In Vivo Cell Migration and Growth Within Electrospun Porous Nanofibrous Scaffolds with Different Pore Sizes in a Mouse Pouch Model
Source abstract
Abstract
Cellular infiltration into traditional electrospun nanofibers (NFs) is limited due to their dense structures. We were able to obtain polycaprolactone (PCL) NFs with variable and defined pore sizes and thicknesses by using a customized programmed NF collector that controls the moving speed during electrospinning. NFs obtained by this method were tested in vitro and have shown better cell proliferation within the NFs with larger pore sizes. This study investigated in vivo host cell migration and neovascularization within implanted porous PCL NF discs using a mouse pouch model. Four types of PCL NFs were prepared and classified based on the electrospinning speed: NF-zero (static control), NF-low (0.085 mm/min), NF-mid (0.158 mm/min) and NF-high (0.232 mm/min) groups. With the increase in the speed, we observed an increase in the pore area; NF-zero (11.6 ± 6.2 μm2), NF-low (37.4 ± 28.6 μm2), NF-mid (67.6 ± 54.8 μm2), and NF-high (292.3 ± 286.5 μm2) groups. The NFs were implanted into air pouches of BALB/cJ mice. Mice without NFs served as control. Animals were sacrificed at 7 and 28 days after the implantation. Pouch tissues with implanted NFs were collected for histology (n = three per group and time point). The efficiency of the tissue penetration into PCL NF sheets was closely linked to the pore size and area. NFs with the highest pore area had more efficient tissue migration and new blood vessel formation compared to those with a smaller pore area. No newly formed blood vessels were observed in NF-zero sheets up to 28 days. We believe that a porous NF scaffold with a controllable pore size and thickness has great potential for tissue repair/regeneration and for other healthcare applications.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Electrospun Nanofibers in Biomedical Applications · Tissue Engineering and Regenerative Medicine · Bone Tissue Engineering Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Orthopedics, Henry Ford Providence Southfield Hospital, Southfield, MI 48075, USA
Department of Biomedical Engineering, Wayne State University, Detroit, MI 48201, USA
The Core Institute, Novi, MI 48374, USA
Department of Orthopedics, 6th People’s Hospital, School of Medicine, Shanghai Jiao Tong University, Shanghai 200233, China
Virotech Co., Inc., Troy, MI 48085, USA
References (61)
Show source-provided references
1. Organic–inorganic surface modifications for titanium implant surfaces10.1007/s11095-008-9617-0 ↗
2. New directions in nanofibrous scaffolds for soft tissue engineering and regeneration10.1586/erd.09.39 ↗
3. Biomimetic nanofibrous scaffolds for bone tissue engineering10.1016/j.biomaterials.2011.09.009 ↗
4. Electrospinning fibrous polymer scaffolds for tissue engineering and cell culture
5. Skotak, M., Ragusa, J., Gonzalez, D., and Subramanian, A. (2011). Improved cellular infiltration into nanofibrous electrospun cross-linked gelatin scaffolds templated with micrometer-sized polyethylene glycol fibers. Biomed. Mater., 6.10.1088/1748-6041/6/5/055012 ↗
6. Fabrication of aligned, porous and conductive fibers and their effects on cell adhesion and guidance10.1016/j.colsurfb.2015.07.028 ↗
7. Porosity of 3D biomaterial scaffolds and osteogenesis10.1016/j.biomaterials.2005.02.002 ↗
8. Nano-fibrous scaffolding architecture selectively enhances protein adsorption contributing to cell attachment10.1002/jbm.a.10098 ↗
9. Effect of fiber diameter, pore size and seeding method on growth of human dermal fibroblasts in electrospun poly (ε-caprolactone) fibrous mats10.1016/j.biomaterials.2009.09.072 ↗
10. Design and fabrication of a dual protein-based trilayered nanofibrous scaffold for efficient wound healing10.1021/acsabm.2c00200 ↗
11. Cell infiltration and growth in a low density, uncompressed three-dimensional electrospun nanofibrous scaffold10.1016/j.biomaterials.2010.10.056 ↗
12. Schofer, M.D., Roessler, P.P., Schaefer, J., Theisen, C., Schlimme, S., Heverhagen, J.T., Voelker, M., Dersch, R., Agarwal, S., and Fuchs-Winkelmann, S. (2011). Electrospun PLLA nanofiber scaffolds and their use in combination with BMP-2 for reconstruction of bone defects. PLoS ONE, 6.10.1371/journal.pone.0025462 ↗
13. Sundaramurthi, D., Vasanthan, K.S., Kuppan, P., Krishnan, U.M., and Sethuraman, S. (2012). Electrospun nanostructured chitosan–poly (vinyl alcohol) scaffolds: A biomimetic extracellular matrix as dermal substitute. Biomed. Mater., 8.10.1088/1748-6041/7/4/045005 ↗
14. Electrospun nanofibres in drug delivery: Advances in controlled release strategies10.1039/D2RA06023J ↗
15. Agarwal, A., Rao, G.K., Majumder, S., Shandilya, M., Rawat, V., Purwar, R., Verma, M., and Srivastava, C.M. (2022). Natural protein-based electrospun nanofibers for advanced healthcare applications: Progress and challenges. 3 Biotech, 12.10.1007/s13205-022-03152-z ↗
16. Tranexamic acid-loaded chitosan electrospun nanofibers as drug delivery system for hemorrhage control applications10.1016/j.jddst.2019.05.018 ↗
17. Generation of electrospun nanofibers with controllable degrees of crimping through a simple, plasticizer-based treatment10.1002/adma.201500329 ↗
18. Alignment of multiple glial cell populations in 3D nanofiber scaffolds: Toward the development of multicellular implantable scaffolds for repair of neural injury10.1016/j.nano.2013.09.001 ↗
19. Designed hybrid scaffolds consisting of polycaprolactone microstrands and electrospun collagen-nanofibers for bone tissue regeneration10.1002/jbm.b.31809 ↗
20. Technological advances in electrospinning of nanofibers10.1088/1468-6996/12/1/013002 ↗
21. The potential to improve cell infiltration in composite fiber-aligned electrospun scaffolds by the selective removal of sacrificial fibers10.1016/j.biomaterials.2008.01.032 ↗
22. Increasing the pore sizes of bone-mimetic electrospun scaffolds comprised of polycaprolactone, collagen I and hydroxyapatite to enhance cell infiltration10.1016/j.biomaterials.2011.09.080 ↗
23. Improved cellular infiltration in electrospun fiber via engineered porosity10.1089/ten.2006.0306 ↗
24. Ultraporous 3D polymer meshes by low-temperature electrospinning: Use of ice crystals as a removable void template10.1002/pen.20914 ↗
25. Electrospun fibrous scaffolds with multiscale and photopatterned porosity10.1002/mabi.200900363 ↗
26. Novel wet electrospinning system for fabrication of spongiform nanofiber 3-dimensional fabric10.1016/j.matlet.2008.12.042 ↗
27. A review on electrospinning design and nanofibre assemblies10.1088/0957-4484/17/14/R01 ↗
28. Production of poly (vinylalcohol) nanoyarns using a special saw-like collector
29. Electrospun poly (ε-caprolactone) microfiber and multilayer nanofiber/microfiber scaffolds: Characterization of scaffolds and measurement of cellular infiltration10.1021/bm060680j ↗
30. Chitosan nano-/microfibrous double-layered membrane with rolled-up three-dimensional structures for chondrocyte cultivation10.1002/jbm.a.32109 ↗
31. Electrospinning of highly porous scaffolds for cartilage regeneration10.1021/bm701225a ↗
32. Continuous yarns from electrospun fibers10.1016/j.polymer.2005.02.002 ↗
33. Corona discharge: A novel approach to fabricate three-dimensional electrospun nanofibers for bone tissue engineering10.1021/acsbiomaterials.7b00061 ↗
34. A review on polymer nanofibers by electrospinning and their applications in nanocomposites10.1016/S0266-3538(03)00178-7 ↗
35. ASTM international workshop on standards and measurements for tissue engineering scaffolds10.1002/jbm.b.33286 ↗
36. Preparation of electrospun nanofibers with desired microstructures using a programmed three-dimensional (3D) nanofiber collector10.1016/j.msec.2019.110188 ↗
37. Song, W., Yu, X., Markel, D.C., Shi, T., and Ren, W. (2013). Coaxial PCL/PVA electrospun nanofibers: Osseointegration enhancer and controlled drug release device. Biofabrication, 5.10.1088/1758-5082/5/3/035006 ↗
38. Immunological response to bolus versus multiple injections of hylan G-F 20 in a murine biocompatibility model10.1002/jbm.b.33116 ↗
39. PCL-based composite scaffold matrices for tissue engineering applications10.1007/s12033-018-0084-5 ↗
40. Electrospun materials as potential platforms for bone tissue engineering10.1016/j.addr.2009.07.008 ↗
41. Design, fabrication and characterization of PCL electrospun scaffolds—A review10.1039/c0jm04502k ↗
42. Elastic three-dimensional poly (ε-caprolactone) nanofibre scaffold enhances migration, proliferation and osteogenic differentiation of mesenchymal stem cells10.1111/cpr.12001 ↗
43. In vitro cell infiltration and in vivo cell infiltration and vascularization in a fibrous, highly porous poly (d, l-lactide) scaffold fabricated by cryogenic electrospinning technique10.1002/jbm.a.32208 ↗
44. Development of artificial dermis using 3D electrospun silk fibroin nanofiber matrix10.1166/jbn.2014.1818 ↗
45. Design, fabrication, and optimization of a dual function three-layer scaffold for controlled release of metformin hydrochloride to alleviate fibrosis and accelerate wound healing10.1016/j.actbio.2020.06.031 ↗
46. The topography of electrospun nanofibers and its impact on the growth and mobility of keratinocytes10.1016/j.ejpb.2012.09.009 ↗
47. Scaffolds and cells for tissue regeneration: Different scaffold pore sizes—Different cell effects
48. A review on pore and porosity in tissue engineering10.1016/j.matpr.2020.12.661 ↗
49. Persson, M., Lehenkari, P.P., Berglin, L., Turunen, S., Finnilä, M.A., Risteli, J., Skrifvars, M., and Tuukkanen, J. (2018). Osteogenic differentiation of human mesenchymal stem cells in a 3D woven scaffold. Sci. Rep., 7.10.1038/s41598-018-28699-x ↗
50. The formation of a structure with the features of synovial lining by subcutaneous injection of air: An in vivo tissue culture system10.1002/path.1711340205 ↗
51. Distinct gene expression of receptor activator of nuclear factor-κB and rank ligand in the inflammatory response to variant morphologies of UHMWPE particles10.1016/S0142-9612(03)00384-3 ↗
52. Effect of erythromycin-doped calcium polyphosphate scaffold composite in a mouse pouch infection model10.1002/jbm.b.33095 ↗
53. Blockade of vascular endothelial growth factor activity suppresses wear debris-induced inflammatory osteolysis
54. Electrospun PCL-PIBMD/SF blend scaffolds with plasmid complexes for endothelial cell proliferation10.1039/C7RA06253B ↗
55. Preparation and in vivo efficient anti-infection property of GTR/GBR implant made by metronidazole loaded electrospun polycaprolactone nanofiber membrane10.1016/j.ijpharm.2014.09.026 ↗
56. Controlling fibrous capsule formation through long-term down-regulation of collagen type I (COL1A1) expression by nanofiber-mediated siRNA gene silencing10.1016/j.actbio.2012.09.029 ↗
57. Cell infiltrative hydrogel fibrous scaffolds for accelerated wound healing10.1016/j.actbio.2016.11.017 ↗
58. Expanded 3D nanofiber scaffolds: Cell penetration, neovascularization, and host response10.1002/adhm.201600808 ↗
59. CO2—Expanded nanofiber scaffolds maintain activity of encapsulated bioactive materials and promote cellular infiltration and positive host response10.1016/j.actbio.2017.12.018 ↗
60. Cell infiltration and vascularization in porous nanoyarn scaffolds prepared by dynamic liquid electrospinning10.1166/jbn.2014.1733 ↗
61. Three-dimensional vascularization of electrospun PCL/collagen-blend nanofibrous scaffolds in vivo10.1002/jbm.a.34172 ↗