journal article·2025-06-12Open access

In Vitro Biological Properties Assessment of 3D-Printed Hydroxyapatite–Polylactic Acid Scaffolds Intended for Bone Regeneration

Eddy Shan, Cristina Chamorro, Ana Ferrández-Montero, Rosa M. Martin-Rodriguez, Begoña Ferrari, Antonio Javier Sanchez-Herencia, Leire Virto, María José Marín, Elena Figuero, Mariano Sanz

Abstract

This study evaluated the biological performance in vitro of two 3D-printed hydroxyapatite (HA) and polylactic acid (PLA) composite scaffolds with two different infill densities (50% [HA-PLA50] and 70% [HA-PLA70]). Comparative analysis using MG-63 cell cultures evaluated the following: (1) integrity after exposure to various sterilization methods; (2) cell viability; (3) morphological characteristics; (4) cell proliferation; (5) cytotoxicity; (6) gene expression; and (7) protein synthesis. Ultraviolet radiation was the preferred sterilization method. Both scaffolds maintained adequate cell viability and proliferation over 7 days without significant differences in cytotoxicity. Notably, HA-PLA50 scaffolds demonstrated superior osteogenic potential, showing a significantly higher expression of collagen type I (COL1A1) and an increased synthesis of interleukins 6 and 8 (IL-6, IL-8) compared to HA-PLA70 scaffolds. While both scaffold types supported robust cell growth, the HA-PLA50 formulation exhibited enhanced bioactivity, suggesting a potential advantage for bone tissue engineering applications. These findings provide important insights for optimizing 3D-printed bone graft substitutes.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Bone Tissue Engineering Materials · 3D Printing in Biomedical Research · Dental Implant Techniques and Outcomes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Section of Periodontology, Faculty of Odontology, Complutense University of Madrid, 28040 Madrid, Spain

Etiology and Therapy of Periodontal and Peri-implant Diseases (ETEP) Research Group, Complutense University of Madrid, 28040 Madrid, Spain

Institute of Ceramics and Glass (ICV), Spanish National Research Council (CSIC), 28049 Madrid, Spain

Funding

Spanish Centre for the Development of Industrial Technology (CDTI) · Comunidad de Madrid for “Atracción de Talento” · ERDF/EU

References (35)

Show source-provided references
1. Bone healing and soft tissue contour changes following single-tooth extraction: A clinical and radiographic 12-month prospective study
2. "PASS" principles for predictable bone regeneration10.1097/01.id.0000204762.39826.0f ↗
3. Effectiveness of Lateral Bone Augmentation on the Alveolar Crest Dimension: A Systematic Review and Meta-analysis10.1177/0022034515594780 ↗
4. Techniques on vertical ridge augmentation: Indications and effectiveness10.1111/prd.12471 ↗
5. Autogenous bone graft: Basic science and clinical implications10.1097/SCS.0b013e318241dcba ↗
6. Influence of blinded wound closure on the volume stability of different GBR materials: An in vitro cone-beam computed tomographic examination10.1111/clr.12590 ↗
7. 3D printing for bone regeneration: Challenges and opportunities for achieving predictability10.1111/prd.12525 ↗
8. 3D printing of bone tissue engineering scaffolds
9. Three-Dimensional Bioprinting for Regenerative Dentistry and Craniofacial Tissue Engineering10.1177/0022034515588885 ↗
10. Effect of bioactive extruded PLA/HA composite films on focal adhesion formation of preosteoblastic cells10.1016/j.colsurfb.2014.06.029 ↗
11. Chocholata, P., Kulda, V., and Babuska, V. (2019). Fabrication of Scaffolds for Bone-Tissue Regeneration. Materials, 12.10.3390/ma12040568 ↗
12. Prefabricated 3D-Printed Tissue-Engineered Bone for Mandibular Reconstruction: A Preclinical Translational Study in Primate10.1021/acsbiomaterials.1c00509 ↗
13. Evaluation of the novel three-dimensional porous poly (L-lactic acid)/nano-hydroxyapatite composite scaffold
14. Biocompatible colloidal feedstock for material extrusion processing of bioceramic-based scaffolds10.1002/pc.28263 ↗
15. Recent developments of functional scaffolds for craniomaxillofacial bone tissue engineering applications
16. Effects of scaffold architecture on mechanical characteristics and osteoblast response to static and perfusion bioreactor cultures10.1002/bit.25200 ↗
17. Abbasi, N., Ivanovski, S., Gulati, K., Love, R.M., and Hamlet, S. (2020). Role of offset and gradient architectures of 3-D melt electrowritten scaffold on differentiation and mineralization of osteoblasts. Biomater. Res., 24.10.1186/s40824-019-0180-z ↗
18. Workflow for highly porous resorbable custom 3D printed scaffolds using medical grade polymer for large volume alveolar bone regeneration10.1111/clr.13579 ↗
19. Personalized scaffolding technologies for alveolar bone regenerative medicine10.1111/ocr.12275 ↗
20. Current trends in the design of scaffolds for computer-aided tissue engineering10.1016/j.actbio.2013.10.024 ↗
21. Effects of Gradient and Offset Architectures on the Mechanical and Biological Properties of 3-D Melt Electrowritten (MEW) Scaffolds10.1021/acsbiomaterials.8b01456 ↗
22. Smith, J.A., and Mele, E. (2021). Electrospinning and Additive Manufacturing: Adding Three-Dimensionality to Electrospun Scaffolds for Tissue Engineering. Front. Bioeng. Biotechnol., 9.10.3389/fbioe.2021.674738 ↗
23. New approach to improve polymer-Mg interface in biodegradable PLA/Mg composites through particle surface modification10.1016/j.surfcoat.2019.125285 ↗
24. Characterization and influence of hydroxyapatite nanopowders on living cells10.3762/bjnano.9.286 ↗
25. Efficacy and effectiveness of alcohol in the disinfection of semi-critical materials: A systematic review10.1590/0104-1169.0266.2611 ↗
26. Jin, P., Zhao, Y., Ngalame, Y., Panelli, M.C., Nagorsen, D., Monsurró, V., Smith, K., Hu, N., Su, H., and Taylor, P.R. (2004). Selection and validation of endogenous reference genes using a high throughput approach. BMC Genom., 5.10.1186/1471-2164-5-55 ↗
27. Sterilization techniques for biodegradable scaffolds in tissue engineering applications10.1177/2041731416648810 ↗
28. Influence of size and crystallinity of nanohydroxyapatite (nHA) particles on the properties of Polylactic Acid/nHA nanocomposite scaffolds produced by 3D printing10.1016/j.jmrt.2024.04.048 ↗
29. Chen, X., Gao, C., Jiang, J., Wu, Y., Zhu, P., and Chen, G. (2019). 3D printed porous PLA/nHA composite scaffolds with enhanced osteogenesis and osteoconductivity in vivo for bone regeneration. Biomed. Mater., 14.10.1088/1748-605X/ab388d ↗
30. Gregor, A., Filova, E., Novak, M., Kronek, J., Chlup, H., Buzgo, M., Blahnova, V., Lukasova, V., Bartos, M., and Necas, A. (2017). Designing of PLA scaffolds for bone tissue replacement fabricated by ordinary commercial 3D printer. J. Biol. Eng., 11.10.1186/s13036-017-0074-3 ↗
31. Characterization of 3D printed biodegradable piezoelectric scaffolds for bone regeneration10.1002/cre2.712 ↗
32. Resorbable polymeric scaffolds for bone tissue engineering: The influence of their microstructure on the growth of human osteoblast-like MG 63 cells10.1002/jbm.a.31977 ↗
33. Osteoblastic cell response to Al2O3-Ti composites as bone implant materials
34. Vaquette, C., Mitchell, J., Fernandez-Medina, T., Kumar, S., and Ivanovski, S. (2021). Resorbable additively manufactured scaffold imparts dimensional stability to extraskeletally regenerated bone. Biomaterials, 269.10.1016/j.biomaterials.2021.120671 ↗
35. Alveolar bone regeneration using a 3D-printed patient-specific resorbable scaffold for dental implant placement: A case report10.1111/clr.14340 ↗