Experimental Analysis of Stress Shielding Effects in Screw Spacers Placed in Porcine Spinal Tissue
Source abstract
Abstract
Bone cortical tissues reorganize and remodel in response to tensile forces acting on them, while compressive forces cause atrophy. However, implants support most of the payload. Bones do not regenerate, and stress shielding occurs. The aim is to analyze the biomechanical behavior of a lumbar cage to study the implant’s stress shielding. The ASTM E-9 standard was used with the necessary adjustments to perform compression tests on lumbar and thoracic porcine spinal vertebrae. Twelve cases were analyzed: six with the metal prosthesis and six with the PEEK implant. A mathematical model based on the Hertz contact theory is proposed to assess the stress shielding for endoprosthesis used in spine pathologies. The lumbar spacer (screw) helps to reduce the stress shielding effect due to the ACME thread. The best interspinous spacer is the PEEK screw. It does not embed in bone. The deformation capability increases by 11.5% and supports 78.6 kg more than a system without any interspinous spacer.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Spine and Intervertebral Disc Pathology · Orthopaedic implants and arthroplasty · Musculoskeletal pain and rehabilitation
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Instituto Politécnico Nacional, Escuela Superior de Ingeniería Mecánica y Eléctrica, Unidad Zacatenco, Sección de Estudios de Posgrado e Investigación, Ciudad de México 07738, Mexico
Funding
Consejo Nacional de Humanidades, Ciencia y Tecnología (CONAHCyT) · Instituto Politécnico Nacional
References (48)
Show source-provided references
1. Numerical Assessment of Interspinous Spacers for Lumbar Spine10.3390/prosthesis5030065 ↗
2. Finite element study on the influence of pore size and structure on stress shielding effect of additive manufactured spinal Cage10.1080/10255842.2021.1970142 ↗
3. Global, regional, and national incidence, prevalence, and years lived with disability for 354 diseases and injuries for 195 countries and territories, 1990–2017: A systematic analysis for the Global Burden of Disease Study 201710.1016/S0140-6736(18)32279-7 ↗
4. The relationship between balance performance, lumbar extension strength, trunk extension endurance, and pain in participants with chronic low back pain, and those without10.1016/j.clinbiomech.2018.01.023 ↗
5. Mechanisms of low back pain: A guide for diagnosis and therapy10.12688/f1000research.8105.2 ↗
6. Is the combination of exercise therapy and health education more effective than usual medical care in the prevention of non-specific back pain? A systematic review with meta-analysis10.1080/07853890.2022.2140453 ↗
7. Functional Outcome after Spinal Meningioma Surgery10.31616/asj.2021.0201 ↗
8. A retrospective comparative study of postoperative sagittal balance in isthmic L5–S1 spondylolisthesis using single segment or two-segment pedicle screw fixation10.1186/s12891-022-05098-y ↗
9. Comparison of Fusion Rate and Functional Outcome Between Local Cancellous Bone Plus Demineralized Bone Matrix and Local Bone in 1-Level Posterior Lumbar Interbody Fusion10.1097/BSD.0000000000001330 ↗
10. Custom-made trabecular titanium implants for the treatment of lumbar degenerative discopathy via ALIF/XLIF techniques: Rationale for use and preliminary results10.1007/s00586-019-06191-y ↗
11. Back pain outcomes after minimally invasive anterior lumbar interbody fusion: A systematic review10.3171/2020.6.FOCUS20385 ↗
12. A critical review on the biomechanical study of cervical interbody fusion cage10.1016/j.medntd.2021.100070 ↗
13. Trabecular bone of precocials at birth; Are they prepared to run for the wolf(f)?10.1002/jmor.20548 ↗
14. A CBCT atlas of buccal cortical bone thickness in interradicular spaces10.2319/082214-593.1 ↗
15. Analysis of stress shielding reduction in bone fracture fixation implant using functionally graded materials10.1016/j.compstruct.2023.117262 ↗
16. Does stress shielding after radial head arthroplasty affect functional outcomes?10.1007/s00590-022-03315-x ↗
17. A newly designed personalized interbody fusion cage and its biomechanical analysis10.1007/s10409-023-23047-x ↗
18. Stress shielding in periprosthetic bone following a total knee replacement: Effects of implant material, design and alignment10.1016/j.medengphy.2016.09.018 ↗
19. Single-parameter mechanical design of a 3D-printed octet truss topological scaffold to match natural cancellous bones10.1016/j.matdes.2021.109986 ↗
20. Analysis of different geometrical features to achieve close-to-bone stiffness material properties in medical device: A feasibility numerical study10.1016/j.cmpb.2022.106875 ↗
21. Effect of porosity variation strategy on the performance of functionally graded Ti-6Al-4V scaffolds for bone tissue engineering10.1016/j.matdes.2018.07.064 ↗
22. A topology strategy to reduce stress shielding of additively manufactured porous metallic biomaterials10.1016/j.ijmecsci.2021.106331 ↗
23. Martinez-Marquez, D., Delmar, Y., Sun, S., and Stewart, R.A. (2020). Exploring Macroporosity of Additively Manufactured Titanium Metamaterials for Bone Regeneration with Quality by Design: A Systematic Literature Review. Materials, 13.10.3390/ma13214794 ↗
24. Mechanical performance of porous biomimetic intervertebral body fusion devices: An in vitro biomechanical study10.1186/s13018-023-03556-4 ↗
25. Influence of pedicle screw thread width and recovery time after surgery on fixation strength10.1515/cdbme-2021-2192 ↗
26. Additively manufactured controlled porous orthopedic joint replacement designs to reduce bone stress shielding: A systematic review10.1186/s13018-022-03492-9 ↗
27. Ramirez, O., Torres-San-Miguel, C.h.R., Ceccarelli, M., and Urriolagoitia-Calderon, G. (2019). Experimental characterization of an osteosynthesis implant. Advances in Mechanism and Machine Science, Proceedings of the 15th IFToMM World Congress on Mechanism and Machine Science, Krakow, Poland, 30 June–4 July 2019, Springer.10.1007/978-3-030-20131-9_6 ↗
28. Cortical bone thickness and bone mass density in L2 vertebra, a comparison study with L3 and L4 measurements
29. Importance of the pig as a human biomedical model10.1126/scitranslmed.abd5758 ↗
30. Rise of the Pigs: Utilization of the Porcine Model to Study Musculoskeletal Biomechanics and Tissue Engineering During Skeletal Growth10.1089/ten.tec.2017.0227 ↗
31. (2019). Standard Test Methods of Compression Testing of Metallic Materials at Room Temperature. Standard No. ASTM E9-19.
32. Hernández-Salazar, C.A., Chamorro, C.E., and González-Estrada, O.A. (2024). Characterization of Pig Vertebrae under Axial Compression Integrating Radiomic Techniques and Finite Element Analysis. Inventions, 9.10.3390/inventions9020036 ↗
33. Özkaya, N., Leger, D., Goldsheyder, D., and Nordin, M. (2017). Fundamentals of Biomechanics, Springer International Publishing.10.1007/978-3-319-44738-4 ↗
34. Hamill, J., Knutzen, K.M., and Derrick, T.R. (2015). Biomechanical Basis of Human Movement, Wolters Kluwer. [4th ed.].
35. Boresi, A.P., and Schmidt, R.J. (2003). Advanced Mechanics of Materials, John Wiley & Sons. [6th ed.].
36. Minimally invasive anterior, lateral, and oblique lumbar interbody fusion: A literature review10.21037/atm.2018.03.24 ↗
37. Outcomes of Minimally Invasive Oblique Lumbar Interbody Fusion in Patients with Lumbar Degenerative Disease with Rheumatoid Arthritis10.1055/s-0038-1676301 ↗
38. Biomechanical effects of an oblique lumbar interbody fusion combined with posterior augmentation: A finite element analysis10.1186/s12891-022-05553-w ↗
39. Design and Biomechanical Evaluation of a Bidirectional Expandable Cage for Oblique Lateral Interbody Fusion10.1016/j.wneu.2023.10.003 ↗
40. Biomechanical Analysis of Different Lumbar Interspinous Process Devices: A Finite Element Study10.1016/j.wneu.2019.04.051 ↗
41. Al Zoubi, N.F., Tarlochan, F., Mehboob, H., and Jarrar, F. (2022). Design of Titanium Alloy Femoral Stem Cellular Structure for Stress Shielding and Stem Stability: Computational Analysis. Appl. Sci., 12.10.3390/app12031548 ↗
42. Heterogeneous modeling based prosthesis design with porosity and material variation10.1016/j.jmbbm.2018.07.029 ↗
43. Self-exothermic esterification-crosslinking of bio-polymer/graphene composite for application in interbody fusion cage10.1557/s43579-022-00296-0 ↗
44. Biomechanical analysis of a new lumbar interspinous device with optimized topology10.1007/s11517-017-1767-y ↗
45. Topology optimization and dynamic characteristic evaluation of W-shaped interspinous process device10.1080/10255842.2022.2129968 ↗
46. Xiao, Z., Wu, L., Wu, W., Tang, R., Dai, J., and Zhu, D. (2023). Multi-Scale Topology Optimization of Femoral Stem Structure Subject to Stress Shielding Reduce. Materials, 16.10.3390/ma16083151 ↗
47. Stress shielding effect after total hip arthroplasty varies between combinations of stem design and stiffness—A comparing biomechanical finite element analysis10.1007/s00264-023-05825-7 ↗
48. Ceddia, M., Trentadue, B., De Giosa, G., and Solarino, G. (2023). Topology Optimization of a Femoral Stem in Titanium and Carbon to Reduce Stress Shielding with the FEM Method. J. Compos. Sci., 7.10.20944/preprints202307.0758.v1 ↗