journal article·2024-05-28Open access

Analysis of Gingival Fibroblasts Behaviour in the Presence of 3D-Printed versus Milled Methacrylate-Based Dental Resins—Do We Have a Winner?

Veaceslav Saramet, Miruna S. Stan, Alexandra Ripszky Totan, Ana Maria Cristina Țâncu, Bianca Voicu-Balasea, Dan Sebastian Enasescu, Florentina Rus-Hrincu, Marina Imre

Abstract

Computer-aided design and computer-aided manufacturing (CAD/CAM) techniques are based on either subtractive (milling prefabricated blocks) or additive (3D printing) methods, and both are used for obtaining dentistry materials. Our in vitro study aimed to investigate the behavior of human gingival fibroblasts exposed to methacrylate (MA)-based CAD/CAM milled samples in comparison with that of MA-based 3D-printed samples to better elucidate the mechanisms of cell adaptability and survival. The proliferation of human gingival fibroblasts was measured after 2 and 24 h of incubation in the presence of these samples using a 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide assay, and the membrane integrity was assessed through the lactate dehydrogenase release. The level of reactive oxygen species, expression of autophagy-related protein LC3B-I, and detection of GSH and caspase 3/7 were evaluated by fluorescence staining. The MMP-2 levels were measured using a Milliplex MAP kit. The incubation with MA-based 3D-printed samples significantly reduced the viability, by 16% and 28% from control after 2 and 24 h, respectively. There was a 25% and 55% decrease in the GSH level from control after 24 h of incubation with the CAD/CAM milled and 3D-printed samples, respectively. In addition, higher levels of LC3B-I and MMP-2 were obtained after 24 h of incubation with the MA-based 3D samples compared to the CAD/CAM milled ones. Therefore, our results outline that the MA-CAD/CAM milled samples displayed good biocompatibility during 24-h exposure, while MA-3D resins are proper for short-term utilization (less than 24 h).
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Dental materials and restorations · Oral microbiology and periodontitis research · Endodontics and Root Canal Treatments

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Complete Denture, Faculty of Dental Medicine, “Carol Davila” University of Medicine and Pharmacy, 020021 Bucharest, Romania

Department of Biochemistry and Molecular Biology, Faculty of Biology, University of Bucharest, 91–95 Splaiul Independentei, 050095 Bucharest, Romania

Department of Biochemistry, Faculty of Dental Medicine, “Carol Davila” University of Medicine and Pharmacy, 020021 Bucharest, Romania

The Interdisciplinary Center for Dental Research and Development, Faculty of Dental Medicine, “Carol Davila” University of Medicine and Pharmacy, 17–23 Plevnei Street, 020021 Bucharest, Romania

References (65)

Show source-provided references
1. Adherence of Candida to complete denture surfaces in vitro: A comparison of conventional and CAD/CAM complete dentures10.4047/jap.2017.9.5.402 ↗
2. A comparison of the flexural and impact strengths and flexural Modulus of CAD/CAM and conventional heat-cured polymethyl methacrylate (MA)10.1111/jopr.12926 ↗
3. Can CAD/CAM resin blocks be considered as substitute for conventional resins?10.1016/j.dental.2017.09.003 ↗
4. Vichi, A., Balestra, D., Scotti, N., Louca, C., and Paolone, G. (2023). Translucency of CAD/CAM and 3D Printable Composite Materials for Permanent Dental Restorations. Polymers, 15.10.3390/polym15061443 ↗
5. Chi, M., Li, N., Cui, J., Karlin, S., Rohr, N., Sharma, N., and Thieringer, F.M. (2022). Biomimetic, mussel-inspired surface modification of 3D-printed biodegradable polylactic acid scaffolds with nano-hydroxyapatite for bone tissue engineering. Front. Bioeng. Biotechnol., 10.10.3389/fbioe.2022.989729 ↗
6. Knowledge domain and innovation trends concerning medical 3D printing for craniomaxillofacial surgery applications: A 30-year bibliometric and visualized analysis10.1177/27528464231170964 ↗
7. Do CAD/CAM dentures really release less monomer than conventional dentures?10.1007/s00784-016-1961-6 ↗
8. Characterization of the double bond conversion of acrylic resins for 3D printing of dental prostheses
9. Elution behavior of a 3D-printed, milled and conventional resin-based occlusal splint material10.1016/j.dental.2021.01.024 ↗
10. Cytotoxicity of 3D-printed, milled, and conventional oral splint resins to L929 cells and human gingival fibroblasts10.1002/cre2.592 ↗
11. DNA-damage, cell-cycle arrest and apoptosis induced in BEAS-2B cells by 2-hydroxyethyl methacrylate (HEMA)10.1016/j.mrgentox.2011.04.011 ↗
12. Degree of conversion in denture base materials for varied polymerization techniques10.1046/j.1365-2842.2000.00536.x ↗
13. Light-curing units, polymerization, and clinical implications
14. Effect of post-polymerization heat-treatments on degree of conversion, leaching residual MA and in vitro cytotoxicity of autopolymerizing acrylic repair resin10.1016/j.dental.2011.08.007 ↗
15. Comparison of residual monomer loss from cold-cure orthodontic acrylic resins processed by different polymerization techniques10.1179/1465313313Y.0000000078 ↗
16. The detection and estimation of residual monomer in polymethyl methacrylate10.1177/00220345560350010901 ↗
17. Marigo, L., Nocca, G., Fiorenzano, G., Callà, C., Castagnola, R., Cordaro, M., Paolone, G., and Sauro, S. (2019). Influences of different air-inhibition coatings on monomer release, microhardness, and color stability of two composite materials. Biomed. Res. Int., 2019.10.1155/2019/4240264 ↗
18. The stability of methacrylate biomaterials when enzyme challenged: Kinetic and systematic evaluations10.1002/1097-4636(20011215)57:4<522::AID-JBM1198>3.0.CO;2-9 ↗
19. The influence of oral bacteria on the surfaces of resin-based dental restorative materials—An in vitro study10.1111/j.1875-595X.1999.tb00527.x ↗
20. Hygroscopic and hydrolytic effects in dental polymer networks10.1016/j.dental.2005.05.005 ↗
21. Dental restorative biomaterials induce glutathione depletion in cultured human gingival fibroblast: Protective effect of N-acetyl cysteine10.1002/1097-4636(20000905)51:3<469::AID-JBM22>3.0.CO;2-B ↗
22. Apoptosis induced by the monomers HEMA and TEGDMA involves formation of ROS and differential activation of the MAP-kinases p38, JNK and ERK10.1016/j.dental.2005.11.037 ↗
23. Fibroblast activation in cancer: When seed fertilizes soil10.1007/s00441-016-2467-x ↗
24. Kowalczuk, M. (2020). Intrinsically biocompatible polymer systems. Polymers, 12.10.3390/polym12020272 ↗
25. Revisiting the definition of biocompatibility
26. A pore way to heal and regenerate: 21st century thinking on biocompatibility10.1093/rb/rbw006 ↗
27. Key terminology in biomaterials and biocompatibility10.1016/j.cobme.2019.02.004 ↗
28. (2009). Biological Evaluation of Medical Splint—Part 5: Tests for In Vitro Cytotoxicity (Standard No. ISO 10993–5:2009).
29. Current status and applications of additive manufacturing in dentistry: A literature-based review10.1016/j.jobcr.2019.04.004 ↗
30. Poiana, I.R., Dobre, R., Popescu, R.I., Pituru, S.M., and Bucur, A. (2023). Utility of Cone-Beam Computed Tomography in the Detection of Low Bone Mass-A Systematic Review. J. Clin. Med., 12.10.3390/jcm12185890 ↗
31. Markovic, J., Mora, N.J., Broseta, A.M., Gimeno, A., de-la-Concepción, N., Viña, J., and Pallardó, F.V. (2009). The depletion of nuclear glutathione impairs cell proliferation in 3t3 fibroblasts. PLoS ONE, 4.10.1371/journal.pone.0006413 ↗
32. Morphological features of cell death
33. Genetic and cellular toxicology of dental resin monomers10.1177/154405910608501001 ↗
34. Molecular toxicology of substances released from resin-based dental restorative materials10.3390/ijms10093861 ↗
35. Nitric oxide as a modulator of apoptosis10.1016/j.canlet.2004.10.021 ↗
36. Comparative analysis of leaching residual monomer and biological effects of four types of conventional and CAD/CAM dental polymers: An in vitro study10.1007/s00784-021-04271-2 ↗
37. Autophagy and the integrated stress response10.1016/j.molcel.2010.09.023 ↗
38. Ornatowski, W., Lu, Q., Yegambaram, M., Garcia, A.E., Zemskov, E.A., Maltepe, E., Fineman, J.R., Wang, T., and Black, S.M. (2020). Complex interplay between autophagy and oxidative stress in the development of pulmonary disease. Redox Biol., 36.10.1016/j.redox.2020.101679 ↗
39. Caspases: The executioners of apoptosis10.1042/bj3260001 ↗
40. Caspase-3: Structure, function, and biotechnological aspects10.1002/bab.2233 ↗
41. HEMA but not TEGDMA induces autophagy in human gingival fibroblasts10.3389/fphys.2015.00275 ↗
42. Metabolic control of autophagy10.1016/j.cell.2014.11.006 ↗
43. Autophagy: Molecular machinery for self-eating10.1038/sj.cdd.4401765 ↗
44. Autophagy as a modulator of cell death machinery10.1038/s41419-020-2724-5 ↗
45. The dual role of autophagy under hypoxia-involvement of interaction between autophagy and apoptosis10.1007/s10495-015-1110-8 ↗
46. Diomede, F., Tripodi, D., Trubiani, O., and Pizzicannella, J. (2019). HEMA effects on autophagy mechanism in human dental pulp stem cells. Materials, 12.10.3390/ma12142285 ↗
47. Mitochondrial membrane permeabilization in cell death10.1152/physrev.00013.2006 ↗
48. Tokar, T., and Ulicny, J. (2013). The mathematical model of the Bcl-2 family mediated MOMP regulation can perform a non-trivial pattern recognition. PLoS ONE, 8.10.1371/journal.pone.0081861 ↗
49. TEGDMA-induced toxicity in human fibroblasts is associated with early and drastic glutathione depletion with subsequent production of oxygen reactive species10.1002/jbm.a.10600 ↗
50. Stimulation of glutathione depletion, ROS production and cell cycle arrest of dental pulp cells and gingival epithelial cells by HEMA10.1016/j.biomaterials.2004.03.021 ↗
51. Cytotoxic effects of resin components on cultured mammalian fibroblasts10.1177/00220345910700111201 ↗
52. Cytotoxic effects of acrylates and methacrylates: Relationships of monomer structures and cytotoxicity10.1002/(SICI)1097-4636(19971215)37:4<517::AID-JBM10>3.0.CO;2-5 ↗
53. Inhibition of phosphatidylinositol 3-kinase amplifies TEGDMA-induced apoptosis in primary human pulp cells10.1177/154405910408300909 ↗
54. NF-kappaB protection against apoptosis induced by HEMA10.1177/154405910408301103 ↗
55. Cell toxicity of methacrylate monomers-the role of glutathione adduct formation10.1002/jbm.a.34652 ↗
56. Gamma-glutamyl transpeptidase alteration as a biomarker of oxidative stress in patients with human papillomavirus lesions following topical treatment with sinecatechins
57. Oxidative stress and autophagy: The clash between damage and metabolic needs10.1038/cdd.2014.150 ↗
58. Glutathione depletion induces ferroptosis, autophagy, and premature cell senescence in retinal pigment epithelial cells10.1038/s41419-018-0794-4 ↗
59. Glutathione depletion induces spermatogonial cell autophagy10.1002/jcb.25178 ↗
60. Evaluation of functional dynamics during osseointegration and regeneration associated with oral implants10.1111/j.1600-0501.2009.01826.x ↗
61. Matrix metalloproteinases and periodontal diseases10.1111/odi.12159 ↗
62. Matrix metalloproteinases regulate neutrophil-endothelial cell adhesion through generation of endothelin-1[1-32]10.1096/fj.01-0178com ↗
63. Monocyte and neutrophil adhesion to matrix proteins is selectively enhanced in the presence of inflammatory mediators10.1046/j.1365-3083.1996.d01-296.x ↗
64. Adsorption of matrix metalloproteinases onto biomedical polymers: A new aspect in biological acceptance10.1163/156856208783227631 ↗
65. Mediation of biomaterial-cell interactions by adsorbed proteins: A review10.1089/ten.2005.11.1 ↗