Factors Affecting the Color Change of Monolithic Zirconia Ceramics: A Narrative Review
Source abstract
Abstract
Zirconia restorations are widely used in dentistry due to their high esthetic expectations and physical durability. However, zirconia’s opaque white color can compromise esthetics. Therefore, zirconia is often veneered with porcelain, but fractures may occur in the veneer layer. Monolithic zirconia restorations, which do not require porcelain veneering and offer higher translucency, have been developed to address this issue. Zirconia exists in three main crystal phases: monoclinic, tetragonal, and cubic. Metal oxides such as yttrium are added to stabilize the tetragonal phase at room temperature. 3Y-TZP contains 3 mol% yttrium and provides high mechanical strength but has poor optical properties. Recently, 4Y-PSZ and 5Y-PSZ ceramics, which offer better optical properties but lower mechanical strength, have been introduced. This review examines the factors affecting the color change in monolithic zirconia ceramics. These factors are categorized into six main groups: cement type and color, restoration thickness, substrate color, sintering, aging, and zirconia type. Cement type and color are crucial in determining the final shade, especially in thin restorations. Increased restoration thickness reduces the influence of the substrate color while the sintering temperature and process improve optical properties. These findings emphasize the importance of material selection and application processes in ensuring esthetic harmony in zirconia restorations. This review aims to bridge gaps in the literature by providing valuable insights that guide clinicians in selecting and applying zirconia materials to meet both esthetic and functional requirements in restorative dentistry.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Dental materials and restorations · Pigment Synthesis and Properties · Dental Erosion and Treatment
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Prosthodontics, Faculty of Dentistry, Gazi University, Ankara 06490, Türkiye
References (87)
Show source-provided references
1. Use of ultra-translucent monolithic zirconia as esthetic dental restorative material: A narrative review10.3390/ceramics7010017 ↗
2. Zirconia use in dentistry—manfacturing and properties
3. Optical properties of pre-colored dental monolithic zirconia ceramics10.1016/j.jdent.2016.10.001 ↗
4. Development and characterization of ultra-high translucent zirconia using new manufacturing technology10.4012/dmj.2022-243 ↗
5. Ceramics overview10.1038/s41415-022-4242-6 ↗
6. Advances in zirconia-based dental materials: Properties, classification, applications, and future prospects10.1016/j.jdent.2024.105111 ↗
7. Alqutaibi, A.Y., Ghulam, O., Krsoum, M., Binmahmoud, S., Taher, H., Elmalky, W., and Zafar, M.S. (2022). Revolution of current dental zirconia: A comprehensive review. Molecules, 27.10.3390/molecules27051699 ↗
8. Ban, S. (2021). Classification and properties of dental zirconia as implant fixtures and superstructures. Materials, 14.10.3390/ma14174879 ↗
9. A Review on Translucent Zirconia
10. Clinical factors affecting the translucency of monolithic Y-TZP ceramics10.1007/s10266-019-00446-2 ↗
11. State of the art of zirconia for dental applications10.1016/j.dental.2007.05.007 ↗
12. Zirconia and its novel compositions: What do clinicians need to know?
13. Kui, A., Manziuc, M., Petruțiu, A., Buduru, S., Labuneț, A., Negucioiu, M., and Chisnoiu, A. (2023). Translucent zirconia in fixed prosthodontics—An integrative overview. Biomedicines, 11.10.3390/biomedicines11123116 ↗
14. Color agreement between try-in paste and resin cement: Effect of thickness and regions of ultra-translucent multilayered zirconia veneers10.15171/joddd.2019.010 ↗
15. Strength and phase transformation of different zirconia types after chairside adjustment10.1016/j.prosdent.2022.06.015 ↗
16. Vardhaman, S., Borba, M., Kaizer, M.R., Kim, D.K., and Zhang, Y. (2024). Optical and mechanical properties of the multi-transition zones of a translucent Zirconia. J. Esthet. Restor. Dent., 1–8.10.1111/jerd.13319 ↗
17. Arellano Moncayo, A.M., Peñate, L., Arregui, M., Giner-Tarrida, L., and Cedeño, R. (2023). State of the art of different zirconia materials and their indications according to evidence-based clinical performance: A narrative review. Dent. J., 11.10.3390/dj11010018 ↗
18. Thickness and yttria percentage influence the fracture resistance of laminate veneer zirconia restorations10.1002/cre2.658 ↗
19. Current classification of zirconia in dentistry: An updated review10.7717/peerj.15669 ↗
20. Color in zirconia-based restorations and related factors: A literature review10.1111/jopr.12740 ↗
21. Factors affecting the translucency of monolithic zirconia ceramics: A review from materials science perspective10.4012/dmj.2019-098 ↗
22. Color difference thresholds in dentistry10.1111/jerd.12149 ↗
23. Jouhar, R., Ahmed, M.A., and Khurshid, Z. (2022). An overview of shade selection in clinical dentistry. Appl. Sci., 12.10.3390/app12146841 ↗
24. Performance assessment of dental shade guides10.1016/j.jdent.2009.02.005 ↗
25. Repeatability of color-measuring devices
26. Visual and digital tooth shade selection methods, related effective factors and conditions, and their accuracy and precision: A literature review10.1111/jerd.12816 ↗
27. Aesthetic and functional rehabilitation for dentogingival asymmetry using zirconia restorations
28. Effect of thickness, cement shade, and coffee thermocycling on the optical properties of zirconia reinforced lithium silicate ceramic10.1111/jerd.12808 ↗
29. Comba, A., Paolone, G., Baldi, A., Vichi, A., Goracci, C., Bertozzi, G., and Scotti, N. (2022). Effects of substrate and cement shade on the translucency and color of CAD/CAM lithium-disilicate and zirconia ceramic materials. Polymers, 14.10.3390/polym14091778 ↗
30. Influence of resin cement shade on the color and translucency of zirconia crowns10.4317/jced.56425 ↗
31. Mekled, S., Elwazeer, S., Jurado, C.A., White, J., Faddoul, F., Afrashtehfar, K.I., and Fischer, N.G. (2023). Ultra-translucent zirconia laminate veneers: The influence of restoration thickness and stump tooth-shade. Materials, 16.10.3390/ma16083030 ↗
32. Optical properties of translucent zirconia: A review of the literature10.2478/ebtj-2019-0005 ↗
33. Zirconia cementation: A systematic review of the most currently used protocols10.2174/0118742106300869240621074459 ↗
34. Influence of sandblasting granulometry and resin cement composition on microtensile bond strength to zirconia ceramic for dental prosthetic frameworks10.1016/j.jdent.2012.09.013 ↗
35. Recent trends in surface treatment methods for bonding composite cement to zirconia: A review
36. Does the internal surface treatment technique for enhanced bonding affect the color, transparency, and surface roughness of ultra-transparent zirconia?10.1007/s00784-024-05847-4 ↗
37. Optical properties of zirconia ceramics for esthetic dental restorations: A systematic review10.1016/j.prosdent.2017.07.009 ↗
38. Effect of resin cement and ceramic thickness on final color of laminate veneers: An in vitro study10.1016/S0022-3913(13)60039-6 ↗
39. Influence of type of cement on the color and translucency of monolithic zirconia10.1016/j.prosdent.2016.05.001 ↗
40. The effect of restoration thickness and resin cement shade on the color and translucency of a high-translucency monolithic zirconia10.1016/j.prosdent.2018.11.002 ↗
41. Effect of cement type on the color attributes of a zirconia ceramic10.4047/jap.2016.8.6.449 ↗
42. Final colour of ultra translucent multilayered zirconia veneers, effect of thickness, and resin cement shade10.1155/2022/2555797 ↗
43. Influence of resin cement on color stability when luting lithium disilicate and zirconia restorations
44. Effect of the amount of thickness reduction on color and translucency of dental monolithic zirconia ceramics10.4047/jap.2016.8.1.37 ↗
45. Effects of veneering porcelain thickness and background shade on the shade match of zirconia-based restorations10.15171/joddd.2019.011 ↗
46. Effect of abutment shade, ceramic thickness, and coping type on the final shade of zirconia all-ceramic restorations: In vitro study of color masking ability10.4047/jap.2015.7.5.368 ↗
47. Effect of ceramic thickness and cement type on the color match of high-translucency monolithic zirconia restorations10.11607/ijp.6457 ↗
48. Effects of thickness of different types of high-translucency monolithic multilayer precolored zirconia on color accuracy: An in vitro study10.1016/j.prosdent.2021.07.011 ↗
49. Effect of the shades of background substructures on the overall color of zirconia-based all-ceramic crowns10.4047/jap.2013.5.3.319 ↗
50. Effect of substrate and cement on the final color of zirconia-based all-ceramic crowns10.1111/jerd.12632 ↗
51. Effect of three different core materials on masking ability of a zirconia ceramic
52. Ansarifard, E., Taghva, M., Mosaddad, S.A., and Akhlaghian, M. (2024). The impact of various substrates, ceramic shades, and brands on the ultimate color and masking capacity of highly translucent monolithic zirconia: An in vitro study. Odontology.10.1007/s10266-024-00996-0 ↗
53. Color match of ultra-translucency multilayer zirconia restorations with different designs and backgrounds10.1111/jopr.13700 ↗
54. Evaluation of the effect of different types of abrasive surface treatment before and after zirconia sintering on its structural composition and bond strength with resin cement10.1155/2018/1803425 ↗
55. Color characteristics of high yttrium oxide-doped monochrome and multilayer partially stabilized zirconia upon different sintering parameters
56. Effect of changes in sintering parameters on monolithic translucent zirconia10.1016/j.dental.2014.09.003 ↗
57. Effect of sintering temperature on translucency parameter of zirconia blocks10.4103/1735-3327.359319 ↗
58. Effect of sintering and aging processes on the mechanical and optical properties of translucent zirconia10.1016/j.prosdent.2021.03.024 ↗
59. Optical effect of rapid sintering protocols on different types of zirconia10.1016/j.prosdent.2023.05.001 ↗
60. Yang, F., Zhang, L., Yang, M., Chen, J., and Xing, W. (2024). The effect of deviations in sintering temperature on the translucency and color of multi-layered zirconia. BMC Oral Health, 24.10.1186/s12903-024-04243-4 ↗
61. Giti, R., and Mosallanezhad, S. (2024). Effect of sintering temperature on color stability and translucency of various zirconia systems after immersion in coffee solution. PLoS ONE, 19.10.1371/journal.pone.0313645 ↗
62. Hassan Shohdy, E.I., Sabet, A., Sherif, A.H., and Salah, T. (2024). The effect of speed sintering on the optical properties and microstructure of multi-layered cubic zirconia. J. Prosthodont.10.1111/jopr.13822 ↗
63. Engler, M.L.P.D., Kauling, A.E.C., Silva, J., Rafael, C.F., Liebermann, A., and Volpato, C.A.M. (2025). Influence of sintering temperature and aging on the color and translucency of zirconia. J. Prosthet. Dent.10.1016/j.prosdent.2024.12.022 ↗
64. Effect of sintering technıque on the color coordınates of a translucent zirconium ceramic material
65. Ultra-translucent zirconia processing and aging effect on microstructural, optical, and mechanical properties10.1016/j.dental.2022.02.016 ↗
66. Effect of accelerated aging on dental zirconia-based materials10.1016/j.jmbbm.2016.08.023 ↗
67. Translucency of monolithic and core zirconia after hydrothermal aging10.3109/23337931.2015.1102639 ↗
68. Influence of accelerated aging on the color stability of dental zirconia10.1111/jerd.12239 ↗
69. Translucency of monolithic zirconia after hydrothermal aging: A review of in vitro studies10.1111/jopr.13174 ↗
70. Effect of hydrothermal aging on the optical properties of precolored dental monolithic zirconia ceramics10.1016/j.prosdent.2018.06.021 ↗
71. Effect of low-temperature degradation and sintering protocols on the color of monolithic zirconia crowns with different yttria contents10.4012/dmj.2023-194 ↗
72. Evaluation of the surface roughness and color stability of two types of milled zirconia before and after immersion in alcoholic beverages: An in vitro study
73. Abounassif, F.M., Alfaraj, A., Gadah, T., Yang, C.C., Chu, T.G., and Lin, W.S. (2024). Color stability of precolored and extrinsically colored monolithic multilayered polychromatic zirconia: Effects of surface finishing and aging. J. Prosthodont.10.1111/jopr.13875 ↗
74. Effect of low-temperature degradation treatment on hardness, color, and translucency of single layers of multilayered zirconia10.1016/j.prosdent.2023.01.023 ↗
75. Khanlar, L.N., Salazar Rios, A., Tahmaseb, A., and Zandinejad, A. (2021). Additive Manufacturing of Zirconia Ceramic and Its Application in Clinical Dentistry: A Review. Dent. J., 9.10.3390/dj9090104 ↗
76. Zirconia-based restorations: Literature review
77. Ramezani, M., and Mohd Ripin, Z. (2023). 4D printing in biomedical engineering: Advancements, challenges, and future directions. J. Funct. Biomater., 14.10.3390/jfb14070347 ↗
78. Additive manufacturing technologies for processing zirconia in dental applications
79. 3D-printed versus conventionally milled zirconia for dental clinical applications: Trueness, precision, accuracy, biological and esthetic aspects10.1016/j.jdent.2024.104925 ↗
80. Flexural strength and Weibull characteristics of stereolithography additive manufactured versus milled zirconia10.1016/j.prosdent.2020.01.019 ↗
81. Manufacturing accuracy and volumetric changes of stereolithography additively manufactured zirconia with different porosities10.1016/j.prosdent.2020.06.021 ↗
82. Nakai, H., Inokoshi, M., Nozaki, K., Komatsu, K., Kamijo, S., Liu, H., Shimizubata, M., Minakuchi, S., Van Meerbeek, B., and Vleugels, J. (2021). Additively manufactured zirconia for dental applications. Materials, 14.10.3390/ma14133694 ↗
83. Dimensional accuracy and clinical adaptation of ceramic crowns fabricated with the stereolithography technique10.1016/j.prosdent.2020.02.032 ↗
84. Branco, A.C., Colaço, R., Figueiredo-Pina, C.G., and Serro, A.P. (2023). Recent advances on 3D-printed zirconia-based dental materials: A review. Materials, 16.10.3390/ma16051860 ↗
85. Comparison of optical properties of laminate veneers made of Zolid FX and Katana UTML zirconia and lithium disilicate ceramics
86. Color accuracy of different types of monolithic multilayer precolored zirconia ceramics10.1016/j.prosdent.2020.04.026 ↗
87. Kang, C.M., Peng, T.Y., Wu, Y.A., Hsieh, C.F., Chi, M.C., Wu, H.Y., and Lin, Z.C. (2024). Comparison of optical properties and fracture loads of multilayer monolithic zirconia crowns with different yttria levels. J. Funct. Biomater., 15.10.3390/jfb15080228 ↗