journal article·2025-04-28Open access

Correlation Between Polymerization Shrinkage and Filler Content for Universal Shade Flowable Resin-Based Composites

Nagisa Matsui, Mayumi Maesako, Ahmad Alkhazaleh, Masao Irie, Akimasa Tsujimoto

Abstract

The purpose of this study was to measure the filler content by weight and volume of universal shade flowable resin-based composites and analyze the correlation between polymerization shrinkage and filler content. The filler content by weight of six universal shade flowalble resin-based composites (Bulk Base Hard II Medium Flow, A-Uno Flow Basic, Clearfil Majesty ES Flow Low, Gracefill Low Flow, Omnichroma Flow, Omnichroma Flow Bulk) was measured in accordance with ISO 17304. The filler content by volume of each flowable resin-based composite was determined by measuring the density of the filler using a dry density meter, and the filler content by volume of the composite was calculated from the densities obtained. The correlations between filler content by weight or volume, polymerization shrinkage and filler content by weight ratio, and polymerization shrinkage and filler content by volume were analyzed. The filler content of the universal flowable resin-based composites ranged from 59.40 to 69.81% (by weight) and from 40.61 to 54.84% (by volume), and the correlations between the values for filler content of the composites by weight and volume were weakly negative and not statistically significant. The correlations between polymerization shrinkage (3.15–4.48%) and filler content by weight or volume were also not statistically significant.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Dental materials and restorations · Innovations in Concrete and Construction Materials · Epoxy Resin Curing Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Operative Dentistry, School of Dentistry, Aichi Gakuin University, Nagoya 464-8651, Japan

Department of Restorative Dentistry, Oregon Health Science University School of Dentistry, Portland, OR 97201, USA

Department of Biomaterials, Okayama University Graduate School of Medicine, Dentistry and Pharmaceutical Sciences, 2-5-1 Shikata-cho, Kita-ku, Okayama 700-8525, Japan

Department of Operative Dentistry, University of Iowa College of Dentistry, Iowa City, IA 52242, USA

Department of General Dentistry, Creighton University School of Dentistry, Omaha, NE 68102, USA

Funding

JSPS KAKENHI · Sun Medical Co., Ltd.

References (27)

Show source-provided references
1. Adhesive dentistry: Current concepts and clinical considerations10.1111/jerd.12692 ↗
2. Direct composite resin fillings versus amalgam fillings for permanent posterior teeth
3. Longevity of composite restorations is definitely not only about materials10.1016/j.dental.2022.11.009 ↗
4. Clinical efficacy of resin-based direct posterior restorations and glass-ionomer restorations—An updated meta-analysis of clinical outcome parameters10.1016/j.dental.2021.10.018 ↗
5. Biocompatibility of amalgam vs composite—A review
6. Polymerization and shrinkage kinetics and fracture toughness of bulk-fill resin-composites10.1016/j.dental.2022.10.002 ↗
7. Developments in resin-based composites10.1038/s41415-022-4240-8 ↗
8. Maesako, M., Fischer, N.G., Matsui, N., Elgreatly, A., Mahrous, A., and Tsujimoto, A. (2024). Comparing Polymerization Shrinkage Measurement Methods for Universal Shade Flowable Resin-Based Composites. Biomimetics, 9.10.3390/biomimetics9120753 ↗
9. The effect of high-irradiance rapid polymerization on degree of conversion, monomer elution, polymerization shrinkage and porosity of bulk-fill resin composites10.1016/j.dental.2023.03.016 ↗
10. Real-time in-depth imaging of gap formation in bulk-fill resin composites10.1016/j.dental.2019.01.020 ↗
11. The Silorane-based Resin Composites: A Review10.2341/15-311-LIT ↗
12. Effect of Layering Techniques on Polymerization Shrinkage Stress of High- and Low-viscosity Bulk-fill Resins10.2341/19-217-L ↗
13. Microleakage of Direct Restorations—Comparison between Bulk-Fill and Traditional Composite Resins: Systematic Review and Meta-Analysis10.1055/s-0041-1724155 ↗
14. Comparison of surface properties of universal shade and conventional resin-based composites after degradation and repolishing
15. Visual evaluation of the color adjustment of single-shade and group shade resin composites in restorations with different cavity configurations10.1016/j.jdent.2024.105262 ↗
16. Polymerization shrinkage stress of resin-based dental materials: A systematic review and meta-analyses of composition strategies10.1016/j.jmbbm.2018.03.019 ↗
17. Influence of inorganic filler content on the radiopacity of dental resin cements10.4012/dmj.2011-225 ↗
18. (2019). Dentistry—Polymer-Based Restorative Materials (Standard No. ISO4049).
19. Polymerization shrinkage assessment of dental resin composites: A literature review10.1007/s10266-016-0264-3 ↗
20. Linear and volumetric shrinkage displacements of resin composite restorations with and without debonding10.4012/dmj.2023-023 ↗
21. Tsujimoto, A., Irie, M., Teixeira, E.C.N., Jurado, C.A., Maruo, Y., Nishigawa, G., Matsumoto, T., and Garcia-Godoy, F. (2021). Relationships between Flexural and Bonding Properties, Marginal Adaptation, and Polymerization Shrinkage in Flowable Composite Restorations for Dental Application. Polymers, 13.10.3390/polym13162613 ↗
22. Simulating the shrinkage-induced interfacial damage around Class I composite resin restorations with damage mechanics10.1016/j.dental.2023.03.020 ↗
23. External marginal gap evaluation of different resin-filling techniques for class II restorations-A micro-CT and SEM analysis10.2341/19-053-L ↗
24. (2013). Dentistry-Polymerization Shrinkage: Method for Determination of Polymerization Shrinkage of Polymer-Based Restorative Materials (Standard No. ISO 17304).
25. New Resins for Dental Composites10.1177/0022034517720658 ↗
26. Polymer-Based Direct Filling Materials10.1016/j.cden.2017.06.002 ↗
27. Characteristics of low polymerization shrinkage flowable resin composites in newly-developed cavity base materials for bulk filling technique10.4012/dmj.2016-394 ↗