journal article·2025-03-14Open access

Three-Dimensional Bioprinting for Intervertebral Disc Regeneration

Md Amit Hasan Tanvir, Md Abdul Khaleque, Junhee Lee, Jong-Beom Park, Ga-Hyun Kim, Hwan-Hee Lee, Young-Yul Kim

Abstract

The rising demand for organ transplants and the need for precise tissue models have positioned the in vitro biomanufacturing of tissues and organs as a pivotal area in regenerative treatment. Considerable development has been achieved in growing tissue-engineered intervertebral disc (IVD) scaffolds, designed to meet stringent mechanical and biological compatibility criteria. Among the cutting-edge approaches, 3D bioprinting stands out due to its unparalleled capacity to organize biomaterials, bioactive molecules, and living cells with high precision. Despite these advancements, polymer-based scaffolds still encounter limitations in replicating the extracellular matrix (ECM)-like environment, which is fundamental for optimal cellular activities. To overcome these challenges, integrating polymers with hydrogels has been recommended as a promising solution. This combination enables the advancement of porous scaffolds that nurture cell adhesion, proliferation, as well as differentiation. Additionally, bioinks derived from the decellularized extracellular matrix (dECM) have exhibited potential in replicating biologically relevant microenvironments, enhancing cell viability, differentiation, and motility. Hydrogels, whether derived from natural sources involving collagen and alginate or synthesized chemically, are highly valued for their ECM-like properties and superior biocompatibility. This review will explore recent advancements in techniques and technologies for IVD regeneration. Emphasis will be placed on identifying research gaps and proposing strategies to bridge them, with the goal of accelerating the translation of IVDs into clinical applications.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: 3D Printing in Biomedical Research · Spine and Intervertebral Disc Pathology · Bone Tissue Engineering Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Orthopedic Surgery, Daejeon St. Mary’s Hospital, The Catholic University of Korea, Seoul 34943, Republic of Korea

Department of Bionic Machinery, KIMM Institute of AI Robot, Korea Institute of Machinery and Materials, Daejeon 34103, Republic of Korea

Department of Orthopedic Surgery, Uijeongbu Saint Mary’s Hospital, The Catholic University of Korea, Seoul 11765, Republic of Korea

Funding

Catholic University of Korea Daejeon St. Mary’s Hospital

References (100+)

Show source-provided references
1. Strategies in regenerative medicine for intervertebral disc repair using mesenchymal stem cells and bioscaffolds10.2217/rme-2016-0069 ↗
2. Khaleque, M.A., Kim, J.-H., Hwang, B.-J., Kang, J.-K., Quan, M., and Kim, Y.-Y. (2023). Role of necroptosis in intervertebral disc degeneration. Int. J. Mol. Sci., 24.10.3390/ijms242015292 ↗
3. Autophagy in an extruded disc compared to the remaining disc after lumbar disc herniation in the same patient10.1007/s00586-023-07731-3 ↗
4. Biomechanical analysis of the camelid cervical intervertebral disc
5. Khaleque, M.A., Kim, J.-H., Lee, H.-H., Kim, G.-H., You, W.-Y., Lee, W.-J., and Kim, Y.-Y. (2024). Comparative Analysis of Autophagy and Apoptosis in Disc Degeneration: Understanding the Dynamics of Temporary-Compression-Induced Early Autophagy and Sustained-Compression-Triggered Apoptosis. Int. J. Mol. Sci., 25.10.3390/ijms25042352 ↗
6. Tissue engineering advances in spine surgery10.2217/rme.16.3 ↗
7. Biomechanical evaluation of pedicle screw fixation system in spinal adjacent levels using polyetheretherketone, carbon-fiber-reinforced polyetheretherketone, and traditional titanium as rod materials10.1016/j.compositesb.2017.07.052 ↗
8. Decellularized scaffolds for intervertebral disc regeneration10.1016/j.tibtech.2020.05.002 ↗
9. Tissue-engineered total disc replacement: Final outcomes of a murine caudal disc in vivo study10.1055/s-0031-1274758 ↗
10. 3D segmentation of intervertebral discs: From concept to the fabrication of patient-specific scaffolds10.2217/3dp-2016-0011 ↗
11. 3D bioprinting for organ regeneration10.1002/adhm.201601118 ↗
12. 3D bioprinting of tissues and organs10.1038/nbt.2958 ↗
13. Modulation of the gene expression of annulus fibrosus-derived stem cells using poly(ether carbonate urethane)urea scaffolds of tunable elasticity10.1016/j.actbio.2015.09.039 ↗
14. van Uden, S., Silva-Correia, J., Correlo, V.M., Oliveira, J.M., and Reis, R.L. (2015). Custom-tailored tissue engineered polycaprolactone scaffolds for total disc replacement. Biofabrication, 7.10.1088/1758-5090/7/1/015008 ↗
15. 3D-Printed ABS and PLA Scaffolds for Cartilage and Nucleus Pulposus Tissue Regeneration10.3390/ijms160715118 ↗
16. Oriented lamellar silk fibrous scaffolds to drive cartilage matrix orientation: Towards annulus fibrosus tissue engineering10.1016/j.actbio.2012.05.023 ↗
17. Tanvir, M.A.H., Khaleque, M.A., Kim, G.-H., Yoo, W.-Y., and Kim, Y.-Y. (2024). The Role of Bioceramics for Bone Regeneration: History, Mechanisms, and Future Perspectives. Biomimetics, 9.10.20944/preprints202404.0387.v1 ↗
18. Tailoring mechanical properties of decellularized extracellular matrix bioink by vitamin B2-induced photo-crosslinking10.1016/j.actbio.2016.01.013 ↗
19. Printing three-dimensional tissue analogues with decellularized extracellular matrix bioink10.1038/ncomms4935 ↗
20. Development of a bovine decellularized extracellular matrix-biomaterial for nucleus pulposus regeneration10.1002/jor.23088 ↗
21. Fan, D., Li, Y., Wang, X., Zhu, T., Wang, Q., Cai, H., Li, W., Tian, Y., and Liu, Z. (2020). Progressive 3D Printing Technology and Its Application in Medical Materials. Front. Pharmacol., 11.10.3389/fphar.2020.00122 ↗
22. Long-term delivery of alendronate through an injectable tetra-PEG hydrogel to promote osteoporosis therapy10.1039/D0BM00376J ↗
23. Liu, Z., Liu, J., Cui, X., Wang, X., Zhang, L., and Tang, P. (2020). Recent Advances on Magnetic Sensitive Hydrogels in Tissue Engineering. Front. Chem., 8.10.3389/fchem.2020.00124 ↗
24. Yu, T., Wang, H., Zhang, Y., Wang, X., and Han, B. (2020). The Delivery of RNA-Interference Therapies Based on Engineered Hydrogels for Bone Tissue Regeneration. Front. Bioeng. Biotechnol., 8.10.3389/fbioe.2020.00445 ↗
25. Natural origin biodegradable systems in tissue engineering and regenerative medicine: Present status and some moving trends10.1098/rsif.2007.0220 ↗
26. Tang, G., Zhou, B., Li, F., Wang, W., Liu, Y., Wang, X., Liu, C., and Ye, X. (2020). Advances of naturally derived and synthetic hydrogels for intervertebral disk regeneration. Front. Bioeng. Biotechnol., 8.10.3389/fbioe.2020.00745 ↗
27. Cell-laden interpenetrating network hydrogels formed from methacrylated gelatin and silk fibroin via a combination of sonication and photocrosslinking approaches10.1016/j.msec.2019.01.079 ↗
28. Multi-physical field coupling for vibration feed electrochemical machining of diamond-shaped hole in titanium alloy10.1007/s00170-019-04701-2 ↗
29. Metal Additive Manufacturing: A Review10.1007/s11665-014-0958-z ↗
30. Ceramic Stereolithography: Additive Manufacturing for Ceramics by Photopolymerization10.1146/annurev-matsci-070115-031841 ↗
31. Three-dimensional printing of transparent fused silica glass10.1038/nature22061 ↗
32. Fabrication of arbitrary three-dimensional suspended hollow microstructures in transparent fused silica glass10.1038/s41467-019-09497-z ↗
33. Polymers for 3D Printing and Customized Additive Manufacturing10.1021/acs.chemrev.7b00074 ↗
34. 3D printing of polymer matrix composites: A review and prospective10.1016/j.compositesb.2016.11.034 ↗
35. Additive manufacturing of multi-material structures10.1016/j.mser.2018.04.001 ↗
36. 3D printing of hydrogels: Rational design strategies and emerging biomedical applications10.1016/j.mser.2020.100543 ↗
37. Mironov, V., Boland, T., Trusk, T., Forgacs, G., and Markwald, R.R. (2004). Erratum: Organ printing, computer-aided jet-based 3D tissue engineering. Trends Biotechnol., 22.10.1016/j.tibtech.2004.04.004 ↗
38. Cell and organ printing 2: Fusion of cell aggregates in three-dimensional gels10.1002/ar.a.10059 ↗
39. Cytoscribing: A method for micropositioning cells and the construction of two-and three-dimensional synthetic tissues10.1016/0014-4827(88)90275-3 ↗
40. Surface tensions of embryonic tissues predict their mutual envelopment behavior10.1242/dev.122.5.1611 ↗
41. Laser-guided direct writing for applications in biotechnology10.1016/S0167-7799(99)01355-4 ↗
42. Use of 3D bioprinting in biomedical engineering for clinical application10.5114/ms.2018.74827 ↗
43. Rapid prototyping of scaffolds derived from thermoreversible hydrogels and tailored for applications in tissue engineering10.1016/S0142-9612(02)00139-4 ↗
44. Cell and organ printing 1: Protein and cell printers10.1002/ar.a.10057 ↗
45. Rapid prototyping of tissue-engineering constructs, using photopolymerizable hydrogels and stereolithography10.1089/ten.2004.10.1316 ↗
46. Electrohydrodynamic jet processing: An advanced electric-field-driven jetting phenomenon for processing living cells10.1002/smll.200500291 ↗
47. Scaffold-free vascular tissue engineering using bioprinting10.1016/j.biomaterials.2009.06.034 ↗
48. Bioprinted amniotic fluid-derived stem cells accelerate healing of large skin wounds10.5966/sctm.2012-0088 ↗
49. State-of-the-Art Review of 3D Bioprinting for Cardiovascular Tissue Engineering10.1007/s10439-016-1607-5 ↗
50. Continuous optical 3D printing of green aliphatic polyurethanes10.1021/acsami.6b12500 ↗
51. 3D Printing of Personalized Thick and Perfusable Cardiac Patches and Hearts10.1002/advs.201900344 ↗
52. 3D bioprinting of collagen to rebuild components of the human heart10.1126/science.aav9051 ↗
53. Ahn, S.H., Lee, H.J., Lee, J.-S., Yoon, H., Chun, W., and Kim, G.H. (2015). A novel cell-printing method and its application to hepatogenic differentiation of human adipose stem cell-embedded mesh structures. Sci. Rep., 5.10.1038/srep13427 ↗
54. Three-dimensional fabrication of cell-laden biodegradable poly (ethylene glycol-co-depsipeptide) hydrogels by visible light stereolithography10.1039/C5TB01468A ↗
55. Preparation of poly (ε-caprolactone)-based tissue engineering scaffolds by stereolithography10.1016/j.actbio.2011.06.039 ↗
56. Three-dimensional photopatterning of hydrogels using stereolithography for long-term cell encapsulation10.1039/c004285d ↗
57. Designed biodegradable hydrogel structures prepared by stereolithography using poly (ethylene glycol)/poly (d, l-lactide)-based resins10.1016/j.jconrel.2010.07.111 ↗
58. Preparation and characterization of multi-layered poly (ε-caprolactone)/chitosan scaffolds fabricated with a combination of melt-plotting/in situ plasma treatment and a coating method for hard tissue regeneration10.1039/c3tb21123a ↗
59. Enhancement of bone regeneration through facile surface functionalization of solid freeform fabrication-based three-dimensional scaffolds using mussel adhesive proteins10.1016/j.actbio.2012.03.041 ↗
60. Microsphere-based selective laser sintering for building macroporous bone scaffolds with controlled microstructure and excellent biocompatibility10.1016/j.colsurfb.2015.06.074 ↗
61. Bone tissue engineering using polycaprolactone scaffolds fabricated via selective laser sintering10.1016/j.biomaterials.2004.11.057 ↗
62. Surface modification of polycaprolactone scaffolds fabricated via selective laser sintering for cartilage tissue engineering10.1016/j.msec.2014.04.029 ↗
63. Biomimicry as a route to new materials: What kinds of lessons are useful?10.1098/rsta.2009.0010 ↗
64. Microengineered physiological biomimicry: Organs-on-chips10.1039/c2lc40089h ↗
65. Tissue engineering and developmental biology: Going biomimetic10.1089/ten.2006.12.3265 ↗
66. Müller, M., Becher, J., Schnabelrauch, M., and Zenobi-Wong, M. (2015). Nanostructured Pluronic hydrogels as bioinks for 3D bioprinting. Biofabrication, 7.10.1088/1758-5090/7/3/035006 ↗
67. 3D bioprinting of low-concentration cell-laden gelatin methacrylate (GelMA) bioinks with a two-step cross-linking strategy10.1021/acsami.7b16059 ↗
68. Roehm, K.D., and Madihally, S.V. (2017). Bioprinted chitosan-gelatin thermosensitive hydrogels using an inexpensive 3D printer. Biofabrication, 10.10.1088/1758-5090/aa96dd ↗
69. Polyelectrolyte gelatin-chitosan hydrogel optimized for 3D bioprinting in skin tissue engineering10.18063/IJB.2016.01.009 ↗
70. Demirtaş, T.T., Irmak, G., and Gümüşderelioğlu, M. (2017). A bioprintable form of chitosan hydrogel for bone tissue engineering. Biofabrication, 9.10.1088/1758-5090/aa7b1d ↗
71. 3D bioprinting and its innovative approach for biomedical applications10.1002/mco2.194 ↗
72. Developmental biology and tissue engineering10.1002/bdrc.20109 ↗
73. Jakab, K., Norotte, C., Marga, F., Murphy, K., Vunjak-Novakovic, G., and Forgacs, G. (2010). Tissue engineering by self-assembly and bio-printing of living cells. Biofabrication, 2.10.1088/1758-5082/2/2/022001 ↗
74. Thermo-responsive culture dishes allow the intact harvest of multilayered keratinocyte sheets without dispase by reducing temperature10.1089/10763270152436517 ↗
75. A noninvasive transfer system for polarized renal tubule epithelial cell sheets using temperature-responsive culture dishes10.22203/eCM.v010a03 ↗
76. Printing and prototyping of tissues and scaffolds10.1126/science.1226340 ↗
77. A novel concept for scaffold-free vessel tissue engineering: Self-assembly of microtissue building blocks10.1016/j.jbiotec.2010.03.002 ↗
78. Organ printing: Tissue spheroids as building blocks10.1016/j.biomaterials.2008.12.084 ↗
79. Endothelial tubes assemble from intracellular vacuoles in vivo10.1038/nature04923 ↗
80. Design and prototyping of a chip-based multi-micro-organoid culture system for substance testing, predictive to human (substance) exposure10.1016/j.jbiotec.2010.02.001 ↗
81. Reconstituting organ-level lung functions on a chip10.1126/science.1188302 ↗
82. Functional 3D neural mini-tissues from printed gel-based bioink and human neural stem cells10.1002/adhm.201600095 ↗
83. A microfluidic platform for probing small artery structure and function10.1039/c004675b ↗
84. Sodupe-Ortega, E., Sanz-Garcia, A., Pernia-Espinoza, A., and Escobedo-Lucea, C. (2018). Accurate Calibration in Multi-Material 3D Bioprinting for Tissue Engineering. Materials, 11.10.3390/ma11081402 ↗
85. 3D bioprinting of vascularized, heterogeneous cell-laden tissue constructs10.1002/adma.201305506 ↗
86. 25th anniversary article: Engineering hydrogels for biofabrication10.1002/adma.201302042 ↗
87. Current advances and future perspectives in extrusion-based bioprinting10.1016/j.biomaterials.2015.10.076 ↗
88. Extrusion-Based 3D Printing of Poly(propylene fumarate) in a Full-Factorial Design10.1021/acsbiomaterials.6b00026 ↗
89. Development of 3D bioprinting: From printing methods to biomedical applications
90. Duarte Campos, D.F., Blaeser, A., Weber, M., Jakel, J., Neuss, S., Jahnen-Dechent, W., and Fischer, H. (2013). Three-dimensional printing of stem cell-laden hydrogels submerged in a hydrophobic high-density fluid. Biofabrication, 5.10.1088/1758-5082/5/1/015003 ↗
91. Visser, J., Peters, B., Burger, T.J., Boomstra, J., Dhert, W.J., Melchels, F.P., and Malda, J. (2013). Biofabrication of multi-material anatomically shaped tissue constructs. Biofabrication, 5.10.1088/1758-5082/5/3/035007 ↗
92. Pantani, R., and Turng, L.S. (2015). Manufacturing of advanced biodegradable polymeric components. J. Appl. Polym. Sci., 132.10.1002/app.42889 ↗
93. Inkjet printing biomaterials for tissue engineering: Bioprinting10.1179/1743280414Y.0000000040 ↗
94. Lorber, B., Hsiao, W.-K., Hutchings, I.M., and Martin, K.R. (2013). Adult rat retinal ganglion cells and glia can be printed by piezoelectric inkjet printing. Biofabrication, 6.10.1088/1758-5082/6/1/015001 ↗
95. DNA deposition through laser induced forward transfer10.1016/j.bios.2004.08.047 ↗
96. Directed three-dimensional patterning of self-assembled peptide fibrils10.1021/nl072798r ↗
97. Laser printing of pluripotent embryonal carcinoma cells10.1089/107632704323061843 ↗
98. Laser-assisted cell printing: Principle, physical parameters versus cell fate and perspectives in tissue engineering10.2217/nnm.10.14 ↗
99. Laser printing of stem cells for biofabrication of scaffold-free autologous grafts10.1089/ten.tec.2010.0359 ↗
100. Survival and proliferative ability of various living cell types after laser-induced forward transfer10.1089/ten.2005.11.1817 ↗