) · Isfahan Research Network · MCIU/AEI/FEDER · UE · Regional Government of Madrid and EU Structural Funds · Ministerio de Ciencia e Innovación

References (73)

Show source-provided references
1. Review on Titanium and Titanium Based Alloys as Biomaterials for Orthopaedic Applications10.1016/j.msec.2019.04.064 ↗
2. Ti Based Biomaterials, the Ultimate Choice for Orthopaedic Implants—A Review10.1016/j.pmatsci.2008.06.004 ↗
3. Development of New Metallic Alloys for Biomedical Applications10.1016/j.actbio.2012.06.037 ↗
4. Long-Term Implant Fixation and Stress-Shielding in Total Hip Replacement10.1016/j.jbiomech.2014.12.021 ↗
5. The Unfavorable Role of Titanium Particles Released from Dental Implants10.7150/ntno.56401 ↗
6. Biodegradable Magnesium Alloys as Temporary Orthopaedic Implants: A Review10.1007/s10534-019-00170-y ↗
7. Biodegradable Magnesium-based Implants in Orthopedics—A General Review and Perspectives10.1002/advs.201902443 ↗
8. Biodegradable Materials for Bone Defect Repair
9. Current Status on Clinical Applications of Magnesium-Based Orthopaedic Implants: A Review from Clinical Translational Perspective10.1016/j.biomaterials.2016.10.017 ↗
10. Long-Term Clinical Study and Multiscale Analysis of in Vivo Biodegradation Mechanism of Mg Alloy10.1073/pnas.1518238113 ↗
11. Long-Term in Vivo Evolution of High-Purity Mg Screw Degradation—Local and Systemic Effects of Mg Degradation Products10.1016/j.actbio.2018.02.023 ↗
12. Biodegradable Magnesium-based Biomaterials: An Overview of Challenges and Opportunities10.1002/mco2.59 ↗
13. Preparation of a Single-Phase Mg–6Zn Alloy via ECAP-Stimulated Solution Treatment10.1016/j.jma.2019.02.006 ↗
14. Advances in Coatings on Biodegradable Magnesium Alloys10.1016/j.jma.2019.09.008 ↗
15. Surface Modification and Cytotoxicity of Mg-Based Bio-Alloys: An Overview of Recent Advances10.1016/j.jallcom.2020.154140 ↗
16. Research Progress on Surface Protective Coatings of Biomedical Degradable Magnesium Alloys10.1016/j.jallcom.2021.161001 ↗
17. Enhanced Corrosion Resistance and Biocompatibility of Magnesium Alloy by Mg–Al-Layered Double Hydroxide10.1021/acsami.6b12974 ↗
18. Antibacterial Properties, Hemolysis and Biocompatibility of Biodegradable Medical Magnesium Alloys
19. Coatings on Mg Alloys and Their Mechanical Properties: A Review10.1016/j.jmst.2017.12.004 ↗
20. Biodegradable Magnesium Alloys for Orthopaedic Applications: A Review on Corrosion, Biocompatibility and Surface Modifications10.1016/j.msec.2016.06.020 ↗
21. PEO/Polymer Hybrid Coatings on Magnesium Alloy to Improve Biodegradation and Biocompatibility Properties10.1016/j.surfin.2022.102495 ↗
22. Functionalization Treatment of Micro-Arc Oxidation Coatings on Magnesium Alloys: A Review10.1016/j.jallcom.2021.160453 ↗
23. The Effect of PEO Parameters on the Properties of Biodegradable Mg Alloys: A Review10.1680/jsuin.20.00057 ↗
24. Structure and Properties of ZrO2 Ceramic Coatings on AZ91D Mg Alloy by Plasma Electrolytic Oxidation10.1111/j.1551-2916.2007.02155.x ↗
25. Effects of the Sources of Calcium and Phosphorus on the Structural and Functional Properties of Ceramic Coatings on Titanium Dental Implants Produced by Plasma Electrolytic Oxidation10.1016/j.msec.2020.111607 ↗
26. Jiang, P., Blawert, C., and Zheludkevich, M.L. (2020). The Corrosion Performance and Mechanical Properties of Mg-Zn Based Alloys—A Review. Corros. Mater. Degrad., 1.10.3390/cmd1020007 ↗
27. Sikdar, S., Menezes, P.V., Maccione, R., Jacob, T., and Menezes, P.L. (2021). Plasma Electrolytic Oxidation (PEO) Process—Processing, Properties, and Applications. Nanomaterials, 11.10.3390/nano11061375 ↗
28. The Incorporation of Particles Suspended in the Electrolyte into Plasma Electrolytic Oxidation Coatings on Ti and Al Substrates10.1016/j.surfcoat.2020.125354 ↗
29. Plasma Electrolytic Oxidation Coatings with Particle Additions–A Review10.1016/j.surfcoat.2016.08.055 ↗
30. Role of Incorporation of ZnO Nanoparticles on Corrosion Behavior of Ceramic Coatings Developed on AZ31 Magnesium Alloy by Plasma Electrolytic Oxidation Technique10.1016/j.surfin.2020.100728 ↗
31. Preparation and Corrosion Resistance of a Self-Sealing Hydroxyapatite-MgO Coating on Magnesium Alloy by Microarc Oxidation10.1016/j.ceramint.2022.01.249 ↗
32. Fabrication of Ag Containing Antibacterial PEO Coatings on Pure Mg10.1016/j.matlet.2021.129731 ↗
33. The Functionalization of Multi-Walled Carbon Nanotubes by in Situ Deposition of Hydroxyapatite10.1016/j.biomaterials.2010.03.012 ↗
34. Carbon Nanotube Nanoreservior for Controlled Release of Anti-Inflammatory Dexamethasone10.1016/j.biomaterials.2011.05.020 ↗
35. Biotribology and Biocorrosion of MWCNTs-Reinforced PEO Coating on AZ31B Mg Alloy10.1016/j.surfin.2020.100850 ↗
36. Gnedenkov, A.S., Sinebryukhov, S.L., Filonina, V.S., Ustinov, A.Y., Sukhoverkhov, S.V., and Gnedenkov, S.V. (2022). New Polycaprolactone-Containing Self-Healing Coating Design for Enhance Corrosion Resistance of the Magnesium and Its Alloys. Polymers, 15.10.3390/polym15010202 ↗
37. Moreno, L., Wang, C., Lamaka, S.V., Zheludkevich, M.L., Rodríguez-Hernández, J., Arrabal, R., and Matykina, E. (2023). Ciprofloxacin Release and Corrosion Behaviour of a Hybrid PEO/PCL Coating on Mg3Zn0.4Ca Alloy. J. Funct. Biomater., 14.10.3390/jfb14020065 ↗
38. Gnedenkov, A.S., Sinebryukhov, S.L., Filonina, V.S., Ustinov, A.Y., and Gnedenkov, S. (2023). V Hybrid Coatings for Active Protection against Corrosion of Mg and Its Alloys. Polymers, 15.10.3390/polym15143035 ↗
39. Synthesis, Properties and Biomedical Applications of Poly (Glycerol Sebacate) (PGS): A Review10.1016/j.progpolymsci.2012.02.001 ↗
40. Biodegradable and Elastomeric Poly (Glycerol Sebacate) as a Coating Material for Nitinol Bare Stent
41. Poly (Caprolactone)-Based Coatings on 3D-Printed Biodegradable Implants: A Novel Strategy to Prolong Delivery of Hydrophilic Drugs10.1021/acs.molpharmaceut.0c00515 ↗
42. Polycaprolactone as Biomaterial for Bone Scaffolds: Review of Literature10.1016/j.jobcr.2019.10.003 ↗
43. Fabrication and Characterization of Porous Polycaprolactone Scaffold via Extrusion-Based Cryogenic 3D Printing for Tissue Engineering10.1016/j.matdes.2019.107946 ↗
44. 3D Printed PCL/SrHA Scaffold for Enhanced Bone Regeneration10.1016/j.cej.2019.01.015 ↗
45. Fabrication Techniques Involved in Developing the Composite Scaffolds PCL/HA Nanoparticles for Bone Tissue Engineering Applications10.1007/s10856-021-06564-0 ↗
46. Quasi-in Vivo Corrosion Behavior of AZ31B Mg Alloy with Hybrid MWCNTs-PEO/PCL Based Coatings10.1016/j.jma.2021.09.010 ↗
47. Cellular Metabolism: A Link Connecting with Physiochemical Properties of Biomaterials for Bone Tissue Engineering10.1039/D2BM01410F ↗
48. What Affects the Biocompatibility of Polymers?10.1016/j.cis.2021.102451 ↗
49. Zeng, R.-C., Yin, Z.-Z., Chen, X.-B., and Xu, D.-K. (2018). Magnesium Alloys: Selected Issue, Books on Demand GmbH.
50. Improvement of Osteogenesis by a Uniform PCL Coating on a Magnesium Screw for Biodegradable Applications10.1038/s41598-018-31359-9 ↗
51. Effect of Microtopography on Osseointegration of Implantable Biomaterials and Its Modification Strategies10.3389/fbioe.2022.981062 ↗
52. Carbon Nanostructure-Based Superhydrophobic Surfaces and Coatings10.1515/ntrev-2021-0039 ↗
53. Surface Charge Regulation of Osteogenic Differentiation of Mesenchymal Stem Cell on Polarized Ferroelectric Crystal Substrate10.1002/adhm.201500032 ↗
54. Chemical and Physical Properties of Regenerative Medicine Materials Controlling Stem Cell Fate10.3109/07853890.2011.573805 ↗
55. Cell Interactions with Superhydrophilic and Superhydrophobic Surfaces10.1080/01694243.2012.697776 ↗
56. What Is Really Driving Cell–Surface Interactions? Layer-by-Layer Assembled Films May Help to Answer Questions Concerning Cell Attachment and Response to Biomaterials10.1116/1.4943046 ↗
57. Husak, Y., Michalska, J., Oleshko, O., Korniienko, V., Grundsteins, K., Dryhval, B., Altundal, S., Mishchenko, O., Viter, R., and Pogorielov, M. (2021). Bioactivity Performance of Pure Mg after Plasma Electrolytic Oxidation in Silicate-Based Solutions. Molecules, 26.10.3390/molecules26072094 ↗
58. Effects and Degradable Mg-Nd-Zn-Zr Alloy on Osteoblastic Cell Function10.1177/039463201202500306 ↗
59. A Self-Healing and Bioactive Coating Based on Duplex Plasma Electrolytic Oxidation/Polydopamine on AZ91 Alloy for Bone Implants10.1016/j.jma.2022.05.020 ↗
60. Corrosion Behavior and Cytocompatibility of Fluoride-Incorporated Plasma Electrolytic Oxidation Coating on Biodegradable AZ31 Alloy10.1093/rb/rbw036 ↗
61. A Review of Cell Adhesion Studies for Biomedical and Biological Applications10.3390/ijms160818149 ↗
62. Substrate Topography Induces a Crossover from 2D to 3D Behavior in Fibroblast Migration10.1016/j.bpj.2009.04.024 ↗
63. Tuning Cell Adhesion by Controlling the Roughness and Wettability of 3D Micro/Nano Silicon Structures10.1016/j.actbio.2010.01.016 ↗
64. Effect of Ceramic Scaffold Architectural Parameters on Biological Response10.3389/fbioe.2015.00151 ↗
65. Adhesion of Human Osteoblast-like Cells (Saos-2) to Carbon Nanotube Sheets
66. Cell Attachment and Spreading on Carbon Nanotubes Is Facilitated by Integrin Binding10.3389/fbioe.2018.00129 ↗
67. Xu, J., Hu, X., Jiang, S., Wang, Y., Parungao, R., Zheng, S., Nie, Y., Liu, T., and Song, K. (2019). The Application of Multi-Walled Carbon Nanotubes in Bone Tissue Repair Hybrid Scaffolds and the Effect on Cell Growth in Vitro. Polymers, 11.10.3390/polym11020230 ↗
68. Preparation and Characterization of Forsterite (Mg2SiO4) Bioceramics10.1016/j.ceramint.2005.07.021 ↗
69. Biofunctional Composite Coating Architectures Based on Polycaprolactone and Nanohydroxyapatite for Controlled Corrosion Activity and Enhanced Biocompatibility of Magnesium AZ31 Alloy10.1016/j.msec.2014.12.027 ↗
70. Human Gingival Fibroblast Proliferation on Materials Used for Dental Implant Abutments: A Systematic Review10.11607/ijp.7388 ↗
71. Oral Implant Surfaces: Part 1--Review Focusing on Topographic and Chemical Properties of Different Surfaces and in Vivo Responses to Them
72. Surface Properties Correlated with the Human Gingival Fibroblasts Attachment on Various Materials for Implant Abutments: A Multiple Regression Analysis10.3109/00016357.2014.949845 ↗
73. The Influence of Surface Topography of Ceramic Abutments on the Attachment and Proliferation of Human Oral Fibroblasts10.1016/j.biomaterials.2004.02.037 ↗