journal article·2025-06-02Open access

Fracture Resistance of CAD/CAM-Fabricated Zirconia and Lithium Disilicate Crowns with Different Margin Designs: Implications for Digital Dentistry

Tareq Hajaj, Diana Marian, Cristian Zaharia, Serban Talpos Niculescu, Radu Marcel Negru, Florina Titihazan, Mihai Rominu, Cosmin Sinescu, Andreea Codruta Novac, Gabriel Dobrota, Ioana Veja

Abstract

Objective: This in vitro study aimed to evaluate the influence of cervical margin design—tangential versus chamfer—on the fracture resistance of monolithic crowns fabricated from lithium disilicate and zirconia ceramics. Materials and Methods: Forty extracted human molars were randomly assigned to two preparation types: chamfer and tangential. Each group was restored with CAD/CAM-fabricated crowns made from either zirconia (IPS e.max® ZirCAD Prime) or lithium disilicate (IPS e.max® CAD), resulting in four subgroups (n = 10). Standardized adhesive cementation protocols were applied. After 24 h storage in distilled water, the specimens underwent static load-to-failure testing using a ZwickRoell ProLine Z005 universal testing machine. Results: Zirconia crowns with chamfer margins exhibited the highest mean fracture resistance (2658 N), while lithium disilicate crowns with tangential margins showed the lowest (1862 N). Chamfer preparation significantly increased the fracture resistance of lithium disilicate crowns (p < 0.01), whereas margin design had no significant effect on zirconia. All restorations exceeded physiological masticatory forces, confirming their clinical viability. Conclusions: Cervical margin design significantly affected the fracture performance of lithium disilicate crowns but not zirconia. Chamfer preparations are recommended when using lithium disilicate to optimize mechanical strength. These findings underscore the importance of preparation geometry in guiding material selection for CAD/CAM ceramic restorations.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Dental materials and restorations · Endodontics and Root Canal Treatments · Anatomy and Medical Technology

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Prostheses Technology and Dental Materials, Faculty of Dentistry, Victor Babes University of Medicine and Pharmacy, 2 Eftimie Murgu Sq., 300041 Timisoara, Romania

Research Center in Dental Medicine Using Conventional and Alternative Technologies, Faculty of Dental Medicine, Victor Babes University of Medicine and Pharmacy of Timisoara, 9 Revolutiei 1989 Ave, 300070 Timisoara, Romania

Department of Dental Medicine, Faculty of Dentistry, “Vasile Goldis” Western University of Arad, Str. Liviu Rebreanu 86, 310045 Arad, Romania

Department of Oral and Maxillofacial Surgery, Faculty of Dentistry, Victor Babes University of Medicine and Pharmacy, 2 Eftimie Murgu Sq., 300041 Timisoara, Romania

Department of Mechanics and Strength of Materials, Polytechnic University of Timișoara, 2 Piata Victoriei 2., 300006 Timisoara, Romania

Department of Prosthodontics, Faculty of Dentistry, Victor Babes University of Medicine and Pharmacy, 2 Eftimie Murgu Sq., 300041 Timisoara, Romania

Funding

“Victor Babes” University of Medicine and Pharmacy in Timisoara, Romania

References (36)

Show source-provided references
1. Influence of Cervical Finish Line Type on the Marginal Adaptation of Zirconia Ceramic Crowns10.2341/08-076-L ↗
2. The Evaluation of the Prosthetic Preparations Finish Lines for Provisional Crowns with the Impact on Periodontal Health
3. Staged Esthetic Crown Lengthening: Classification and Guidelines for Periodontal-Restorative Therapy10.1111/jerd.13180 ↗
4. Healing of the Dento-Epithelial Junction Following Subgingival Plaque Control. II: As Observed on Extracted Teeth10.1902/jop.1978.49.3.119 ↗
5. Effect of Finish Line Design on Stress Distribution in Bilayer and Monolithic Zirconia Crowns: A Three-Dimensional Finite Element Analysis Study10.1111/eos.12402 ↗
6. Pan, C.Y., Lan, T.H., Lan, T.H., and Liu, P.H. (2020). Comparison of Different Cervical Finish Lines of All-Ceramic Crowns on Primary Molars in Finite Element Analysis. Materials, 13.10.3390/ma13051094 ↗
7. Features of Fracture of Prosthetic Tooth-Endocrown Constructions by Means of Acoustic Emission Analysis10.1016/j.dental.2018.01.023 ↗
8. Histological Study of Human Periodontal Tissue Following Biologically Oriented Preparation Technique (BOPT)
9. Accuracy and Practicality of Intraoral Scanner in Dentistry: A Literature Review10.1016/j.jpor.2019.07.010 ↗
10. Key Stages of Dentistry and Prosthetic Dentistry Evolution: From Ancient Times to the Early 20th Century
11. The History of Prosthetic Dentistry10.1016/0022-3913(59)90049-6 ↗
12. Safeguarding Our Dentistry Heritage: A Study of the History and Conservation of Nineteenth–Twentieth Century Dentures10.1186/s40494-023-00989-2 ↗
13. A Brief History of the Development and Use of Vulcanised Rubber in Dentistry10.1038/s41415-023-5735-7 ↗
14. Factors Involved in the Chromatic Failures of Non-Metallic Fixed Dental Prostheses
15. Use of Zirconia in Dentistry: An Overview10.2174/1876502501405010001 ↗
16. Tooth Preparations for Complete Crowns: An Art Form Based on Scientific Principles10.1067/mpr.2001.114685 ↗
17. (2015). Dentistry—Ceramic Materials (Standard No. ISO 6872: 2015).
18. Vichi, A., Zhao, Z., Paolone, G., Scotti, N., Mutahar, M., Goracci, C., and Louca, C. (2022). Factory Crystallized Silicates for Monolithic Metal-Free Restorations: A Flexural Strength and Translucency Comparison Test. Materials, 15.10.3390/ma15217834 ↗
19. Accuracy of Intraoral Scanners: A Systematic Review of Influencing Factors
20. Mangano, F., Gandolfi, A., Luongo, G., and Logozzo, S. (2017). Intraoral Scanners in Dentistry: A Review of the Current Literature. BMC Oral Health, 17.10.1186/s12903-017-0442-x ↗
21. Trueness and Precision of an Intraoral Scanner on Abutments with Subgingival Vertical Margins: An In Vitro Study10.1016/j.jdent.2024.104943 ↗
22. Effect of Finish Line Locations of Tooth Preparation on the Accuracy of Intraoral Scanners
23. Ferrari Cagidiaco, E., Goracci, C., Marconi, A., Vichi, A., and Grandini, S. (2021). Analysis of the Reproducibility of Subgingival Vertical Margins Using Intraoral Optical Scanning (IOS): A Randomized Controlled Pilot Trial. J. Clin. Med., 10.10.3390/jcm10050941 ↗
24. Rădulescu, V., Boariu, M., Rusu, D., Boldeanu, C., Christodorescu, R., Roman, A., Surlin, P., Didilescu, A.C., Vela, O., and Kardaras, G. (2022). Is the Diagnosis of Generalized Stage IV (Severe) Periodontitis Compatible with the Survival of Extended Stabilizing Prosthetic Restorations? A Medium-Term Retrospective Study. Diagnostics, 12.10.3390/diagnostics12123053 ↗
25. Zirconia Based Dental Ceramics: Structure, Mechanical Properties, Biocompatibility and Applications10.1039/C6DT03484E ↗
26. The Effect of Various Veneering Techniques on the Marginal Fit of Zirconia Copings10.4047/jap.2015.7.3.233 ↗
27. Zirconia in Dental Prosthetics: A Literature Review10.1016/j.jmrt.2019.06.043 ↗
28. Hajaj, T., Lile, I.E., Veja, I., Titihazan, F., Rominu, M., Negruțiu, M.L., Sinescu, C., Novac, A.C., Talpoș Niculescu, S., and Zaharia, C. (2025). Influence of Pontic Length on the Structural Integrity of Zirconia Fixed Partial Dentures (FPDs). J. Funct. Biomater., 16.10.3390/jfb16040116 ↗
29. Magne, P., and Belser, U. (2021). Biomimetic Restorative Dentistry, Quintessence Publishing. [2nd ed.].
30. Sinescu, C., Bradu, A., Duma, V.-F., Topala, F., Negrutiu, M., and Podoleanu, A.G. (2017). Effects of Temperature Variations during Sintering of Metal Ceramic Tooth Prostheses Investigated Non-Destructively with Optical Coherence Tomography. Appl. Sci., 7.10.3390/app7060552 ↗
31. Serban, C., Lungeanu, D., Bota, S.D., Cotca, C.C., Negrutiu, M.L., Duma, V.F., Sinescu, C., and Craciunescu, E.L. (2022). Emerging Technologies for Dentin Caries Detection-A Systematic Review and Meta-Analysis. J. Clin. Med., 11.10.3390/jcm11030674 ↗
32. Magnetodielectric Effects in Magnetorheological Elastomers Based on Polymer Fabric, Silicone Rubber, and Magnetorheological Suspension10.1155/2019/1983547 ↗
33. Failures in Fixed Dental Prostheses: A Clinical Survey on Causes and Longevity
34. Adhesive bonding of resin composite to various titanium surfaces using different metal conditioners and a surface modification system10.1590/1679-775720130255 ↗
35. Avram, L.T., Galațanu, S.V., Opriș, C., Pop, C., and Jivănescu, A. (2022). Effect of Different Etching Times with Hydrofluoric Acid on the Bond Strength of CAD/CAM Ceramic Material. Materials, 15.10.3390/ma15207071 ↗
36. Olariu, I., Marian, D., Veja, I., Flueras, R., Popovici, R.A., Pitic, D.E., Stana, H.A., Vaida, L.L., and Lile, I.E. (2024). Exploring Dentists’ Preferences in Selecting Adhesive Systems: A Survey Analysis. Appl. Sci., 14.10.3390/app142210119 ↗