Metal Ion Release from PEO-Coated Ti6Al4V DMLS Alloy for Orthopedic Implants
Source abstract
Abstract
This study investigates the influence of plasma electrolytic oxidation (PEO) on corrosion resistance of Ti6Al4V alloys produced by direct metal laser sintering (DMLS) for orthopedic implants. PEO (300 s) and flash-PEO (60 s) coatings containing Si, Ca, P, Mg and Zn were applied on both DMLS and wrought Ti6Al4V alloys. Samples, coated and uncoated, were characterized for microstructure, morphology and composition. Electrochemical behaviour was assessed by potentiodynamic polarization (PDP) and electrochemical impedance spectroscopy (EIS) in simulated body fluid (SBF) at 37 °C. Ion release was quantified by inductively coupled plasma optical emission spectroscopy (ICP-OES). DMLS alloy was more passive than wrought Ti6Al4V, releasing ~60% less Ti and ~25% less Al, but ~900% more V. For both alloys, correlation of corrosion current and ion release indicated that 98–99% of oxidized Ti remained in the passive layer. Flash-PEO produced uniform porous coatings composed of anatase and rutile with ~50% amorphous phase, while PEO yielded heterogeneous layers due to soft sparking. In both cases, coatings were the main source of ions. For the DMLS alloy, the best protection was afforded by flash-PEO, releasing 0.01 μg cm−2 d−1 Ti, 26 μg cm−2 d−1 Al, and 0.25 μg cm−2 d−1 V over 30 days.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Titanium Alloys Microstructure and Properties · Orthopaedic implants and arthroplasty
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Departamento de Ingeniería Química y de Materiales, Facultad de Ciencias Químicas, Universidad Complutense de Madrid, 28040 Madrid, Spain
Unidad Asociada al ICTP, IQM (CSIC), Grupo de Síntesis Orgánica y Bioevaluación, Instituto Pluridisciplinar (UCM), Paseo de Juan XXIII 1, 28040 Madrid, Spain
Funding
MICIU/AEI, Spain and FEDER, EU · MICIU/AEI, Spain · Regional Government of Madrid, Spain
References (48)
Show source-provided references
1. Material characterization of Ti6Al4V alloy additively manufactured using selective laser melting technique10.1016/j.jmrt.2024.09.164 ↗
2. Additive manufacturing of titanium-based alloys-A review of methods, properties, challenges, and prospects10.1016/j.heliyon.2022.e09041 ↗
3. Design of titanium alloys by additive manufacturing: A critical review10.1016/j.apmate.2021.11.001 ↗
4. Research status of laser additive manufacturing for metal: A review10.1016/j.jmrt.2021.08.050 ↗
5. Flash plasma electrolytic oxidation and electrochemical behaviour in physiological media of additive manufacturing Ti6Al4V alloy10.1016/S1003-6326(23)66460-X ↗
6. Villapún, V.M., Carter, L.N., and Cox, S.C. (2025). Plasma-electrolytic oxidation: A rapid single step post processing approach for additively manufactured biomedical implants. Biomater. Adv., 169.10.1016/j.bioadv.2025.214186 ↗
7. Fabrication of the nanoparticle incorporated PEO coating on commercially pure zirconium and its corrosion resistance10.1016/j.surfcoat.2016.07.086 ↗
8. Comprehensive review of PEO coatings on titanium alloys for biomedical implants10.1016/j.jmrt.2024.06.068 ↗
9. The effects of nano- and micro-particles on properties of plasma electrolytic oxidation (PEO) coatings applied on titanium substrates: A review10.1016/j.surfin.2020.100659 ↗
10. Improving surface features of PEO coatings on titanium and titanium alloys with zirconia particles: A review10.1016/j.surfin.2020.100888 ↗
11. Corrosion behavior of Ti−6Al−4V alloy fabricated by selective laser melting in simulated spent fuel reprocessing environment10.1016/S1003-6326(24)66532-5 ↗
12. Mora-Sanchez, H., Collado-Vian, M., Mohedano, M., Arrabal, R., and Matykina, E. (2024). Corrosion of an Additively Manufactured Ti6Al4V Alloy in Saline and Acidic Media. Materials, 17.10.3390/ma17030712 ↗
13. Preparation and assessment of revised simulated body fluids10.1002/jbm.a.10482 ↗
14. Selecting medium for corrosion testing of bioabsorbable magnesium and other metals–A critical review10.1016/j.corsci.2020.108722 ↗
15. The role of individual components of simulated body fluid on the corrosion behavior of commercially pure Mg10.1016/j.corsci.2018.11.011 ↗
16. Bioactive multi-elemental PEO-coatings on titanium for dental implant applications10.1016/j.msec.2018.12.097 ↗
17. Tsai, D.-S., and Chou, C.-C. (2018). Review of the Soft Sparking Issues in Plasma Electrolytic Oxidation. Metals, 8.10.3390/met8020105 ↗
18. In vitro corrosion performance of PEO coated Ti and Ti6Al4V used for dental and orthopaedic implants10.1016/j.surfcoat.2016.08.018 ↗
19. Electrochemical Impedance Spectroscopy of Metal Oxide Electrodes for Energy Applications10.1021/acsaem.9b01965 ↗
20. Impedance behaviour of anodic TiO2 films prepared by galvanostatic anodisation and powerful pulsed discharge in electrolyte10.1016/j.electacta.2012.05.064 ↗
21. Electrochemical Impedance Spectroscopy of Oxide Layers on the Titanium Surface10.1007/s11175-005-0145-5 ↗
22. Transmission electron microscopy of coatings formed by plasma electrolytic oxidation of titanium10.1016/j.actbio.2008.10.007 ↗
23. Influence of grain orientation on oxygen generation in anodic titania10.1016/j.tsf.2007.08.104 ↗
24. Application of electrochemical impedance spectroscopy to study the degradation of polymer-coated metals10.1016/0300-9440(95)00581-1 ↗
25. Noel, J.J. (1999). The Electrochemistry of Titanium Corrosion, University of Manitoba.
26. Hybrid functionalized coatings on Metallic Biomaterials for Tissue Engineering10.1016/j.surfcoat.2021.127508 ↗
27. Investigation of the microstructural characteristics of laser-cladded Ti6Al4V titanium alloy and its corrosion behavior in simulated body fluid10.1016/j.mtcomm.2024.110780 ↗
28. Pal, S., Velay, X., and Saleem, W. (2024). Investigation into the Electrochemical Corrosion Characteristics of As-Built SLM Ti-6Al-4 V Alloy in Electrolytic Environments. J. Bio-Tribo-Corros., 10.10.1007/s40735-024-00894-6 ↗
29. Microstructure evolution, corrosion behavior, and biocompatibility of Ti-6Al-4V alloy manufactured by electron beam melting (EBM) technique10.1016/j.colsurfa.2023.132519 ↗
30. Effect of Heat Treatment on Electrochemical Behavior of Additively Manufactured Ti-6Al-4 V Alloy in Ringer’s Solution10.1007/s11665-023-08636-4 ↗
31. García-Hernández, C., García-Cabezón, C., González-Diez, F., Ampudia, M., Juanes-Gusano, D., Rodriguez-Cabello, J.C., and Martín-Pedrosa, F. (2025). Effect of processing on microstructure, mechanical properties, corrosion and biocompatibility of additive manufacturing Ti-6Al-4V orthopaedic implants. Sci. Rep., 15.10.1038/s41598-025-98349-6 ↗
32. The corrosion resistance, biocompatibility and antibacterial properties of the silver-doped dicalcium phosphate dihydrate coating on the surface of the additively manufactured NiTi alloy10.1016/j.ceramint.2024.08.250 ↗
33. Microstructural characterization and corrosion analysis of HA/TiO2 and HA/ZrO2 composite coating on Ti- alloy by laser cladding10.1016/j.apsadv.2024.100655 ↗
34. Bifunctional Metal Ion-Enhanced PDA-Coated Titanium for Superior Osteogenic and Antimicrobial Performance10.1021/acsabm.4c01869 ↗
35. Long-term corrosion behaviour of an ω-resistant, β-type Ti-12Cr-3Sn alloy: Effect of Sn addition on surface passivation and metal ion release in simulated physiological environment10.1016/j.jallcom.2025.180750 ↗
36. Microstructure and corrosion resistance of novel β-type titanium alloys manufactured by selective laser melting10.1016/j.jmrt.2022.07.021 ↗
37. Pede, D., Li, M., Poleske, T., and Mozaffari-Jovein, H. (2021). Influence of additive manufacturing and subsequent treatments on the corrosion behaviour of different titanium alloys. Proceedings of the 59th Conference of Metallurgists, The Canadian Institute of Mining, Metallurgy and Petroleum Engineering.
38. Study of multifunctional bioactive films on 3D printed titanium alloy by plasma electrolytic oxidation10.1016/j.surfcoat.2024.130431 ↗
39. Photocatalytic hydrogen evolution from titanium dioxide nanotube membranes with embedded platinum/gold nanowires10.1016/j.ijhydene.2025.01.329 ↗
40. Influence of the space-charge region on electrochemical impedance measurements on passive oxide films on titanium10.1016/S0013-4686(00)00636-8 ↗
41. Role of phosphate, silicate and aluminate in the electrolytes on PEO coating formation and properties of coated Ti6Al4V alloy10.1016/j.apsusc.2022.153523 ↗
42. A review of recent work on discharge characteristics during plasma electrolytic oxidation of various metals10.1080/09506608.2018.1466492 ↗
43. WHO (1990). Vanadium and Some Vanadium Salts. Health and Safety Guide No. 42, IPCS International Programme on Chemical Safety.
44. Human health risk assessment for aluminium, aluminium oxide, and aluminium hydroxide10.1080/10937400701597766 ↗
45. Comparison of metal release from various metallic biomaterials in vitro10.1016/j.biomaterials.2004.02.005 ↗
46. Mizuno, K., Boschetto, F., Yamamoto, K., Honma, T., Miyamoto, N., Adachi, T., Kanamura, N., Yamamoto, T., Wenliang, Z., and Marin, E. (2022). Cytotoxicity and osteogenic effects of aluminum ions. J. Inorg. Biochem., 234.10.1016/j.jinorgbio.2022.111884 ↗
47. Vanadium ionic species from degradation of Ti-6Al-4V metallic implants: In vitro cytotoxicity and speciation evaluation10.1016/j.msec.2018.11.090 ↗
48. Bioactivity of coatings formed on Ti–13Nb–13Zr alloy using plasma electrolytic oxidation10.1016/j.msec.2014.12.073 ↗