The Influence of Thermocycling and Ultraviolet Aging on Surface Characteristics and the Repair Bond Strength of CAD/CAM Resin Nanoceramics
Source abstract
Abstract
Background: The durability of computer-aided design/computer-aided manufacturing (CAD/CAM) resin nanoceramics in the oral environment is influenced by aging factors such as thermocycling and ultraviolet (UV) exposure. This study investigates the impact of these aging processes on surface characteristics and repair bond strength. Methods: CAD/CAM resin nanoceramic samples were divided into the following five groups: control (non-aged), 1-year and 5-year thermocycling, and 1-year and 5-year UV aging (n = 12). For the thermocycling procedure, the parameters employed were a temperature range of 5–55 °C with dwell times of 20 s per bath and 10,000 and 50,000 cycles; for the ultraviolet aging process, the parameters were established at a wavelength of 340 nm, an intensity of 0.55 W/m², and durations of 300 h and 1500 h. Surface roughness, microhardness, and repair bond strength were analyzed through profilometry, Vickers microhardness testing, and shear bond strength assessment, respectively. SEM, AFM, and XRD analyses were performed for structural evaluation. Results: Both thermocycling and UV aging significantly increased surface roughness (p < 0.001) while reducing microhardness and repair bond strength (p < 0.001). UV aging had a more pronounced effect, particularly after five years, leading to the highest surface roughness (Ra: 61.77 μm; Rz: 271.57 μm) and lowest microhardness properties (63.13). EDAX analysis indicated matrix degradation and an increase in inorganic filler exposure. Conclusions: Aging significantly affects the surface characteristics of CAD/CAM resin nanoceramics, with UV aging exhibiting the most detrimental impact. These findings highlight the necessity of considering long-term material stability in dentistry.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Dental materials and restorations · Dental Research and COVID-19 · Dental Erosion and Treatment
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Prosthodontics, University of Van Yuzuncu Yil, Van 65080, Turkey
Department of Restorative Dentistry, University of Van Yuzuncu Yil, Van 65080, Turkey
Department of Prosthodontics, University of Dicle, Diyarbakır 21300, Turkey
References (43)
Show source-provided references
1. Evaluation of the response of esthetic restorative materials to ultraviolet aging10.1016/j.prosdent.2020.09.007 ↗
2. Advancements in CAD/CAM technology: Options for practical implementation10.1016/j.jpor.2016.01.003 ↗
3. Effect of UV aging on translucency of currently used esthetic CAD-CAM materials10.1111/jerd.12460 ↗
4. Materials for chairside CAD/CAM restorations
5. Repair bond strength of resin composite to three aged CAD/CAM blocks using different repair systems10.4047/jap.2020.12.3.131 ↗
6. Fatigue resistance and microleakage of CAD/CAM ceramic and composite molar crowns10.1111/j.1532-849X.2011.00773.x ↗
7. Effect of Aging on Stained Monolithic Resin-Ceramic CAD/CAM Materials: Quantitative and Qualitative Analysis of Surface Roughness
8. Bond strength of novel CAD/CAM restorative materials to self-adhesive resin cement: The effect of surface treatments
9. Tensile bond strength of PMMA- and composite-based CAD/CAM materials to luting cements after different conditioning methods10.1016/j.ijadhadh.2013.06.003 ↗
10. Mechanical properties of composite resin blocks for CAD/CAM10.4012/dmj.2014-208 ↗
11. The Effect of Surface Treatments on the Mechanical and Optical Behaviors of CAD/CAM Restorative Materials
12. Effect of surface treatments on shear bond strength of resin composite bonded to CAD/CAM resin-ceramic hybrid materials10.4047/jap.2016.8.4.259 ↗
13. Influence of different universal adhesives on the repair performance of hybrid CAD-CAM materials10.5395/rde.2019.44.e23 ↗
14. Fracture Toughness Analysis of Ceramic and Resin Composite CAD/CAM Material10.2341/18-161-L ↗
15. Effect of acidic solutions on the surface degradation of a micro-hybrid composite resin10.1590/0103-6440201300058 ↗
16. Factors involved in mechanical fatigue degradation of dental resin composites10.1177/0022034513490734 ↗
17. Shear bond strengths of aged and non-aged CAD/CAM materials after different surface treatments10.4047/jap.2020.12.5.273 ↗
18. Effect ofartificial accelerated aging on color stability and surface roughness of indirect composites
19. Does artificial aging affect mechanical properties of CAD/CAM composite materials10.1016/j.jpor.2017.06.001 ↗
20. The effect of artificial accelerated aging on the color stability, microhardness, and surface roughness of different dental laminate veneer materials10.1111/jerd.12567 ↗
21. In vitro color stability of double-layer veneers after accelerated aging10.1067/mpr.2001.115385 ↗
22. Optical behaviors of esthetic CAD-CAM restorations after different surface finishing and polishing procedures and UV aging: An in vitro study10.1016/j.prosdent.2017.09.019 ↗
23. Mechanical properties of new composite restorative materials10.1002/1097-4636(2000)53:4<353::AID-JBM9>3.0.CO;2-B ↗
24. Oja, J., Lassila, L., Vallittu, P.K., and Garoushi, S. (2021). Effect of Accelerated Aging on Some Mechanical Properties and Wear of Different Commercial Dental Resin Composites. Materials, 14.10.3390/ma14112769 ↗
25. Academy of Dental Materials guidance on in vitro testing of dental composite bonding effectiveness to dentin/enamel using micro-tensile bond strength (μTBS) approach10.1016/j.dental.2016.11.015 ↗
26. Polishing for glass ceramics: Which protocol?10.1016/j.jpor.2014.02.001 ↗
27. (2019). Dentistry—Polymer-Based Restorative Materials (Standard No. ISO 4049:2019).
28. Mechanical degradation of contemporary CAD/CAM resin composite materials after water ageing10.1016/j.dental.2021.04.002 ↗
29. Effect of aging on color, gloss and surface roughness of CAD/CAM composite materials10.1016/j.jdent.2023.104423 ↗
30. Atasoy, S., Karademir, S.A., Akarsu, S., and Sert, Y. Effects of post-polymerization on stainability and surface roughness of 3D printed composite resin. J. Prosthet. Dent., 2025. in press.10.1016/j.prosdent.2025.02.018 ↗
31. Effect of Aging Regimens on Resin Nanoceramic Chairside CAD/CAM Material10.1111/jopr.12408 ↗
32. Repair bond strength of resin composite to CAD/CAM glass-ceramic: Influence of cleaning methods, surface treatments, and aging10.1016/j.jdent.2025.105568 ↗
33. Effect of Different In Vitro Aging Methods on Color Stability of a Dental Resin-Based Composite Using CIELAB and CIEDE2000 Color-Difference Formulas10.1111/jerd.12155 ↗
34. Effects of thermal and mechanical cycling on the mechanical strength and surface properties of dental CAD-CAM restorative materials10.1016/j.prosdent.2020.11.014 ↗
35. Color stability of recent composite resins10.1007/s10266-016-0234-9 ↗
36. Szczesio-Wlodarczyk, A., Kopacz, K., Ranoszek-Soliwoda, K., Sokolowski, J., and Bociong, K. (2025). Towards the Standardization of Artificial Aging Protocols for Dental Composites: Evaluation of Proposed Methods. J. Funct. Biomater., 16.10.3390/jfb16020049 ↗
37. The influence of different storage media on Vickers hardness and surface roughness of CAD/CAM resin composites10.1007/s10856-023-06713-7 ↗
38. Guo, X., Yu, Y., Gao, S., Zhang, Z., and Zhao, H. (2022). Biodegradation of Dental Resin-Based Composite-A Potential Factor Affecting the Bonding Effect: A Narrative Review. Biomedicines, 10.10.3390/biomedicines10092313 ↗
39. Effect of storage conditions on mechanical properties of resin composite blanks for CAD/CAM crowns10.4012/dmj.2019-202 ↗
40. Influence of different surface treatments and universal adhesives on the repair of CAD-CAM composite resins: An in vitro study10.1016/j.prosdent.2020.02.029 ↗
41. Bond strength between composite repair and polymer-infiltrated ceramic-network material: Effect of different surface treatments10.1111/jerd.12445 ↗
42. Effect of Surface Treatments on the Bond Strength of Computer-aided Design and Computer-aided Manufacturing Lithium Disilicate to Restorative Materials: A Systematic Review
43. Effect of different repair methods on the bond strength of resin composite to CAD/CAM materials and microorganisms adhesion: An in situ study10.1016/j.jdent.2019.103266 ↗