journal article·2025-09-12Open access

Antibacterial Activity of a Trace-Cu-Modified Mg Alloy in Simulated Intestinal Fluid

Baiyun Zhong, Zemeng Wei, Yi Yao, Lixun Jiang, Manli Zhou, Jinping Li, Weidong Liu, Xin Li, Ming-Chun Zhao

Abstract

Mg alloys hold promise for biodegradable gastrointestinal implants, but most evaluations rely on simplified media like Hank’s solution, which lacks organic components and fails to replicate the acidic-to-alkaline transition of intestinal fluid, risking underestimation of biodegradation rates and clinical relevance. This work investigated a trace-Cu-modified Mg alloy (Mg-0.05Cu) in simulated intestinal fluid (SIF) versus Hank’s solution. Microstructural analysis confirmed Mg2Cu intermetallic phases as Cu reservoirs. Electrochemical and immersion tests revealed significantly accelerated biodegradation in SIF, due to its disruption of protective layer formation, sustaining loose biodegradation products. The biodegradation rate of the trace-Cu-modified Mg alloy in SIF was consistent with reported values for Mg alloys in similar media, as was that in Hank’s solution. Remarkably, Mg-0.05Cu exhibited potent antibacterial activity against E. coli, achieving 99.3% eradication within 12 h and 100% elimination by 24–48 h, alongside excellent cytocompatibility with L929 cells (>95% viability). This efficacy arose from the synergistic Cu2+ release and high-pH microenvironment. These findings demonstrate that trace Cu alloying in high-purity Mg balances rapid antibacterial action with controlled biodegradation in a physiologically relevant SIF. This positions Mg-0.05Cu as a highly promising candidate for practical applications, such as biodegradable intestinal stents, anti-adhesion barriers, anastomosis rings, and anti-obesity devices, where rapid infection control and predictable degradation are critical for clinical success. This work underscores the importance of using biomimetic media for evaluating gastrointestinal implants and establishes Mg-0.05Cu as a promising strategy for developing infection-resistant biodegradable devices.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Nanomaterials for catalytic reactions · Contemporary Christian Leadership and Education · Magnesium Alloys: Properties and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Clinical Laboratory, Xiangya Hospital, Central South University, Changsha 410008, China

National Clinical Research Center for Geriatric Disorders, Xiangya Hospital, Central South University, Changsha 410008, China

Department of General Surgery, Xiangya Hospital, Central South University, Changsha 410008, China

Department of Gastroenterology, First Medical Center, PLA General Hospital, Beijing 100036, China

School of Materials Science and Engineering, Central South University, Changsha 410083, China

Funding

Natural Science Foundation of Shandong Province

References (40)

Show source-provided references
1. The mechanical property and corrosion resistance of Mg-Zn-Nd alloy fine wires in vitro and in vivo
2. The design, development, and in vivo performance of intestinal anastomosis ring fabricated by magnesium-zinc-strontium alloy10.1016/j.msec.2019.110158 ↗
3. Intraluminal pH of the human gastrointestinal tract
4. Whole model path planning-guided multi-axis and multi-material printing of high-performance intestinal implantable stent10.1002/adhm.202301313 ↗
5. Microbial corrosion of 316L stainless steel stents by gut Lactobacillus plantarum via extracellular electron transfer10.1016/j.jmst.2025.05.008 ↗
6. Modifying NiTi shape memory alloys to reduce nickel ions release through ethylenediamine plasma polymerization for biomedical applications10.1016/j.porgcoat.2023.108158 ↗
7. Yan, J., Chen, Y.G., Yuan, Q.L., Wang, X.H., Yu, S., Qiu, W.C., Wang, Z.G., Ai, K.X., Zhang, X.N., and Zhang, S.X. (2014). Comparison of the effects of Mg–6Zn and Ti–3Al–2.5V alloys on TGF-β/TNF-α/VEGF/b-FGF in the healing of the intestinal tract in vivo. Bioact. Mater., 9.10.1088/1748-6041/9/2/025011 ↗
8. A short review of medical-grade stainless steel: Corrosion resistance and novel techniques10.1016/j.jmrt.2024.01.240 ↗
9. Recent advances in bio-functional Ta-based bone materials: Materials design and bioactivity10.1088/2631-7990/ad7b03 ↗
10. Ivanescu, M.C., Munteanu, C., Cimpoesu, R., Istrate, B., Lupu, F.C., Benchea, M., Sindilar, E.V., Vlasa, A., Stamatin, O., and Zegan, G. (2025). The influence of Ca on mechanical properties of the Mg-Ca-Zn-RE-Zr alloy for orthopedic applications. J. Funct. Biomater., 16.10.3390/jfb16050170 ↗
11. Enhanced Mechanical Properties, Corrosion Resistance, Cytocompatibility, Osteogenesis, and Antibacterial Performance of Biodegradable Mg–2Zn–0.5Ca–0.5Sr/Zr Alloys for Bone-Implant Application10.1002/adhm.202303975 ↗
12. A state-of-the-art review on recent advances in the fabrication and characteristics of magnesium-based alloys in biomedical applications10.1016/j.jma.2024.06.015 ↗
13. The effect of enzymes on the in vitro degradation behavior of Mg alloy wires in simulated gastric fluid and intestinal fluid
14. Bone regeneration and antibacterial properties of calcium-phosphorus coatings induced by gentamicin-loaded polydopamine on magnesium alloys10.1016/j.bmt.2023.06.002 ↗
15. Susceptibility of metallic magnesium implants to bacterial biofilm infections10.1002/jbm.a.35680 ↗
16. Biodegradable Mg-Cu alloy implants with antibacterial activity for the treatment of osteomyelitis: In vitro and in vivo evaluations10.1016/j.biomaterials.2016.08.031 ↗
17. Biodegradation, Antibacterial Performance, and Cytocompatibility of a Novel ZK30-Cu-Mn Biomedical Alloy Produced by Selective Laser Melting
18. Zhao, X., Wan, P., Wang, H., Zhang, S., Liu, J., Chang, C., Yang, K., Pan, Y., and Lerner, H. (2020). An Antibacterial Strategy of Mg-Cu Bone Grafting in Infection-Mediated Periodontics. BioMed. Res. Int., 2020.10.1155/2020/7289208 ↗
19. Influence of hybrid extrusion and solution treatment on the microstructure and degradation behavior of Mg-0.1Cu alloy10.1016/j.mseb.2017.12.033 ↗
20. Improvement of biodegradable and antibacterial properties by solution treatment and micro-arc oxidation (MAO) of a magnesium alloy with a trace of copper10.1016/j.corsci.2019.05.015 ↗
21. The structure of liquid Mg–Cu binary alloys10.1016/j.jnoncrysol.2010.05.064 ↗
22. Strengthening and improvement of ductility without loss of corrosion performance in a magnesium alloy by homogenizing annealing10.1016/j.scriptamat.2007.11.023 ↗
23. Microwave-Sintered Nano-SiC Reinforced 8SiC/Ti-3Cu Composite: Fabrication, Wear Resistance, Antibacterial Function, and Biocompatibility10.1002/adhm.202403626 ↗
24. Degradation of AZ31 and AZ91 magnesium alloys in different physiological media: Effect of surface layer stability on electrochemical behaviour10.1016/j.jma.2020.02.014 ↗
25. Electrochemical investigations on the corrosion behaviour of magnesium alloy ZE41 in a combined medium of chloride and sulphate10.1016/j.jma.2013.08.003 ↗
26. Comparison of the biodegradation of ZK30 subjected to solid solution treating and selective laser melting10.1016/j.jmrt.2020.12.041 ↗
27. A biodegradable magnesium surgical staple for colonic anastomosis: In vitro and in vivo evaluation
28. Controllable degradation behavior of Mg-Sr-Y alloys for the bio-applications10.1038/s41529-023-00366-1 ↗
29. Corrosion of high purity Mg, Mg2Zn0.2Mn, ZE41 and AZ91 in Hank’s solution at 37 °C10.1016/j.corsci.2011.06.030 ↗
30. Degradation behaviors of surface modified magnesium alloy wires in different simulated physiological environments10.1007/s11706-014-0257-5 ↗
31. Selective laser melted Fe-30Mn-6Cu alloy: A multifunctional candidate for MRI-compatible, biodegradable, antibacterial, and biocompatible orthopedic implants
32. Unprecedented laser metal deposition (LMD) biofabrication of nano-ZrO2 reinforced structure-function-integrated Ti–Cu composite: Fabrication, wear, biofunctionality10.1016/j.compositesb.2025.112379 ↗
33. Copper as an antimicrobial agent: Recent advances10.1039/D1RA02149D ↗
34. Copper release and ROS in antibacterial activity of Ti-Cu alloys against implant-associated infection10.1007/s12598-022-02242-4 ↗
35. Alkaline pH homeostasis in bacteria: New insights10.1016/j.bbamem.2005.09.010 ↗
36. Huzum, R.M., Huzum, B., Hînganu, M.V., Lozneanu, L., Lupu, F.C., and Hînganu, D. (2025). Immunohistochemical and Ultrastructural Study of the Degenerative Processes of the Hip Joint Capsule and Acetabular Labrum. Diagnostics, 15.10.3390/diagnostics15151932 ↗
37. A link between pH homeostasis and colistin resistance in bacteria10.1038/s41598-021-92718-7 ↗
38. Effect of local alkaline microenvironment on the behaviors of bacteria and osteogenic cells10.1021/acsami.8b15724 ↗
39. Cytoplasmic pH Measurement and Homeostasis in Bacteria and Archaea10.1016/S0065-2911(09)05501-5 ↗
40. Molecular aspects of bacterial pH sensing and homeostasis10.1038/nrmicro2549 ↗