journal article·2024-04-11Open access

Biomechanical Effects of Ti-Base Abutment Height on the Dental Implant System: A Finite Element Analysis

Miguel Beltrán-Guijarro, Esteban Pérez-Pevida, David Chávarri-Prado, Alejandro Estrada-Martínez, Markel Diéguez-Pereira, Fernando Sánchez-Lasheras, Aritza Brizuela-Velasco

Abstract

This study aims to analyse, using a finite element analysis, the effects of Ti-base abutment height on the distribution and magnitude of transferred load and the resulting bone microstrain in the bone-implant system. A three-dimensional bone model of the mandibular premolar section was created with an implant placed in a juxta-osseous position. Three prosthetic models were designed: a 1 mm-high titanium-base (Ti-base) abutment with an 8 mm-high cemented monolithic zirconia crown was designed for model A, a 2 mm-high Ti-base abutment with a 7 mm-high crown for model B, and a 3 mm-high abutment with a 6 mm-high crown for model C. A static load of 150 N was applied to the central fossa at a six-degree angle with respect to the axial axis of the implant to evaluate the magnitude and distribution of load transfer and microstrain. The results showed a trend towards a direct linear association between the increase in the height of the Ti-base abutments and the increase in the transferred stress and the resulting microstrain to both the prosthetic elements and the bone/implant system. An increase in transferred stress and deformation of all elements of the system, within physiological ranges, was observed as the size of the Ti-base abutment increased.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Dental Implant Techniques and Outcomes · Bone Tissue Engineering Materials · Dental materials and restorations

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Surgery, Faculty of Medicine, University of Salamanca, 37007 Salamanca, Spain

Department of Surgery, Faculty of Sports and Health Sciences, University of Zaragoza, 22006 Huesca, Spain

Faculty of Health Sciences, Miguel de Cervantes European University, 47012 Valladolid, Spain

Department of Mathematics, University Institute of Space Sciences and Technologies of Asturias (ICTEA), University of Oviedo, 33006 Oviedo, Spain

References (54)

Show source-provided references
1. CAD/CAM-based implant abutments
2. Effect of CAD/CAM Abutment Height and Cement Type on the Retention of Zirconia Crowns10.1097/ID.0000000000000811 ↗
3. Prosthetic Abutment Height is a Key Factor in Peri-implant Marginal Bone Loss10.1177/0022034513519800 ↗
4. Influence of abutment height on peri-implant marginal bone loss: A systematic review and meta-analysis10.1016/j.prosdent.2018.10.003 ↗
5. Mechanical failures of dental implants and supported prostheses: A systematic review10.1016/j.jobcr.2023.02.009 ↗
6. It is all about peri-implant tissue health10.1111/prd.12407 ↗
7. The long-term efficacy of currently used dental implants: A review and proposed criteria of success
8. Wolff’s law and bone’s structural adaptations to mechanical usage: An overview for clinicians
9. Cerrolaza, M. (2006). El Método de los Elementos Finitos para Ingeniería y Ciencias Aplicadas: Teoría y Programas, Consejo de Desarrollo Científico y Humanístico, UCV.
10. Application of finite element analysis in implant dentistry: A review of the literature10.1067/mpr.2001.115251 ↗
11. Finite element analysis in implant dentistry: State of the art and future directions10.1016/j.dental.2023.04.002 ↗
12. Elleuch, S., Jrad, H., Wali, M., and Dammak, F. (2023). Finite element analysis of the effect of porosity on biomechanical behaviour of functionally graded dental implant. Proc. Inst. Mech. Eng. Part E J. Process Mech. Eng.10.1177/09544089231197857 ↗
13. A three-dimensional, finite-element analysis of bone around dental implants in an edentulous human mandible10.1016/0003-9969(93)90185-O ↗
14. Comparison of stress distribution in surrounding bone during insertion of dental implants on four implant threads under the effect of an impact: A finite element study
15. Lekholm, U., Zarb, G.A., and Albrektsson, T. (1985). Patient Selection and Preparation. Tissue Integrated Prostheses, Quintessence Publishing Co., Inc.
16. A comparative evaluation of mandibular finite element models with different lengths and elements for implant biomechanics10.1111/j.1365-2842.1998.00244.x ↗
17. Bone characteristics and implant stability
18. Biomechanical finite element analysis of a single implant threaded in anterior and posterior regions of maxilla bone10.4103/ijdr.IJDR_510_18 ↗
19. Oliveira, H., Brizuela Velasco, A., Ríos-Santos, J.V., Sánchez Lasheras, F., Lemos, B.F., Gil, F.J., Carvalho, A., and Herrero-Climent, M. (2020). Effect of Different Implant Designs on Strain and Stress Distribution under Non-Axial Loading: A Three-Dimensional Finite Element Analysis. Int. J. Environ. Res. Public. Health, 17.10.3390/ijerph17134738 ↗
20. Numerical analysis of a dental implant system in three-dimension10.1016/S0965-9978(01)00056-4 ↗
21. Finite element analysis of the stresses around fixtures in various reconstructed mandibular models—Part II (effect of horizontal load)10.1016/S1010-5182(03)00029-5 ↗
22. Stress analysis and factor of safety in three dental implant systems by finite element analysis10.1016/j.sdentj.2022.08.006 ↗
23. Finite Element Analysis of Stress in Bone and Abutment-Implant Interface under Static and Cyclic Loadings
24. The use of finite element analysis to model bone-implant contact with basal implants10.1016/j.tripleo.2007.12.005 ↗
25. The efects of bone density and crestal cortical bone thickness on micromotion and peri-implant bone strain distribution in an immediately loaded implant: A nonlinear finite element analysis10.5051/jpis.2016.46.3.152 ↗
26. Three-dimensional stress distribution around a dental implant at different stages of interface development10.1177/00220345830620021401 ↗
27. Implant-bone interface stress distribution in immediately loaded implants of di_erent diameters: A three-dimensional finite element analysis10.1111/j.1532-849X.2009.00453.x ↗
28. Crestal module design optimization of dental implants: Finite element analysis and in vivo studies10.1007/s10856-019-6291-1 ↗
29. Biological and biomechanical perspectives of normal dental oclusion10.1016/j.ics.2005.07.033 ↗
30. Occlusal considerations for implant restorations in the partially edentolous Patient
31. The influence of functional forces on the biomechanics of implant supported prostheses—A review10.1016/S0300-5712(02)00065-9 ↗
32. Munro, R.G. (2002). Elastic Moduli Data for Polycrystalline Ceramics, National Institute of Standards and Technology. NISTIR 6853.10.6028/NIST.IR.6853 ↗
33. Bone mass and the mechanostat: A proposal10.1002/ar.1092190104 ↗
34. Prados-Privado, M., Martínez-Martínez, C., Gehrke, S.A., and Prados-Frutos, J.C. (2020). Influence of Bone Definition and Finite Element Parameters in Bone and Dental Implants Stress: A Literature Review. Biology, 9.10.3390/biology9080224 ↗
35. Stress in an implant-supported unitary fixed partial prosthesis with different materials in the first lower premolar through finite elements
36. Pérez-Pevida, E., Brizuela-Velasco, A., Chávarri-Prado, D., Jiménez-Garrudo, A., Sánchez-Lasheras, F., Solaberrieta-Méndez, E., Diéguez-Pereira, M., Fernández-González, F.J., Dehesa-Ibarra, B., and Monticelli, F. (2016). Biomechanical Consequences of the Elastic Properties of Dental Implant Alloys on the Supporting Bone: Finite Element Analysis. Biomed Res. Int., 2016.10.1155/2016/1850401 ↗
37. A comparison of three finite element models of an edentulous mandible provided with implants10.1111/j.1365-2842.1993.tb01598.x ↗
38. Biologic width around titanium implants. A histometric analysis of the implanto-gingival junction around unloaded and loaded nonsubmerged implants in the canine mandible10.1902/jop.1997.68.2.186 ↗
39. Stress distribution in the abutment and retention screw of a single implant supporting a prosthesis with platform switching10.11607/jomi.2813 ↗
40. Three-dimensional finite element analysis of stress- distribution around single tooth implants as a function of bony support, prosthesis type, and loading during function10.1016/S0022-3913(96)90442-4 ↗
41. Influence of marginal bone resorption on stress around an implant—A three-dimensional finite element analysis10.1111/j.1365-2842.2004.01413.x ↗
42. Design optimization of implant geometrical characteristics enhancing primary stability using FEA of stress distribution around dental prosthesis10.1080/10255842.2020.1867112 ↗
43. Biomaterials and biomechanics of oral and maxillofacial implants: Current status and future developments
44. Evaluación mecánica sobre el efecto de cargas oclusales en la conexión interfaz ósea, comparando 4 diseños de implantes para carga inmediata en aleaciones Ti6Al4V y TiNbZr (Tiadyne™) por análisis de elementos finitos
45. Influence of Occlusal Stress on Implant Abutment Junction and Implant Bone Interface: A Finite Element Analysis Study
46. The influence of static and dynamic loading on marginal bone reactions around osseointegrated implants: An animal experimental study10.1034/j.1600-0501.2001.012003207.x ↗
47. De Oliveira Rigotti, R.L., Tardelli, J.D.C., Dos Reis, A.C., and Da Valente, M.L.C. (2023). Oral and Maxillofacial Surgery, Springer.
48. Reaction of crestal bone around implants depending on mucosal tissue thick- ness. A 1-year prospective clinical study
49. Influence of thin mucosal tissues on crestal bone stability around implants with platform switching: A 1-year pilot study10.1016/j.joms.2009.08.018 ↗
50. Biomechanical Evaluation of Stress Distribution in Equicrestal and Sub-crestally Placed, Platform-Switched Morse Taper Dental Implants in D3 Bone: Finite Element Analysis
51. Effects of prosthesis materials and prosthesis splinting on peri-implant bone stress around implants in poor- quality bone: A numeric analysis
52. Influence of lubricant on screw preload and stresses in a finite element model for a dental implant10.1016/j.prosdent.2013.10.016 ↗
53. Effects of tightening torque on screw stress and formation of implant-abutment microgaps: A finite element analysis10.1016/j.prosdent.2020.11.026 ↗
54. Effect of Bone Remodeling on Dental Implant Fatigue Limit Predicted Using 3D Finite Element Analysis