Reinforcement of Hydrogels with a 3D-Printed Polycaprolactone (PCL) Structure Enhances Cell Numbers and Cartilage ECM Production under Compression
Source abstract
Abstract
Hydrogels show promise in cartilage tissue engineering (CTE) by supporting chondrocytes and maintaining their phenotype and extracellular matrix (ECM) production. Under prolonged mechanical forces, however, hydrogels can be structurally unstable, leading to cell and ECM loss. Furthermore, long periods of mechanical loading might alter the production of cartilage ECM molecules, including glycosaminoglycans (GAGs) and collagen type 2 (Col2), specifically with the negative effect of stimulating fibrocartilage, typified by collagen type 1 (Col1) secretion. Reinforcing hydrogels with 3D-printed Polycaprolactone (PCL) structures offer a solution to enhance the structural integrity and mechanical response of impregnated chondrocytes. This study aimed to assess the impact of compression duration and PCL reinforcement on the performance of chondrocytes impregnated with hydrogel. Results showed that shorter loading periods did not significantly affect cell numbers and ECM production in 3D-bioprinted hydrogels, but longer periods tended to reduce cell numbers and ECM compared to unloaded conditions. PCL reinforcement enhanced cell numbers under mechanical compression compared to unreinforced hydrogels. However, the reinforced constructs seemed to produce more fibrocartilage-like, Col1-positive ECM. These findings suggest that reinforced hydrogel constructs hold potential for in vivo cartilage regeneration and defect treatment by retaining higher cell numbers and ECM content. To further enhance hyaline cartilage ECM formation, future studies should focus on adjusting the mechanical properties of reinforced constructs and exploring mechanotransduction pathways.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Osteoarthritis Treatment and Mechanisms · 3D Printing in Biomedical Research · Total Knee Arthroplasty Outcomes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Division of Biomedical Engineering, College of Engineering, University of Saskatchewan, Saskatoon, SK S7N 5A9, Canada
Department of Mechanical Engineering, College of Engineering, University of Saskatchewan, Saskatoon, SK S7N 5A9, Canada
Department of Anatomy, Physiology, and Pharmacology, University of Saskatchewan, Saskatoon, SK S7N 5E5, Canada
Funding
University of Saskatchewan Devolved Graduate Scholarship · University of Saskatchewan CoMBRIDGE grant · Natural Sciences and Engineering Research Council of Canada (NSERC)
References (77)
Show source-provided references
1. Hydrogel biomaterials: A smart future?10.1016/j.biomaterials.2007.07.044 ↗
2. Compressive mechanical properties and microstructure of PVA–HA hydrogels for cartilage repair10.1039/C6RA02166B ↗
3. Fabrication of chitosan/alginate/hydroxyapatite hybrid scaffolds using 3D printing and impregnating techniques for potential cartilage regeneration10.1016/j.ijbiomac.2022.01.201 ↗
4. Recent advances in hydrogels for cartilage tissue engineering10.22203/eCM.v033a05 ↗
5. 3D printing of porous cell-laden hydrogel constructs for potential applications in cartilage tissue engineering10.1021/acsbiomaterials.6b00258 ↗
6. Biopolymer-based hydrogels for cartilage tissue engineering10.1021/cr100123h ↗
7. Alginate based scaffolds for cartilage tissue engineering: A review10.1080/00914037.2018.1562924 ↗
8. Salati, M.A., Khazai, J., Tahmuri, A.M., Samadi, A., Taghizadeh, A., Taghizadeh, M., Zarrintaj, P., Ramsey, J.D., Habibzadeh, S., and Seidi, F. (2020). Agarose-based biomaterials: Opportunities and challenges in cartilage tissue engineering. Polymers, 12.10.3390/polym12051150 ↗
9. Collagen scaffolds in cartilage tissue engineering and relevant approaches for future development10.1007/s13770-018-0135-9 ↗
10. Functional role of crosslinking in alginate scaffold for drug delivery and tissue engineering: A review10.1016/j.eurpolymj.2021.110807 ↗
11. 3D bioprinting human chondrocytes with nanocellulose–alginate bioink for cartilage tissue engineering applications10.1021/acs.biomac.5b00188 ↗
12. Dynamic compressive loading enhances cartilage matrix synthesis and distribution and suppresses hypertrophy in hMSC-laden hyaluronic acid hydrogels10.1089/ten.tea.2011.0455 ↗
13. Analyzing biological performance of 3D-printed, cell-impregnated hybrid constructs for cartilage tissue engineering10.1089/ten.tec.2015.0307 ↗
14. Articular cartilage: Structure and regeneration10.1089/ten.teb.2010.0191 ↗
15. Fabrication of supramolecular hydrogels for drug delivery and stem cell encapsulation10.1021/la8006876 ↗
16. Strategic design and fabrication of engineered scaffolds for articular cartilage repair10.3390/jfb3040799 ↗
17. Biomaterials for integration with 3-D bioprinting10.1007/s10439-014-1207-1 ↗
18. You, F., Eames, B.F., and Chen, X. (2017). Application of extrusion-based hydrogel bioprinting for cartilage tissue engineering. Int. J. Mol. Sci., 18.10.3390/ijms18071597 ↗
19. 3D printing of porous alginate/gelatin hydrogel scaffolds and their mechanical property characterization10.1080/00914037.2016.1201830 ↗
20. Yazdanpanah, Z., Johnston, J.D., Cooper, D.M., and Chen, X. (2022). 3D bioprinted scaffolds for bone tissue engineering: State-of-the-art and emerging technologies. Front. Bioeng. Biotechnol., 10.10.3389/fbioe.2022.824156 ↗
21. 3D biofabrication of vascular networks for tissue regeneration: A report on recent advances10.1016/j.jpha.2018.08.005 ↗
22. A brief review of extrusion-based tissue scaffold bio-printing10.1002/biot.201600671 ↗
23. Printability—A key issue in extrusion-based bioprinting10.1016/j.jpha.2021.02.001 ↗
24. Extrusion-based printing of chitosan scaffolds and their in vitro characterization for cartilage tissue engineering10.1016/j.ijbiomac.2020.08.180 ↗
25. Yang, X., Li, S., Ren, Y., Qiang, L., Liu, Y., Wang, J., and Dai, K. (2022). 3D printed hydrogel for articular cartilage regeneration. Compos. Part B Eng., 109863.10.1016/j.compositesb.2022.109863 ↗
26. Huang, J., Xiong, J., Wang, D., Zhang, J., Yang, L., Sun, S., and Liang, Y. (2021). 3D bioprinting of hydrogels for cartilage tissue engineering. Gels, 7.10.3390/gels7030144 ↗
27. 3D printed cell-laden collagen and hybrid scaffolds for in vivo articular cartilage tissue regeneration10.1016/j.jiec.2018.05.049 ↗
28. Alizadeh Sardroud, H., Chen, X., and Eames, B.F. (2023). Applied Compressive Strain Governs Hyaline-like Cartilage versus Fibrocartilage-like ECM Produced within Hydrogel Constructs. Int. J. Mol. Sci., 24.10.3390/ijms24087410 ↗
29. Hybrid printing of mechanically and biologically improved constructs for cartilage tissue engineering applications10.1088/1758-5082/5/1/015001 ↗
30. Modulating mechanical behaviour of 3D-printed cartilage-mimetic PCL scaffolds: Influence of molecular weight and pore geometry10.1088/1758-5090/8/2/025020 ↗
31. Bothe, F., Deubel, A.-K., Hesse, E., Lotz, B., Groll, J., Werner, C., Richter, W., and Hagmann, S. (2019). Treatment of focal cartilage defects in minipigs with zonal chondrocyte/mesenchymal progenitor cell constructs. Int. J. Mol. Sci., 20.10.3390/ijms20030653 ↗
32. 3D printed bioresorbable scaffolds for articular cartilage tissue engineering: A comparative study between neat polycaprolactone (PCL) and poly (lactide-b-ethylene glycol)(PLA-PEG) block copolymer10.1088/1748-605X/ac78b7 ↗
33. 3D printed PCL/GelMA biphasic scaffold boosts cartilage regeneration using co-culture of mesenchymal stem cells and chondrocytes: In vivo study10.1016/j.matdes.2021.110065 ↗
34. Development of a hybrid scaffold with synthetic biomaterials and hydrogel using solid freeform fabrication technology10.1088/1758-5082/3/3/034102 ↗
35. Reinforcement of hydrogels using three-dimensionally printed microfibres10.1038/ncomms7933 ↗
36. 3D printing of fibre-reinforced cartilaginous templates for the regeneration of osteochondral defects10.1016/j.actbio.2020.05.040 ↗
37. Shear viscoelasticity of electrospinning PCL nanofibers reinforced alginate hydrogels10.1088/2053-1591/abfb28 ↗
38. Mechanical confinement regulates cartilage matrix formation by chondrocytes10.1038/nmat4993 ↗
39. Bi-layered micro-fibre reinforced hydrogels for articular cartilage regeneration10.1016/j.actbio.2019.06.030 ↗
40. Modulating degradation of sodium alginate/bioglass hydrogel for improving tissue infiltration and promoting wound healing10.1016/j.bioactmat.2021.03.038 ↗
41. A novel bioreactor system for biaxial mechanical loading enhances the properties of tissue-engineered human cartilage10.1038/s41598-017-16523-x ↗
42. The microfracture technique for the treatment of articular cartilage lesions in the knee: A prospective cohort study10.2106/00004623-200509000-00002 ↗
43. The resurfacing of adult rabbit articular cartilage by multiple perforations through the subchondral bone10.2106/00004623-197658020-00012 ↗
44. A method of resurfacing osteoarthritic knee joint
45. Cell-laden and cell-free biopolymer hydrogel for the treatment of osteochondral defects in a sheep model10.1089/ten.tea.2008.0087 ↗
46. Fibrin–polyurethane composites for articular cartilage tissue engineering: A preliminary analysis10.1089/ten.2005.11.1562 ↗
47. Matrix-associated implantation of predifferentiated mesenchymal stem cells versus articular chondrocytes: In vivo results of cartilage repair after 1 year10.1177/0363546511398646 ↗
48. Cartilage tissue engineering approaches need to assess fibrocartilage when hydrogel constructs are mechanically loaded
49. Biophysical stimuli: A review of electrical and mechanical stimulation in hyaline cartilage10.1177/1947603517730637 ↗
50. Analysis of radial variations in material properties and matrix composition of chondrocyte-seeded agarose hydrogel constructs10.1016/j.joca.2008.05.019 ↗
51. ATDC5: An excellent in vitro model cell line for skeletal development10.1002/jcb.24467 ↗
52. Using synchrotron radiation inline phase-contrast imaging computed tomography to visualize three-dimensional printed hybrid constructs for cartilage tissue engineering10.1107/S1600577516002344 ↗
53. In vivo measurement of localized tibiofemoral cartilage strains in response to dynamic activity10.1177/0363546514559821 ↗
54. The effect of chondroitin sulphate and hyaluronic acid on chondrocytes cultured within a fibrin-alginate hydrogel10.3390/jfb5030197 ↗
55. Collagen-alginate as bioink for three-dimensional (3D) cell printing based cartilage tissue engineering10.1016/j.msec.2017.09.002 ↗
56. Enhanced MSC chondrogenesis following delivery of TGF-β3 from alginate microspheres within hyaluronic acid hydrogels in vitro and in vivo10.1016/j.biomaterials.2011.05.033 ↗
57. Effect of growth factors on chondrogenic differentiation of rabbit mesenchymal cells embedded in injectable hydrogels10.1263/jbb.106.74 ↗
58. Simvastatin enhances VEGF production and ameliorates impaired wound healing in experimental diabetes10.1016/j.phrs.2008.01.005 ↗
59. A tough double network hydrogel for cartilage tissue engineering10.1039/c3tb20600a ↗
60. Chuang, E.-Y., Chiang, C.-W., Wong, P.-C., and Chen, C.-H. (2018). Hydrogels for the application of articular cartilage tissue engineering: A review of hydrogels. Adv. Mater. Sci. Eng., 2018.10.1155/2018/4368910 ↗
61. Effects of dynamic compressive loading on chondrocyte biosynthesis in self-assembling peptide scaffolds10.1016/j.jbiomech.2003.10.005 ↗
62. Dynamic compression modulates chondrocyte proliferation and matrix biosynthesis in chitosan/gelatin scaffolds10.1002/jbm.b.31384 ↗
63. Biosynthetic response of passaged chondrocytes in a type II collagen scaffold to mechanical compression
64. The influence of mechanical loading on isolated chondrocytes seeded in agarose constructs
65. Differential response of adult and embryonic mesenchymal progenitor cells to mechanical compression in hydrogels10.1634/stemcells.2007-0228 ↗
66. Dynamic mechanical compression of chondrocytes for tissue engineering: A critical review10.3389/fbioe.2017.00076 ↗
67. Dynamic compression improves biosynthesis of human zonal chondrocytes from osteoarthritis patients10.1016/j.joca.2012.04.019 ↗
68. Mechanical loading regimes affect the anabolic and catabolic activities by chondrocytes encapsulated in PEG hydrogels10.1016/j.joca.2009.08.005 ↗
69. Simultaneous anabolic and catabolic responses of human chondrocytes seeded in collagen hydrogels to long-term continuous dynamic compression10.1016/j.aanat.2011.12.008 ↗
70. Mechanical compression alters gene expression and extracellular matrix synthesis by chondrocytes cultured in collagen I gels10.1016/S0142-9612(01)00245-9 ↗
71. The role of hydrogel structure and dynamic loading on chondrocyte gene expression and matrix formation10.1016/j.jbiomech.2008.02.034 ↗
72. Articular cartilage: From formation to tissue engineering10.1039/C6BM00068A ↗
73. Dynamic mechanical loading facilitated chondrogenic differentiation of rabbit BMSCs in collagen scaffolds10.1093/rb/rbz005 ↗
74. Enhanced chondrogenic phenotype of primary bovine articular chondrocytes in Fibrin-Hyaluronan hydrogel by multi-axial mechanical loading and FGF1810.1016/j.actbio.2020.01.032 ↗
75. Effects of cross-linking type II collagen-GAG scaffolds on chondrogenesis in vitro: Dynamic pore reduction promotes cartilage formation10.1089/ten.2006.12.1345 ↗
76. Modulation of mesenchymal stem cell chondrogenesis in a tunable hyaluronic acid hydrogel microenvironment10.1016/j.biomaterials.2012.01.065 ↗
77. Pericellular plasma clot negates the influence of scaffold stiffness on chondrogenic differentiation10.1016/j.actbio.2016.09.038 ↗