journal article·2022-09-15Open access

Bone Abrasive Machining: Influence of Tool Geometry and Cortical Bone Anisotropic Structure on Crack Propagation

Paweł Zawadzki, Rafał Talar

Abstract

The abrasive machining of cortical tissue is used in many arthroplasties and craniofacial surgery procedures. However, this method requires further research due to the processes’ complexity and the tissue’s composite structure. Therefore, studies were carried out to assess the impact of grid geometry and the anisotropic structure of bone tissue on the cutting process and crack propagation. The analysis was performed based on an orthogonal cutting in three directions. The grain shape has been simplified, and the cutting forces, crack path and surface quality were monitored. The results indicate that a depth of cut at 100–25 µm allows the most accurate cutting control. A transverse cutting direction results in the greatest surface irregularity: Iz = 17.7%, Vvc = 3.29 mL/m2 and df = 5.22 µm and generates the most uncontrolled cracks. Maximum fracture force values of FF > 80 N were generated for d = 175 µm. For d < 5 µm, no cracks or only slight penetration occurs. A positive γ provides greater repeatability and crack control. Negative γ generates penetrating cracks and uncontrolled material damage. The individual types of cracks have a characteristic course of changes in Fx. The clearance angle did not affect the crack propagation.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Orthopedic Surgery and Rehabilitation · Endodontics and Root Canal Treatments · Orthopaedic implants and arthroplasty

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Faculty of Mechanical Engineering, Poznan University of Technology, Maria Sklodowska-Curie Square 5, 60-965 Poznan, Poland

Funding

subsidy for the maintenance and development of young scientists (SBMN) at the Faculty of Mechanical Engineering of the Poznań University of Technology

References (50)

Show source-provided references
1. Overview of Methods to Quantify Invasiveness of Surgical Approaches in Orthopedic Surgery—A Scoping Review10.3389/fsurg.2021.771275 ↗
2. Hip Resection Arthroplasty10.2106/JBJS.RVW.M.00060 ↗
3. Cost-Effectiveness Analysis of the Most Common Orthopaedic Surgery Procedures: Knee Arthroscopy and Knee Anterior Cruciate Ligament Reconstruction10.1016/j.arthro.2011.06.001 ↗
4. Dahotre, N.B., and Joshi, S.S. (2016). Machining of Bone and Hard Tissue, Springer.10.1007/978-3-319-39158-8 ↗
5. Thermal Damage Done to Bone by Burring and Sawing With and Without Irrigation in Knee Arthroplasty
6. Machining-induced thermal damage in cortical bone: Necrosis and micro-mechanical integrity10.1016/j.matdes.2020.109215 ↗
7. Advances in the fracture mechanics of cortical bone10.1016/0021-9290(87)90025-X ↗
8. Fracture toughening mechanism of cortical bone: An experimental and numerical approach10.1016/j.jmbbm.2011.02.012 ↗
9. An interface damage model that captures crack propagation at the microscale in cortical bone using XFEM10.1016/j.jmbbm.2018.09.045 ↗
10. Crack propagation in cortical bone is affected by the characteristics of the cement line: A parameter study using an XFEM interface damage model10.1007/s10237-019-01142-4 ↗
11. On chip formation mechanism in orthogonal cutting of bone10.1016/j.ijmachtools.2015.12.004 ↗
12. Mechanism of material removal in orthogonal cutting of cortical bone10.1016/j.jmbbm.2020.103618 ↗
13. A study of the bone machining process—Orthogonal cutting10.1016/0021-9290(74)90051-7 ↗
14. Orthogonal Machining of Bone10.1115/1.3426202 ↗
15. Analysis of isotropic and composite laminated plates and shells using a differential quad-rature hierarchical finite element method10.1016/j.compstruct.2018.08.095 ↗
16. Free vibration analysis of variable stiffness composite laminated beams and plates by novel hierarchical differential quadrature finite elements10.1016/j.compstruct.2021.114364 ↗
17. A robust Bézier based solution for nonlinear vibration and post-buckling of random checkerboard graphene nano-platelets reinforced composite beams10.1016/j.compstruct.2019.01.041 ↗
18. Micro-Finite Element Model to Investigate the Mechanical Stimuli in Scaffolds Fabricated via Space Holder Technique for Cancellous Bone
19. McNamara, L. (2011). Bone as a Material. Comprehensive Biomaterials, Elsevier.10.1016/B978-0-08-055294-1.00068-4 ↗
20. Load distribution and the predictive power of morphological indices in the distal radius and tibia by high resolution peripheral quantitative computed tomography10.1016/j.bone.2007.02.029 ↗
21. Cortical and trabecular bone contribute strength to the osteopenic distal radius10.1002/jor.1100120210 ↗
22. Prediction of fracture load at different skeletal sites by geometric properties of the cortical shell10.1002/jbmr.5650110921 ↗
23. Age and Gender Related Differences in the Geometric Properties and Biomechanical Significance of Intra-Cortical Porosity in the Distal Radius and Tibia10.1359/jbmr.091104 ↗
24. The role of cortical bone and its microstructure in bone strength10.1093/ageing/afl081 ↗
25. Incompatible mechanical properties in compact bone10.1016/j.jtbi.2004.07.013 ↗
26. Fatigue microcracks that initiate fracture are located near elevated intracortical po-rosity but not elevated mineralization10.1016/j.jbiomech.2014.06.022 ↗
27. James, E.N., Hanna, C., and Nair, L.S. (2015). Nanobiomaterials for Tissue Engineering Applications. Stem Cell Biology and Tissue Engineering in Dental Sciences, Academic Press.10.1016/B978-0-12-397157-9.00018-7 ↗
28. Lipids and Collagen Matrix Restrict the Hydraulic Permeability Within the Porous Compartment of Adult Cortical Bone10.1007/s10439-009-9858-z ↗
29. The Role of Water Compartments in the Material Properties of Cortical Bone10.1007/s00223-015-9977-5 ↗
30. Bovine Bone Processing for Biofilter Application10.4028/www.scientific.net/MSF.727-728.727 ↗
31. Osteonal effects on elastic modulus and fatigue life in equine bone10.1016/j.jbiomech.2004.12.002 ↗
32. Dahl, A., and Thompson, M. (2011). Mechanobiology of Bone. Comprehensive Biotechnology, Academic Press. [2nd ed.].10.1016/B978-0-444-64046-8.00285-8 ↗
33. Analysis of the Effect of Osteon Diameter on the Potential Relationship of Osteocyte Lacuna Density and Osteon Wall Thickness10.1002/ar.21452 ↗
34. Composition of trabecular and cortical bone10.1002/ar.1091490303 ↗
35. Hardness, an indicator of the mechanical competence of cancellous bone10.1002/jor.1100070518 ↗
36. Cowin, S.C. (1988). Bone Mechanics, CRC Press.
37. Non-interacting modes for stress, strain and energy in anisotropic hard tissue10.1016/0021-9290(91)90311-A ↗
38. Micro-scale modelling of bovine cortical bone fracture: Analysis of crack propagation and microstructure using X-FEM10.1016/j.commatsci.2011.01.021 ↗
39. Novel surgical machining via an impact cutting method based on fracture analysis with a discontinuum bone model10.1016/j.cirp.2017.04.028 ↗
40. Bone Mechanical Properties in Healthy and Diseased States10.1146/annurev-bioeng-062117-121139 ↗
41. Comparison of the structure and mechanical properties of bovine femur bone and ant-ler of the North American elk (Cervus elaphus canadensis)10.1016/j.actbio.2008.09.011 ↗
42. Bone apatite anisotropic structure control via designing fibrous scaffolds10.1039/D0RA01295E ↗
43. The Effects of Freezing on the Mechanical Properties of Bone10.2174/1876525401204010014 ↗
44. Effect of long-term preservation on the mechanical properties of cortical bone in goats10.1080/17453670810016759 ↗
45. Biomechanical properties and thermal characteristics of frozen versus thawed whole bone10.1177/0954411920929455 ↗
46. Porosity and cutting forces: From macroscale to microscale machining correlations10.1177/2041297510394057 ↗
47. A new value for Johnson Cook damage limit criterion in machining with large negative rake angle as basis for understanding of grinding10.1016/j.jmatprotec.2016.03.009 ↗
48. Burrs—Analysis, control and removal10.1016/j.cirp.2009.09.004 ↗
49. Tool-chip friction in machining with a large negative rake angle tool10.1016/j.wear.2004.09.047 ↗
50. Zawadzki, P. (2021). Proposal for a Novel Abrasive Machining Method for Preparing the Surface of Periarticular Tissue during Orthopedic Surgery on Hip Joints. J. Funct. Biomater., 12.10.3390/jfb12030050 ↗