Fabrication of PVA Coatings Applied to Electrospun PLGA Scaffolds to Prevent Postoperative Adhesions
Source abstract
Abstract
There is currently a demand for anti-adhesive materials that are capable of preventing the formation of intra-abdominal adhesions. In this study, electrospun poly(lactide-co-glycolide) scaffolds were dip-coated in aqueous solutions of polyvinyl alcohol with concentrations of 3 wt.%, 6 wt.% and 9 wt.% to obtain a nontoxic and anti-adhesive biomedical material. The viscosities of the applied 3 wt.%, 6 wt.% and 9 wt.% polyvinyl alcohol solutions were 7.7 mPa∙s, 38.2 mPa∙s and 180.8 mPa∙s, respectively, and increased exponentially. It is shown that increasing the viscosity of the polyvinyl alcohol solution from 6 wt.% to 9 wt.% increases the thickness of the polyvinyl alcohol layer from (3.32 ± 0.97) µm to (8.09 ± 1.43) µm. No pronounced polyvinyl alcohol layer can be observed on samples dip-coated in 3 wt.% PVA solution. Increasing the viscosity of the polyvinyl alcohol solution from 3 wt.% to 9 wt.% increases the mechanical properties of the poly(lactide-co-glycolide) samples by a factor of 1.16–1.45. Cytotoxicity analysis of all samples reveals that none is toxic to 3T3-L1 fibroblast cells. A cell adhesion assay indicates that the anti-adhesion properties increase with increasing viscosity of the polyvinyl alcohol solution and the thickness of the polyvinyl alcohol layer on the poly(lactide-co-glycolide) scaffolds. Fluorescence images of the cells show that as the thickness of the polyvinyl alcohol coating increases, the number of cells decreases, and they do not cover the surface of the samples and form spherical three-dimensional agglomerates. The highest mechanical and anti-adhesion properties are obtained with the poly(lactide-co-glycolide) scaffold sample dip-coated in the 9 wt.% polyvinyl alcohol solution. This is because this sample has the thickest polyvinyl alcohol coating.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Electrospun Nanofibers in Biomedical Applications · Polymer Surface Interaction Studies · Electrophoretic Deposition in Materials Science
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Weinberg Research Center, School of Nuclear Science and Engineering, National Research Tomsk Polytechnic University, 30, Lenin Avenue, 634050 Tomsk, Russia
Research School of Chemistry & Applied Biomedical Sciences, Tomsk Polytechnic University, 634000 Tomsk, Russia
Mental Health Research Institute, Tomsk National Research Medical Center of the Russian Academy of Sciences, Aleutskaya Street, 634014 Tomsk, Russia
Funding
Ministry of Science and Higher Education of the Russian Federation
References (88)
Show source-provided references
1. Fatehi Hassanabad, A., Zarzycki, A.N., Jeon, K., Deniset, J.F., and Fedak, P.W.M. (2021). Post-Operative Adhesions: A Comprehensive Review of Mechanisms. Biomedicines, 9.10.3390/biomedicines9080867 ↗
2. Intra-Abdominal Adhesions
3. Adhesions after Abdominal Surgery: A Systematic Review of the Incidence, Distribution and Severity10.1007/s00595-013-0591-8 ↗
4. Peritoneal Adhesions: Occurrence, Prevention and Experimental Models10.1016/j.actbio.2020.08.036 ↗
5. Advances in Biomaterials for Preventing Tissue Adhesion10.1016/j.jconrel.2017.06.020 ↗
6. An Oxidative Stress-Responsive Electrospun Polyester Membrane Capable of Releasing Anti-Bacterial and Anti-Inflammatory Agents for Postoperative Anti-Adhesion10.1016/j.jconrel.2021.04.017 ↗
7. Potential of a Facile Sandwiched Electrospun Scaffold Loaded with Ibuprofen as an Anti-Adhesion Barrier10.1016/j.msec.2020.111451 ↗
8. Cross-Linked Electrospun Cartilage Acellular Matrix/Poly(Caprolactone-Co-Lactide-Co-Glycolide) Nanofiber as an Antiadhesive Barrier10.1016/j.actbio.2018.05.032 ↗
9. Prevention of Intra-Abdominal Adhesion Using Electrospun PEG/PLGA Nanofibrous Membranes10.1016/j.msec.2017.04.017 ↗
10. Epigallocatechin-3-O-Gallate-Loaded Poly(Lactic-Co-Glycolic Acid) Fibrous Sheets as Anti-Adhesion Barriers10.1166/jbn.2015.2080 ↗
11. Study on Prevention of Postoperative Abdominal Adhesions with PLGA Nanofiber Membrane10.1088/1742-6596/1676/1/012129 ↗
12. Assessment of Antimicrobial Agents, Analgesics, and Epidermal Growth Factors-Embedded Anti-Adhesive Poly(Lactic-Co-Glycolic Acid) Nanofibrous Membranes: In Vitro and in Vivo Studies10.2147/IJN.S318083 ↗
13. Bazgir, M., Saeinasab, M., Zhang, W., Zhang, X., Min Tsui, K., Maasoumi Sarvestani, A., Nawaz, S., Coates, P., Youseffi, M., and Elies, J. (2022). Investigation of Cell Adhesion and Cell Viability of the Endothelial and Fibroblast Cells on Electrospun PCL, PLGA and Coaxial Scaffolds for Production of Tissue Engineered Blood Vessel. J. Funct. Biomater., 13.10.3390/jfb13040282 ↗
14. El Khatib, M., Mauro, A., Wyrwa, R., Di Mattia, M., Turriani, M., Di Giacinto, O., Kretzschmar, B., Seemann, T., Valbonetti, L., and Berardinelli, P. (2020). Fabrication and Plasma Surface Activation of Aligned Electrospun PLGA Fiber Fleeces with Improved Adhesion and Infiltration of Amniotic Epithelial Stem Cells Maintaining Their Teno-Inductive Potential. Molecules, 25.10.3390/molecules25143176 ↗
15. Mechanical Properties of Electrospun Fibers—A Critical Review10.1002/adem.202100153 ↗
16. Surface Modification of Electrospun PLGA Scaffold with Collagen for Bioengineered Skin Substitutes10.1016/j.msec.2016.04.073 ↗
17. Prevention Strategies of Postoperative Adhesion in Soft Tissues by Applying Biomaterials: Based on the Mechanisms of Occurrence and Development of Adhesions
18. Effects of PLGA Coating on Biological and Mechanical Behaviors of Tissue Engineering Scaffolds10.1016/j.porgcoat.2023.107406 ↗
19. Improvement in Mechanical and Biological Performance of Porous Baghdadite Scaffold by Applying Chitosan Coating10.1007/s00339-021-04475-z ↗
20. Recent Advances in PVA-Polysaccharide Based Hydrogels and Electrospun Nanofibers in Biomedical Applications: A Review10.1016/j.ijbiomac.2021.08.002 ↗
21. A Transparent Hydrophilic Anti-Biofouling Coating for Intraocular Lens Materials Prepared by “Bridging” of the Intermediate Adhesive Layer10.1039/D1TB00065A ↗
22. Cross-Linked Poly(Vinyl Alcohol)/Citric Acid Electrospun Fibers Containing Imidazolium Ionic Liquid with Enhanced Antiadhesive and Antimicrobial Properties10.1016/j.matchemphys.2024.129087 ↗
23. A Functional PVA Aerogel-Based Membrane Obtaining Sutureability through Modified Electrospinning Technology and Achieving Promising Anti-Adhesion Effect after Cardiac Surgery
24. Peritoneum-Inspired Janus Porous Hydrogel with Anti-Deformation, Anti-Adhesion, and Pro-Healing Characteristics for Abdominal Wall Defect Treatment10.1002/adma.202108992 ↗
25. Huang, Y., Zheng, J., Zeng, G., Xu, H., Lv, Y., Liang, X., Jin, L., and Jiang, X. (2024). Chitosan-Crosslinked Polyvinyl Alcohol Anti-Swelling Hydrogel Designed to Prevent Abdominal Wall Adhesion. Mater. Today Bio, 24.10.1016/j.mtbio.2023.100931 ↗
26. Effect of Incorporating Cellulose Nanocrystals from Corncob on the Tensile, Thermal and Barrier Properties of Poly(Vinyl Alcohol) Nanocomposites10.1155/2013/289641 ↗
27. Effect of TiO2 Nanoparticles on Barrier and Mechanical Properties of PVA Films
28. Damodaran, V.B., and Murthy, N.S. (2016). Bio-Inspired Strategies for Designing Antifouling Biomaterials. Biomater. Res., 20.10.1186/s40824-016-0064-4 ↗
29. A Synergistic Antibacterial Effect between Terbium Ions and Reduced Graphene Oxide in a Poly(Vinyl Alcohol)–Alginate Hydrogel for Treating Infected Chronic Wounds10.1039/C8TB02679C ↗
30. Recent Advance in Surface Modification for Regulating Cell Adhesion and Behaviors10.1515/ntrev-2020-0076 ↗
31. Construction of Hierarchical Functionalized Black Phosphorus with Polydopamine: A Novel Strategy for Enhancing Flame Retardancy and Mechanical Properties of Polyvinyl Alcohol10.1016/j.cej.2020.126212 ↗
32. Zwitterionic-Phosphonate Block Polymer as Anti-Fouling Coating for Biomedical Metals10.1007/s12598-021-01807-z ↗
33. Visible-Light Photocatalytic Degradation of Water-Soluble Polyvinyl Alcohol in Aqueous Solution by Cu2O@TiO2: Optimization of Conditions, Mechanisms and Toxicity Analysis10.1016/j.jenvman.2023.118054 ↗
34. Spin-Coated Freestanding Films for Biomedical Applications10.1039/D1TB00233C ↗
35. Multifunctional Cold Spray Coatings for Biological and Biomedical Applications: A Review10.1016/j.progsurf.2022.100654 ↗
36. Effect of Different Solvents in Solvent Casting of Porous PLA Scaffolds—In Biomedical and Tissue Engineering Applications10.1166/jbt.2015.1243 ↗
37. Deposition of Poly(Methyl Methacrylate) and Composites Containing Bioceramics and Bioglass by Dip Coating Using Isopropanol-Water Co-Solvent10.1016/j.porgcoat.2020.105883 ↗
38. Influence of Spin Coating and Dip Coating with Gelatin/Hydroxyapatite for Bioresorbable Mg Alloy Orthopedic Implants: In Vitro and In Vivo Studies10.1021/acsbiomaterials.2c01122 ↗
39. Applications of Biopolymer Coatings in Biomedical Engineering
40. Dip-Coating for Fibrous Materials: Mechanism, Methods and Applications10.1007/s10971-016-4197-7 ↗
41. Badaraev, A.D., Tran, T.-H., Drozd, A.G., Plotnikov, E.V., Dubinenko, G.E., Kozelskaya, A.I., Rutkowski, S., and Tverdokhlebov, S.I. (2023). Effect of PLGA Concentration in Electrospinning Solution on Biocompatibility, Morphology and Mechanical Properties of Nonwoven Scaffolds. Technologies, 11.10.3390/technologies11050137 ↗
42. Three-Dimensional Scaffolds for Tissue Engineering Applications: Role of Porosity and Pore Size10.1089/ten.teb.2012.0437 ↗
43. Imaging the Coil-to-Globule Conformational Transition of a Weak Polyelectrolyte by Tuning the Polyelectrolyte Charge Density10.1021/nl034912l ↗
44. Kemme, M., and Heinzel-Wieland, R. (2018). Quantitative Assessment of Antimicrobial Activity of PLGA Films Loaded with 4-Hexylresorcinol. J. Funct. Biomater., 9.10.3390/jfb9010004 ↗
45. Effect of Annealing on Structural, Morphological, Electrical and Optical Studies of Nickel Oxide Thin Films
46. A Comparative Study of the Crystallinity of Polyetheretherketone by Using Density, DSC, XRD, and Raman Spectroscopy Techniques10.1016/j.polymertesting.2020.106878 ↗
47. Ningrum, D.R., Hanif, W., Mardhian, D.F., and Asri, L.A.T.W. (2023). In Vitro Biocompatibility of Hydrogel Polyvinyl Alcohol/Moringa Oleifera Leaf Extract/Graphene Oxide for Wound Dressing. Polymers, 15.10.3390/polym15020468 ↗
48. Soluplus®-Based Dissolving Microarray Patches Loaded with Colchicine: Towards a Minimally Invasive Treatment and Management of Gout10.1039/D2BM01068B ↗
49. Ndlovu, S.P., Ngece, K., Alven, S., and Aderibigbe, B.A. (2021). Gelatin-Based Hybrid Scaffolds: Promising Wound Dressings. Polymers, 13.10.3390/polym13172959 ↗
50. Kassotis, C.D., Masse, L., Kim, S., Schlezinger, J.J., Webster, T.F., and Stapleton, H.M. (2017). Characterization of Adipogenic Chemicals in Three Different Cell Culture Systems: Implications for Reproducibility Based on Cell Source and Handling. Sci. Rep., 7.10.1038/srep42104 ↗
51. Anti-Adhesion Effect of Composite Film Materials Based on Glycoluril-Modified Sodium Carboxymethyl Cellulose10.17691/stm2021.13.1.04 ↗
52. Core/Shell Microencapsulation of Indomethacin/Paracetamol by Co-Axial Electrohydrodynamic Atomization10.1016/j.matdes.2017.09.052 ↗
53. Bastidas, J.G., Maurmann, N., da Silveira, M.R., Ferreira, C.A., and Pranke, P. (2020). Development of Fibrous PLGA/Fibrin Scaffolds as a Potential Skin Substitute. Biomed. Mater., 15.10.1088/1748-605X/aba086 ↗
54. Effect of Ultrasonication Duration of Polyvinyl Alcohol (PVA) Gel on Characterizations of PVA Film10.1016/j.jmrt.2019.12.078 ↗
55. Structural, Optical, Opto-Thermal and Thermal Properties of ZnS–PVA Nanofluids Synthesized through a Radiolytic Approach10.3762/bjnano.6.55 ↗
56. Light at the Interface: The Potential of Attenuated Total Reflection Infrared Spectroscopy for Understanding Heterogeneous Catalysis in Water10.1039/c0cs00014k ↗
57. Functional and Structural Modification of Polyvinyl Alcohol/Carbon Nanotubes Composite Fibers10.1016/j.rinma.2024.100603 ↗
58. Freire, T.F., Quinaz, T., Fertuzinhos, A., Quyền, N.T., de Moura, M.F.S.M., Martins, M., Zille, A., and Dourado, N. (2021). Thermal, Mechanical and Chemical Analysis of Poly(Vinyl Alcohol) Multifilament and Braided Yarns. Polymers, 13.10.3390/polym13213644 ↗
59. Li, K., Li, P., Jia, Z., Qi, B., Xu, J., Kang, D., Liu, M., and Fan, Y. (2018). Enhanced Fluorescent Intensity of Magnetic-Fluorescent Bifunctional PLGA Microspheres Based on Janus Electrospraying for Bioapplication. Sci. Rep., 8.10.1038/s41598-018-34856-z ↗
60. Song, B., Cao, Y., Wang, L., Shen, Y., and Qian, X. (2023). Properties and Structure of Thermoplastic Polyvinyl Alcohol/Polyamide Sea-Island Fibers. Polymers, 15.10.3390/polym15092071 ↗
61. Preparation and Characterization of Polyvinyl Alcohol-polyethylene Oxide-carboxymethyl Cellulose Blend Membranes10.1002/app.37665 ↗
62. Enhancement of Functional Properties by Blending Cocoon Extracted Antheraea Mylitta Silk Fibroin with Polyvinyl Alcohol for Applications in Biomedical Field10.1002/app.51913 ↗
63. Surface Modification of PVA Thin Film by Nonthermal Atmospheric Pressure Plasma for Antifogging Property10.1063/1.5100776 ↗
64. Understanding the Role of Dip-Coating Process Parameters in the Mechanical Performance of Polymer-Coated Bioglass Robocast Scaffolds10.1016/j.jmbbm.2016.08.004 ↗
65. The Influence of Polymer Concentrations on the Structure and Mechanical Properties of Porous Polycaprolactone-Coated Hydroxyapatite Scaffolds10.1016/j.apsusc.2010.02.053 ↗
66. Safety Evaluation of Surgical Materials by Cytotoxicity Testing10.1007/s10047-008-0429-0 ↗
67. Development of Poly(D,L-Lactic-Co-Glycolic Acid) Films Coated with Biomembrane-Mimicking Polymers for Anti-Adhesion Activity10.1016/j.msec.2020.111780 ↗
68. Poly(Vinyl Alcohol) Membranes for Adhesion Prevention10.1002/jbm.b.30007 ↗
69. Evaluation of Hemocompatibility and Endothelialization of Hybrid Poly(Vinyl Alcohol) (PVA)/Gelatin Polymer Films10.1002/jbm.b.32977 ↗
70. Polyvinyl Alcohol and Pectin Blended Films: Preparation, Characterization, and Mesenchymal Stem Cells Attachment10.1002/jbm.a.37130 ↗
71. Cytotoxicity of Glutaraldehyde Crosslinked Collagen/Poly(Vinyl Alcohol) Films Is by the Mechanism of Apoptosis10.1002/jbm.10145 ↗
72. Wei, D., Huang, Y., Liang, M., Ren, P., Tao, Y., Xu, L., Zhang, T., Ji, Z., and Zhang, Q. (2023). Polypropylene Composite Hernia Mesh with Anti-Adhesion Layer Composed of PVA Hydrogel and Liposomes Drug Delivery System. Colloids Surf. B Biointerfaces, 223.10.1016/j.colsurfb.2023.113159 ↗
73. Polymer Hydration and Stiffness at Biointerfaces and Related Cellular Processes10.1016/j.nano.2017.08.012 ↗
74. Surface Hydration: Principles and Applications toward Low-Fouling/Nonfouling Biomaterials10.1016/j.polymer.2010.08.022 ↗
75. On the Structure of the First Hydration Layer on NaCl(100): Role of Hydrogen Bonding10.1063/1.2743411 ↗
76. Hydrophilic Polymer-Based Anti-Biofouling Coatings: Preparation, Mechanism, and Durability10.1016/j.cis.2020.102264 ↗
77. Interaction of Human Mesenchymal Stem Cells with Soft Nanocomposite Hydrogels Based on Polyethylene Glycol and Dendritic Polyglycerol10.1002/adfm.201905200 ↗
78. Advances in Polyethylene Glycol-Based Materials in Peritoneal Adhesions10.1166/jbt.2024.3366 ↗
79. Surface Hydration and Antifouling Activity of Zwitterionic Polymers10.1021/acs.langmuir.2c00512 ↗
80. An “Iceberg” Coating Preserves Bulk Hydration Dynamics in Aqueous PEG Solutions10.1021/acs.jpcb.7b08030 ↗
81. Hydration Layer Structure of Biofouling-Resistant Nanoparticles10.1021/acsnano.8b06856 ↗
82. Molecular Level Studies on Interfacial Hydration of Zwitterionic and Other Antifouling Polymers in Situ10.1016/j.actbio.2016.02.030 ↗
83. In Vivo Safety Assessment, Biodistribution and Toxicology of Polyvinyl Alcohol Microneedles with 160-Day Uninterruptedly Applications in Mice10.1016/j.ejpb.2021.01.005 ↗
84. Surgical Adhesions: A Timely Update, a Great Challenge for the Future10.1016/j.jmig.2006.07.013 ↗
85. Acid Catalysed Cross-Linking of Poly Vinyl Alcohol (PVA) by Glutaraldehyde: Effect of Crosslink Density on the Characteristics of PVA Membranes Used in Single Chambered Microbial Fuel Cells10.1039/C5RA16068E ↗
86. Crosslinked Poly (Vinyl Alcohol): Structural, Optical and Mechanical Properties10.1016/j.surfin.2021.101198 ↗
87. Atlan, M., Simon-Yarza, T., Ino, J.M., Hunsinger, V., Corté, L., Ou, P., Aid-Launais, R., Chaouat, M., and Letourneur, D. (2018). Design, Characterization and in Vivo Performance of Synthetic 2 Mm-Diameter Vessel Grafts Made of PVA-Gelatin Blends. Sci. Rep., 8.10.1038/s41598-018-25703-2 ↗
88. Charged Group-Modified Poly(Vinyl Alcohol) Hydrogels: Preparation and Antibacterial Property10.1016/j.reactfunctpolym.2020.104635 ↗