Crack Propagation and Fatigue Performance of Partial Posterior Indirect Restorations: An Extended Finite Element Method Study
Source abstract
Abstract
Dental ceramics are susceptible to slow, progressive crack growth after cyclic loading. The purpose of this study was to investigate the progressive patterns of cracks in two different types of CAD/CAM ceramic materials used with three different partial posterior indirect restoration (PPIR) designs and to determine the materials’ failure risk using a fatigue test. Standard initial cracks were formed in Standard Tessellation Language (STL) files prepared for three different PPIRs. The materials chosen were monolithic lithium disilicate (LS) and polymer-infiltrated ceramic networks (PICNs). The extended finite element method (XFEM) was applied, and the fatigue performance was examined by applying a 600 N axial load. The cracks propagated the most in onlay restorations, where the highest displacement was observed. In contrast, the most successful results were observed in overlay restorations. Overlay restorations also showed better fatigue performance. LS materials exhibited more successful results than PICN materials. LS materials, which can be used in PPIRs, yield better results compared to PICN materials. While inlay restorations demonstrated relatively successful results, overlay and onlay restorations can be specified as the most and the least successful PPIR types, respectively.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Dental materials and restorations · Dental Implant Techniques and Outcomes · Dental Research and COVID-19
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Prosthodontics, Faculty of Dentistry, Necmettin Erbakan University, Konya 42090, Turkey
Faculty of Dentistry, Necmettin Erbakan University, Konya 42090, Turkey
Department of Prosthodontics, Faculty of Dentistry, Karamanoğlu Mehmet Bey University, Karaman 70000, Turkey
References (50)
Show source-provided references
1. An Alternative Method to Reduce Polymerization Shrinkage in Direct Posterior Composite Restorations10.14219/jada.archive.2002.0055 ↗
2. Optimization of Large MOD Restorations: Composite Resin Inlays vs. Short Fiber-Reinforced Direct Restorations10.1016/j.dental.2018.01.004 ↗
3. Effect of Different Composite Restorations on the Cuspal Deflection of Premolars Restored with Different Insertion Techniques—An In Vitro Study
4. Stress Distribution in Carbon-Post Applied with Different Composite Core Materials: A Three-Dimensional Finite Element Analysis10.1080/01694243.2017.1304172 ↗
5. Fatigue Resistance and Crack Propensity of Large MOD Composite Resin Restorations: Direct versus CAD/CAM Inlays10.1016/j.dental.2012.11.013 ↗
6. A Comparison of Stresses in Molar Teeth Restored with Inlays and Direct Restorations, Including Polymerization Shrinkage of Composite Resin and Tooth Loading during Mastication10.1016/j.dental.2014.11.016 ↗
7. Effect of Different Indirect Composite Onlay and Core Materials on Fracture Resistance of Endodontically Treated Maxillary Premolars10.2186/jpr.JPR_D_22_00049 ↗
8. The Effect of a Fiber Reinforced Cavity Configuration on Load Bearing Capacity and Failure Mode of Endodontically Treated Molars Restored with CAD/CAM Resin Composite Overlay Restorations10.1016/j.jdent.2015.06.012 ↗
9. Volumetric Measurements of Removed Tooth Structure Associated with Various Preparation Designs10.11607/ijp.3221 ↗
10. Tooth Structure Removal Associated with Various Preparation Designs for Anterior Teeth10.1067/mpr.2002.124094 ↗
11. Zarone, F., Di Mauro, M.I., Ausiello, P., Ruggiero, G., and Sorrentino, R. (2019). Current Status on Lithium Disilicate and Zirconia: A Narrative Review. BMC Oral Health, 19.10.1186/s12903-019-0838-x ↗
12. de Carvalho, A.B.G., de Andrade, G.S., Tribst, J.P.M., Grassi, E.D.A., Ausiello, P., Saavedra, G.d.S.F.A., Bressane, A., de Melo, R.M., and Borges, A.L.S. (2021). Mechanical Behavior of Different Restorative Materials and Onlay Preparation Designs in Endodontically Treated Molars. Materials, 14.10.3390/ma14081923 ↗
13. Influence of Material Selection on the Risk of Inlay Fracture during Pre-Cementation Functional Occlusal Tapping10.1016/j.dental.2010.09.002 ↗
14. Comba, A., Baldi, A., Carossa, M., Michelotto Tempesta, R., Garino, E., Llubani, X., Rozzi, D., Mikonis, J., Paolone, G., and Scotti, N. (2022). Post-Fatigue Fracture Resistance of Lithium Disilicate and Polymer-Infiltrated Ceramic Network Indirect Restorations over Endodontically-Treated Molars with Different Preparation Designs: An In-Vitro Study. Polymers, 14.10.3390/polym14235084 ↗
15. Mechanical and Biocompatible Properties of Polymer-Infiltrated-Ceramic-Network Materials for Dental Restoration10.1007/s40145-019-0341-5 ↗
16. Fractographic Features of Glass-Ceramic and Zirconia-Based Dental Restorations Fractured during Clinical Function10.1111/eos.12127 ↗
17. Effects of Composite Resin Core Level and Periodontal Pocket Depth on Crack Propagation in Endodontically Treated Teeth: An Extended Finite Element Method Study10.1016/j.prosdent.2022.05.003 ↗
18. Influence of Substrate Design for in Vitro Mechanical Testing
19. Mechanisms and Risk Factors for Fracture Predilection in Endodontically Treated Teeth10.1111/j.1601-1546.2006.00201.x ↗
20. Thermally Induced Fracture for Core-Veneered Dental Ceramic Structures10.1016/j.actbio.2013.05.009 ↗
21. Influence of the Preparation Design on the Survival Probability of Occlusal Veneers10.1016/j.dental.2022.02.003 ↗
22. Occlusal Stress Distribution and Remaining Crack Propagation of a Cracked Tooth Treated with Different Materials and Designs: 3D Finite Element Analysis10.1016/j.dental.2021.01.020 ↗
23. Subcritical Crack Growth in Porcelains, Glass-Ceramics, and Glass-Infiltrated Alumina Composite for Dental Restorations10.1007/s10856-008-3667-z ↗
24. Influence of Preparation Design and Ceramic Thicknesses on Fracture Resistance and Failure Modes of Premolar Partial Coverage Restorations10.1016/S0022-3913(13)60374-1 ↗
25. Static and Fatigue Mechanical Behavior of Three Dental CAD/CAM Ceramics10.1016/j.jmbbm.2016.01.023 ↗
26. Survival of Resin Infiltrated Ceramics under Influence of Fatigue10.1016/j.dental.2015.12.001 ↗
27. Interpenetrating Network Ceramic-Resin Composite Dental Restorative Materials10.1016/j.dental.2015.09.009 ↗
28. Fatigue Resistance of Monolithic CAD/CAM Ceramic Crowns on Human Premolars10.1016/j.ceramint.2016.07.029 ↗
29. An Abaqus Implementation of the Extended Finite Element Method10.1016/j.engfracmech.2008.10.015 ↗
30. Fracture Behavior of Inlay and Onlay Fixed Partial Dentures—An in-Vitro Experimental and XFEM Modeling Study10.1016/j.jmbbm.2016.01.035 ↗
31. A Fatigue Damage Model of Composite Materials10.1016/j.ijfatigue.2009.02.027 ↗
32. A New Theory to Predict Cumulative Fatigue Damage in Fiberglass Reinforced Plastics
33. Gulec, L., and Ulusoy, N. (2017). Effect of Endocrown Restorations with Different CAD/CAM Materials: 3D Finite Element and Weibull Analyses. Biomed Res. Int., 2017.10.1155/2017/5638683 ↗
34. Influence of Preparation Design and Restorative Material on Fatigue and Fracture Strength of Restored Maxillary Premolars10.2341/20-032-L ↗
35. Fracture Strength of Teeth Restored with Ceramic Inlays and Overlays10.1590/S0103-64402009000200010 ↗
36. Fracture Resistance of Prepared Premolars Restored with Bonded New Lab Composite and All-Ceramic Inlay/Onlay Restorations: Laboratory Study10.1111/jerd.12364 ↗
37. Fracture Resistance of Premolars Restored with Inlay and Onlay Ceramic Restorations and Luted with Two Different Agents10.1016/j.jpor.2010.07.001 ↗
38. Fracture Resistance of Premolars Restored with Partial Ceramic Restorations and Submitted to Two Different Loading Stresses10.2341/05-11 ↗
39. Resistance against Fracture in Teeth Managed by Root Canal Treatment on Restoring with Onlays, Inlays, and Endocrowns: A Comparative Analysis10.5005/jp-journals-10024-3123 ↗
40. Effect of Inlays, Onlays and Endocrown Cavity Design Preparation on Fracture Resistance and Fracture Mode of Endodontically Treated Teeth: An In Vitro Study10.1111/jopr.13294 ↗
41. Comparative Evaluation of Clinical Performance of Ceramic and Resin Inlays, Onlays, and Overlays: A Systematic Review and Meta Analysis10.4103/jcd.jcd_184_22 ↗
42. Fracture Resistance of Bonded Ceramic Overlay Restorations Prepared in Various Designs10.1038/s41598-022-21167-7 ↗
43. Phenomena and Mechanisms of Crack Propagation in Glass-Ceramics10.1016/j.jmbbm.2007.11.005 ↗
44. Velho, H.C., Dapieve, K.S., Rocha Pereira, G.K., Fraga, S., Valandro, L.F., and Venturini, A.B. (2020). Accelerated Loading Frequency Does Not Influence the Fatigue Behavior of Polymer Infiltrated Ceramic Network or Lithium Disilicate Glass-Ceramic Restorations. J. Mech. Behav. Biomed. Mater., 110.10.1016/j.jmbbm.2020.103905 ↗
45. The Fracture Toughness Behaviour of Interpenetrating Phase Composites10.1016/S0020-7403(01)00016-9 ↗
46. Load-Bearing Capacity of Various CAD/CAM Monolithic Molar Crowns under Recommended Occlusal Thickness and Reduced Occlusal Thickness Conditions10.4047/jap.2017.9.6.423 ↗
47. de Carvalho, M.A., Lazari-Carvalho, P.C., Del Bel Cury, A.A., and Magne, P. (J. Prosthet. Dent., 2022). Fatigue and Failure Analysis of Restored Endodontically Treated Maxillary Incisors without a Dowel or Ferrule, J. Prosthet. Dent., online ahead of print.10.1016/j.prosdent.2021.07.007 ↗
48. Dartora, G., Rocha Pereira, G.K., Varella de Carvalho, R., Zucuni, C.P., Valandro, L.F., Cesar, P.F., Caldas, R.A., and Bacchi, A. (2019). Comparison of Endocrowns Made of Lithium Disilicate Glass-Ceramic or Polymer-Infiltrated Ceramic Networks and Direct Composite Resin Restorations: Fatigue Performance and Stress Distribution. J. Mech. Behav. Biomed. Mater., 100.10.1016/j.jmbbm.2019.103401 ↗
49. Adhesive Restoration of Anterior Endodontically Treated Teeth: Influence of Post Length on Fracture Strength10.1007/s00784-013-0978-3 ↗
50. Abraha, H.M., Iriarte-Diaz, J., Ross, C.F., Taylor, A.B., and Panagiotopoulou, O. (2019). The Mechanical Effect of the Periodontal Ligament on Bone Strain Regimes in a Validated Finite Element Model of a Macaque Mandible. Front. Bioeng. Biotechnol., 7.10.3389/fbioe.2019.00269 ↗