journal article·2024-03-30Open access

A Finite Element Method Study on a Simulation of the Thermal Behaviour of Four Methods for the Restoration of Class II Cavities

Adela Nicoleta Staicu, Mihaela Jana Țuculină, Cristian Niky Cumpătă, Ana Maria Rîcă, Maria Cristina Beznă, Dragoș Laurențiu Popa, Alexandru Dan Popescu, Oana Andreea Diaconu

Abstract

The possibility of dental pulp damage during dental procedures is well known. According to studies, during finishing and polishing without cooling, temperatures of up to 140 °C or more can be generated. There are many studies that have analysed the influence of the finishing and polishing of fillings on the mechanical parameters, but the analysis of thermal parameters has led to uncertain results due to the difficulty of performing this in vivo. Background: We set out to conduct a study, using the finite element method, to determine the extent to which the type of class II cavity and the volume of the composite filling influence the duration of heat transfer to the pulp during finishing and polishing without cooling. Materials and Methods: A virtual model of an upper primary molar was used, with a caries process located on the distal aspect, in which four types of cavities were digitally prepared: direct access, horizontal slot, vertical slot and occlusal–proximal. All four cavity types were filled using a Filtek Supreme XT nanocomposite. Results: The study showed that the filling volume almost inversely proportionally influences the time at which the dental pulp reaches the critical temperature of irreversible damage. The lowest duration occurred in occlusal–distal restorations and the highest in direct access restorations. Conclusions: based on the results of the study, a working protocol can be issued so that finishing and polishing restorations without cooling are safe for pulpal health.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Dental materials and restorations · Dental Research and COVID-19 · Dental Erosion and Treatment

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Endodontics, Faculty of Dentistry, University of Medicine and Pharmacy of Craiova, 200349 Craiova, Romania

Department of maxillofacial surgery, Faculty of Dental Medicine, University Titu Maiorescu of Bucharest, 67A Gheorghe Petrascu Str., 031593 Bucharest, Romania

Department of Pathophysiology, Faculty of Dentistry, University of Medicine and Pharmacy of Craiova, 200349 Craiova, Romania

Department of Automotive, Transportation and Industrial Engineering, Faculty of Mechanics, University of Craiova, 200478 Craiova, Romania

Funding

Doctoral School of the University of Medicine and Pharmacy of Craiova, Romania

References (62)

Show source-provided references
1. A five-year clinical evaluation of Class II composite resin restorations10.1016/S0300-5712(99)00059-7 ↗
2. Survival, reasons for failure and clinical characteristics of anterior/posterior composites: 8-year findings10.1590/0103-6440201802192 ↗
3. Should my composite restorations last forever? Why are they failing?10.1590/1807-3107bor-2017.vol31.0056 ↗
4. Amalgam or composite resin? Factors influen cing the choice of restorative material10.1016/j.jdent.2012.04.020 ↗
5. Ziwniewska, I., Macieljczyk, M., and Zalewska, A. (2020). The Effect of Selected Dental Materials Used in Conservative Dentistry, Endodontics, Surgery, and Orthodontics as Well as during the Periodontal Treatment on the Redox Balance in the Oral Cavity. Int. J. Mol. Sci., 21.10.3390/ijms21249684 ↗
6. Treatment of proximal caries lesions by tunnel restorations10.1016/j.dental.2006.12.004 ↗
7. Posterior composite restoration update: Focus on factors influencing form and function10.2147/CCIDE.S42044 ↗
8. Academy of Dental Materials guidance-Resin composites: Part I-Mechanical properties10.1016/j.dental.2017.04.013 ↗
9. Thermocycling effect on mechanical and tribological characterization of two indirect dental restorative materials10.1007/s40430-016-0579-6 ↗
10. Țuculină, M.J., Staicu, A.N., Munteanu, M.C., Cumpătă, C.N., Dimitriu, B., Rîcă, A.M., Beznă, M.C., Popa, D.L., Popescu, A.D., and Țîrcă, T. (2023). Study on the Restoration of Class II Carious Cavities by Virtual Methods: Simulation of Mechanical Behavior. J. Funct. Biomater., 14.10.3390/jfb14070354 ↗
11. Reise, M., Kranz, S., Heyder, M., Beck, J., Roth, C., Guellmar, A., von Eggeling, F., Schubert, U., Löffler, B., and Sigusch, B. (2023). Salivary Pellicle Formed on Dental Composites Evaluated by Mass Spectrometry—An In Situ Study. Molecules, 28.10.3390/molecules28196804 ↗
12. Gradinaru, I., Vasiliu, A.L., Bargan, A., Checherita, L.E., Ciubotaru, B.-I., Armencia, A.O., Istrate, B., Dascalu, C.G., and Antohe, M.E. (2023). The Influence of Beverages on Resin Composites: An In Vitro Study. Biomedicines, 11.10.3390/biomedicines11092571 ↗
13. Ag-Doped Sol-Gel Derived Novel Composite Materials for Dental Applications10.4028/www.scientific.net/KEM.493-494.637 ↗
14. New developments of polymeric dental composites10.1016/S0079-6700(01)00005-3 ↗
15. Temperature excursions at the pulp–dentin junction during the curing of light-activated dental restorations10.1016/j.dental.2008.03.012 ↗
16. Effect of thermal and mechanical loading on marginal adaptation and microtensile bond strength of a self-etching adhesive with caries-affected dentin10.4103/0972-0707.80744 ↗
17. Thermal properties of teeth10.1177/00220345700490040701 ↗
18. Structural and Dielectric Properties of Sterilized Human Teeth10.3844/pisp.2012.22.27 ↗
19. Effect of fi nishing time and techniques on marginal sealing ability of two composite restorative materials10.1067/mpr.2002.127416 ↗
20. Thermal trauma to teeth10.1111/j.1600-9657.1985.tb00575.x ↗
21. Heat generated during dental treatments affecting intrapulpal temperature: A review10.1007/s00784-023-04951-1 ↗
22. The surface finish of composite restorative materials10.1038/sj.bdj.4803105 ↗
23. Dental Composites-A Versatile Restorative Material: An Overview
24. Acoustic emission characterization of the marginal disintegration of dental composite restoration10.1016/j.compositesa.2011.01.019 ↗
25. (2022, October 19). Oqton: Manufacturing Software Solutions. Available online: http://www.geomagic.com/en.
26. (2023, May 11). Quara. Available online: https://www.quora.com/What-is-ANSYS-software.
27. (2023, January 13). Ansys. Available online: https://www.ansys.com/.
28. (2023, June 12). Inas. Available online: https://www.inas.ro/ro/.
29. Simulation study on convective heat transfer of the tongue in closed mouth
30. An investigation of temperature and stress distribution on a restored maxillary second premolar tooth using a three-dimensional finite element method
31. The effect of cuspal flexure on a buccal Class V restoration: A finite element study10.1016/S0300-5712(97)00015-8 ↗
32. Modeling the mechanical behavior of the jaws and their related structures by finite element (FE) analysis10.1177/10454411970080010501 ↗
33. Numerical fatigue 3D-FE modeling of indirect composite-restored posterior teeth10.1016/j.dental.2010.12.001 ↗
34. Transient thermal and stress analysis of maxillary second premolar tooth using an exact three-dimensional model10.4103/0970-9290.66624 ↗
35. Correlation of filler content and elastic properties of resin-composites10.1016/j.dental.2007.11.007 ↗
36. Simultaneous determination of polymerization shrinkage, exotherm and thermal expansion coefficient for dental resin-composites10.1016/j.dental.2012.09.004 ↗
37. Thermal properties of nanofilled and microfilled restorative composites
38. Evaluation of resin composite materials. Part II: In vivo investigations
39. Effect of cavity preparation design on the fracture resistance of directly and indirectly restored premolars
40. Fracture strength of the remaining dental structure after different cavity preparation designs
41. Effects of Cavity Configuration on Composite Restoration
42. The influence of cavity geometry on heat transmission in restored teeth10.1016/0300-5712(86)90050-3 ↗
43. Influence of aging solutions on wear resistance and hardness of selected resin-based dental composites
44. Influence of thermal fatigue and ageing on the microhardness of polymer-ceramic composites for bio-medical applications
45. Pulp response to external heat10.1016/0030-4220(65)90015-0 ↗
46. Clinical and histological evaluation of thermal injury thresholds in human teeth: A preliminary study10.1111/j.1365-2842.1997.tb00278.x ↗
47. Temperature-dependent changes in the microcirculation of the dental pulp
48. Heat Development in the Pulp Chamber During Curing Process of Resin-Based Composite Using Multi-Wave LED Light Curing Unit10.2147/CCIDE.S257450 ↗
49. Thermal rise during photopolymerization and degree of conversion of bulk fill and conventional resin composites10.4103/1735-3327.292064 ↗
50. Degree of conversion and in vitro temperature rise of pulp chamber during polymerization of flowable and sculptable conventional, bulk-fill and short-fibre reinforced resin composites10.1016/j.dental.2021.02.013 ↗
51. Silva, J.P., Coelho, A., Paula, A., Amaro, I., Saraiva, J., Ferreira, M.M., Marto, C.M., and Carrilho, E. (2021). The Influence of Irrigation during the Finishing and Polishing of Composite Resin Restorations—A Systematic Review of In Vitro Studies. Materials, 14.10.3390/ma14071675 ↗
52. An Invitro Study to Evaluate the Rise in Pulpal Temperature During Finishing and Polishing of A) Composite, b) Resin Modified Glass Ionomer, C) Compomer Restorations. ProQuest Dissertations Publishing
53. In vitro comparison of the cutting efficiency and temperature pro-duction of 10 different rotary cutting instruments. Part I: Turbine10.1016/S0022-3913(09)60049-4 ↗
54. Effect of cooling water temperature on the temperature changes in pulp chamber and at handpiece head during high-speed tooth preparation10.5395/rde.2019.44.e3 ↗
55. Temperature related changes in pulpal micro-circulation
56. Comparison of wet and dry finishing of resin composites with aluminum oxide discs10.1016/0109-5641(91)90020-Y ↗
57. Effects of Wet and Dry Finishing and Polishing on Surface Roughness and Microhardness of Composite Resins
58. Janeczek, M., Herman, K., Fita, K., Dudek, K., Kowalczyk-Zając, M., Czajczyńska-Waszkiewicz, A., Piesiak-Pańczyszyn, D., Kosior, P., and Dobrzyński, M. (2016). Assessment of Heat Hazard during the Polymerization of Selected Light-Sensitive Dental Materials. BioMed Res. Int., 2016.10.1155/2016/4158376 ↗
59. (2023, June 12). Your Home, Available online: https://www.yourhome.gov.au/passive-design/thermal-mass.
60. A comparative evaluation of pulp chamber temperature rise associated with polishing of light cure composite restoration using 2 different polishing systems10.4103/0972-0707.41305 ↗
61. The Effect of Different Polishing Methods and Composite Resin Thickness on Temperature Rise of Composite Restorative Materials
62. An investigation of thermal stimulation in intact teeth10.1016/j.archoralbio.2006.10.009 ↗