journal article·2025-07-21Open access

The Integration of Micro-CT Imaging and Finite Element Simulations for Modelling Tooth-Inlay Systems for Mechanical Stress Analysis: A Preliminary Study

Nikoleta Nikolova, Miryana Raykovska, Nikolay Petkov, Martin Tsvetkov, Ivan Georgiev, Eugeni Koytchev, Roumen Iankov, Mariana Dimova-Gabrovska, Angela Gusiyska

Abstract

This study presents a methodology for developing and validating digital models of tooth-inlay systems, aiming to trace the complete workflow from clinical procedures to simulation by involving dental professionals—dentists for manual cavity preparation and dental technicians for restoration modelling—while integrating micro-computed tomography (micro-CT) imaging with finite element analysis (FEA). The proposed workflow includes (1) the acquisition of high-resolution 3D micro-CT scans of a non-restored tooth, (2) image segmentation and reconstruction to create anatomically accurate digital twins and mesh generation, (3) the selection of proper resin and the 3D printing of four typodonts, (4) the manual preparation of cavities on the typodonts, (5) the acquisition of high-resolution 3D micro-CT scans of the typodonts, (6) mesh generation, digital inlay and onlay modelling and material property assignment, and (7) nonlinear FEA simulations under representative masticatory loading. The approach enables the visualisation of stress and deformation patterns, with preliminary results indicating stress concentrations at the tooth-restoration interface integrating different cavity alternatives and restorations on the same tooth. Quantitative outputs include von Mises stress, strain energy density, and displacement distribution. This study demonstrates the feasibility of using image-based, tooth-specific digital twins for biomechanical modelling in dentistry. The developed framework lays the groundwork for future investigations into the optimisation of restoration design and material selection in clinical applications.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Dental materials and restorations · Engineering Technology and Methodologies · Orthopaedic implants and arthroplasty

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Conservative Dentistry, Faculty of Dental Medicine, Medical University Sofia, 1431 Sofia, Bulgaria

Institute of Information and Communication Technologies, Bulgarian Academy of Sciences, 1113 Sofia, Bulgaria

Centre of Excellence in Informatics and Information and Communication Technologies, 1113 Sofia, Bulgaria

Institute of Mathematics and Informatics, Bulgarian Academy of Sciences, 1113 Sofia, Bulgaria

Institute of Mechanics, Bulgarian Academy of Sciences, 1113 Sofia, Bulgaria

National Centre of Mechatronics and Clean Technologies, 1113 Sofia, Bulgaria

Department of Prosthetic Dentistry, Faculty of Dental Medicine, Medical University Sofia, 1431 Sofia, Bulgaria

Funding

Bulgarian National Science Fund · Medical University–Sofia

References (35)

Show source-provided references
1. The Impact of Occlusal Forces on the Longevity of Restorations10.18203/2394-6040.ijcmph20233129 ↗
2. Long-Term Success of Inlay and Onlay Procedures in Dental Repairs10.18203/2394-6040.ijcmph20242688 ↗
3. Clinical Longevity of Indirect Composite Resin Inlays and Onlays: An Up to 9-Year Prospective Study10.1055/s-0041-1735420 ↗
4. Longevity of ceramic inlays/onlays, Part I10.1111/j.1708-8240.2002.tb00180.x ↗
5. Beltrán-Guijarro, M., Pérez-Pevida, E., Chávarri-Prado, D., Estrada-Martínez, A., Diéguez-Pereira, M., Sánchez-Lasheras, F., and Brizuela-Velasco, A. (2024). Biomechanical Effects of Ti-Base Abutment Height on the Dental Implant System: A Finite Element Analysis. J. Funct. Biomater., 15.10.3390/jfb15040101 ↗
6. Alemayehu, D.B., Todoh, M., and Huang, S.J. (2024). Advancing 3D Dental Implant Finite Element Analysis: Incorporating Biomimetic Trabecular Bone with Varied Pore Sizes in Voronoi Lattices. J. Funct. Biomater., 15.10.20944/preprints202403.0039.v1 ↗
7. Micro-computed tomography in preventive and restorative dental research: A review10.5624/isd.20210087 ↗
8. Finite-element modeling and analysis in nanomedicine and dentistry10.2217/nnm.14.75 ↗
9. Marcián, P., Borák, L., Zikmund, T., Horáčková, L., Kaiser, J., Joukal, M., and Wolff, J. (2021). On the limits of finite element models created from (micro) CT datasets and used in studies of bone-implant-related biomechanical problems. J. Mech. Behav. Biomed. Mater., 117.10.1016/j.jmbbm.2021.104393 ↗
10. Three-dimensional finite element modelling of all-ceramic restorations based on micro-CT10.1016/j.jdent.2013.02.014 ↗
11. 3D finite element mesh generation of complicated tooth model based on CT slices10.1016/j.cmpb.2006.02.008 ↗
12. A critical analysis of research methods and experimental models to study the load capacity and clinical behaviour of the root filled teeth10.1111/iej.13722 ↗
13. Effect of different endodontic access preparations on the biomechanical behavior of lithium disilicate and resin nanoceramic onlay restorations: An in vitro and 3D finite element analysis study10.1016/j.prosdent.2021.12.016 ↗
14. Comparative Evaluation of Stress Distribution and Deformation in Class II Cavities Restored with Two Different Biomimetic Restorative Materials: A Three-Dimensional Finite Element Analysis
15. Stress Trajectory Variations During Occlusal Loading in Human Skull with a Maxillofacial Defect: A Finite Element Analysis10.1007/s12663-023-01924-5 ↗
16. Investigation on the smoothing algorithms used in the coarse aggregate texture characterization10.1016/j.conbuildmat.2022.128348 ↗
17. Development of an objective method to quantify hippocampal dentation10.1002/hbm.26222 ↗
18. Biomechanical reinforcement by CAD-CAM materials affects stress distributions of posterior composite bridges: 3D finite element analysis10.1016/j.dental.2024.04.001 ↗
19. Effect of different restorative crown and customized abutment materials on stress distribution in single implants and peripheral bone: A three-dimensional finite element analysis study10.1016/j.prosdent.2017.03.008 ↗
20. Demircan, B., and Demir, P. (2023). 3D finite element analysis of stress distribution as a result of oblique and horizontal forces after regenerative endodontic treatment part II: Comparison of material thickness. BMC Oral Health, 23.10.1186/s12903-023-03559-x ↗
21. Pereira, G.K.R., Pilecco, R.O., da Rosa, L.S., Machry, R.V., Baldi, A., Scotti, N., Valandro, L.F., Tribst, J.P.M., and Kleverlaan, C.J. (2025). Does the Restoration Design and Material Affect Indirect Restorations’ Marginal and Internal Gap, Interfacial Volume, and Fatigue Behavior?. Eur. J. Dent.10.1055/s-0045-1802569 ↗
22. Effects of exposure equalization on image signal-to-noise ratios in digital mammography: A simulation study with an anthropomorphic breast phantom10.1118/1.3659709 ↗
23. Raykovska, M., and Georgiev, I. (2023). A new surface treatment method for simplifying and enhancing the segmentation of open space pore object. 12th Conference on Industrial Computed Tomography (iCT) 2023, 27 February–2 March 2023 in Fürth, Germany. e-J. Nondestruct. Test., 28.10.58286/27713 ↗
24. Raykovska, M., Koytchev, E., Georgiev, I., and Datcheva, M. (2025). The Application of Region Growing as a Segmentation Method in Micro–CT Studies in Endodontics. Advanced Computing in Industrial Mathematics, Springer. Available online: https://link.springer.com/chapter/10.1007/978-3-031-76786-9_13.10.1007/978-3-031-76786-9_13 ↗
25. Barioni, E.D., Lopes, S.L.P.d.C., Silvestre, P.R., Yasuda, C.L., and Costa, A.L.F. (2024). Texture Analysis in Volumetric Imaging for Dentomaxillofacial Radiology: Transforming Diagnostic Approaches and Future Directions. J. Imaging, 10.10.3390/jimaging10110263 ↗
26. Efficient 3D finite element analysis of dental restorative procedures using micro-CT data10.1016/j.dental.2006.03.013 ↗
27. Sequential software processing of micro-XCT dental-images for 3D-FE analysis10.1016/j.dental.2009.02.007 ↗
28. An evaluation using micro-CT data of the stress formed in the crown and periodontal tissues from the use of PEEK post and PEEK crown: A 3D finite element analysis study10.5577/intdentres.2018.vol8.no3.8 ↗
29. Finite element stress analysis of dental cement application on endocrown and onlay restoration10.1111/aej.12800 ↗
30. Chen, Y.C., Lin, C.L., and Hou, C.H. (2021). Investigating inlay designs of class II cavity with deep margin elevation using finite element method. BMC Oral Health, 21.10.1186/s12903-021-01630-z ↗
31. Semi or fully automatic tooth segmentation in CBCT images: A review10.7717/peerj-cs.1994 ↗
32. 3D Finite Element Model Based on CT Images of Tooth: A Simplified Method of Modeling10.20396/bjos.v19i0.8658910 ↗
33. Özcan, C., Lestriez, P., Özcan, M., and Josset, Y. (2024). Finite element analysis of dental structures: The role of mandibular kinematics and model complexity. Front. Dent. Med., 5.10.3389/fdmed.2024.1461909 ↗
34. Hasegawa, A., Shinya, A., Nakasone, Y., Lassila, L.V.J., Vallittu, P.K., and Shinya, A. (2010). Development of 3D CAD/FEM analysis system for natural teeth and jaw bone constructed from X-ray CT images. Int. J. Biomater., 2010.10.1155/2010/659802 ↗
35. Finite element models: A road to in-silico modeling in the age of personalized dentistry10.1016/j.jdent.2024.105348 ↗