Poly (Butylene Succinate)/Silicon Nitride Nanocomposite with Optimized Physicochemical Properties, Biocompatibility, Degradability, and Osteogenesis for Cranial Bone Repair
Source abstract
Abstract
Congenital disease, tumors, infections, and trauma are the main reasons for cranial bone defects. Herein, poly (butylene succinate) (PB)/silicon nitride (Si3N4) nanocomposites (PSC) with Si3N4 content of 15 w% (PSC15) and 30 w% (PSC30) were fabricated for cranial bone repair. Compared with PB, the compressive strength, hydrophilicity, surface roughness, and protein absorption of nanocomposites were increased with the increase in Si3N4 content (from 15 w% to 30 w%). Furthermore, the cell adhesion, multiplication, and osteoblastic differentiation on PSC were significantly enhanced with the Si3N4 content increasing in vitro. PSC30 exhibited optimized physicochemical properties (compressive strength, surface roughness, hydrophilicity, and protein adsorption) and cytocompatibility. The m-CT and histological results displayed that the new bone formation for SPC30 obviously increased compared with PB, and PSC30 displayed proper degradability (75.3 w% at 12 weeks) and was gradually replaced by new bone tissue in vivo. The addition of Si3N4 into PB not only optimized the surface performances of PSC but also improved the degradability of PSC, which led to the release of Si ions and a weak alkaline environment that significantly promoted cell response and tissue regeneration. In short, the enhancements of cellular responses and bone regeneration of PSC30 were attributed to the synergism of the optimized surface performances and slow release of Si ion, and PSC30 were better than PB. Accordingly, PSC30, with good biocompatibility and degradability, displayed a promising and huge potential for cranial bone construction.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Bone Tissue Engineering Materials · Graphene and Nanomaterials Applications · Dental Implant Techniques and Outcomes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Institute for Regenerative Medicine, National Stem Cell Translational Resource Center, Shanghai East Hospital, School of Life Sciences and Technology, Tongji University, Shanghai 200092, China
Funding
Peak Disciplines (Type IV) of Institutions of Higher Learning in Shanghai
References (43)
Show source-provided references
1. The growth of the neurocranium: Literature review and implications in cranial repair10.1007/s00381-019-04193-1 ↗
2. A high-strength mineralized collagen bone scaffold for large-sized cranial bone defect repair in sheep10.1093/rb/rby020 ↗
3. Aghali, A. (2021). Craniofacial Bone Tissue Engineering: Current Approaches and Potential Therapy. Cell, 10.10.3390/cells10112993 ↗
4. Cranioplasty following severe traumatic brain injury: Role in neurorecovery10.1007/s11910-021-01147-6 ↗
5. Predictive factors of surgical site infection following cranioplasty: A study including 3D printed implants10.3389/fneur.2021.745575 ↗
6. Eggshell microparticle reinforced scaffolds for regeneration of critical sized cranial defects10.1021/acsami.1c19884 ↗
7. A biomimetic zinc alloy scaffold coated with brushite for enhanced cranial bone regeneration10.1021/acsbiomaterials.9b01895 ↗
8. Uceda, M.F.I., Sanchez-Casanova, S., Escudero-Duch, C., and Vilaboa, N. (2022). A Narrative review of cell-based approaches for cranial bone regeneration. Pharmaceutics, 14.10.3390/pharmaceutics14010132 ↗
9. Poly(lactic-co-glycolic acid)-based composite bone-substitute materials
10. Influence of the nanofiber chemistry and orientation of biodegradable poly(butylene succinate)-based scaffolds on osteoblast differentiation for bone tissue regeneration10.1039/C8NR00677F ↗
11. Penas, M.I., Perez-Camargo, R.A., Hernandez, R., and Muller, A.J. (2022). A review on current strategies for the modulation of thermomechanical, barrier, and biodegradation properties of poly (butylene succinate) (PBS) and its random copolymers. Polymers, 14.10.3390/polym14051025 ↗
12. Zarei, M., and El, F.M. (2021). Synthesis of hydrophilic poly (butylene succinate-butylene dilinoleate) (PBS-DLS) copolymers containing poly (ethylene glycol) (PEG) of variable molecular weights. Polymers, 13.10.3390/polym13183177 ↗
13. Biocompatibility and bioactivity of plasma-treated biodegradable poly(butylene succinate)10.1016/j.actbio.2008.07.017 ↗
14. Nanocomposites for bone tissue regeneration10.2217/nnm.13.44 ↗
15. Developing a novel magnesium glycerophosphate/silicate-based organic-inorganic composite cement for bone repair10.1016/j.msec.2018.03.001 ↗
16. Biodegradable polymer matrix nanocomposites for tissue engineering: A review10.1016/j.polymdegradstab.2010.06.007 ↗
17. Bioactive and biodegradable nanocomposites and hybrid biomaterials for bone regeneration10.3390/jfb3020432 ↗
18. Fibrin hydrogel incorporated with graphene oxide functionalized nanocomposite scaffolds for bone repair—In vitro and in vivo study10.1016/j.nano.2020.102251 ↗
19. Du, X.Y., Lee, S.S., Blugan, G., and Ferguson, S.J. (2022). Silicon nitride as a biomedical material: An overview. Int. J. Mol. Sci., 23.10.3390/ijms23126551 ↗
20. A hierarchical nanostructural coating of amorphous silicon nitride on polyetheretherketone with antibacterial activity and promoting responses of rBMSCs for orthopedic applications10.1039/C9TB01565E ↗
21. Silicon nitride, a bioceramic for bone tissue engineering: A reinforced cryogel system with antibiofilm and osteogenic effects10.3389/fbioe.2021.794586 ↗
22. Promoting osteoblasts responses in vitro and improving osteointegration in vivo through bioactive coating of nanosilicon nitride on polyetheretherketone
23. Antimicrobial, conductive, and mechanical properties of AgCB/PBS composite system10.1155/2019/3487529 ↗
24. Needle-free electrospinning of nanofibrillated cellulose and graphene nanoplatelets based sustainable poly (butylene succinate) nanofibers10.1016/j.mtchem.2020.100301 ↗
25. Tribological Performance of Si3N4-PTFE Composites Prepared by High-Pressure Compression Molding10.1080/10402004.2020.1742407 ↗
26. Bioactive glass-polymer nanocomposites for bone tissue regeneration applications: A review10.1002/adem.201900287 ↗
27. Regulation of an osteon-like concentric microgrooved surface on osteogenesis and osteoclastogenesis10.1016/j.biomaterials.2019.119269 ↗
28. Tricalcium phosphate sol-incorporated poly(ε-caprolactone) membrane with improved mechanical and osteoinductive activity as an artificial periosteum10.1021/acsbiomaterials.0c00511 ↗
29. Gaseous sulfur trioxide induced controllable sulfonation promoting biomineralization and osseointegration of polyetheretherketone implants
30. A comparative study of silicon nitride and SiAlON ceramics against E. coli10.1016/j.ceramint.2020.09.012 ↗
31. Magnesium/gallium-layered nanosheets on titanium implants mediate osteogenic differentiation of MSCs and osseointegration under osteoporotic condition10.1016/j.cej.2021.130982 ↗
32. Effect of bound water content on cell adhesion strength to water-insoluble polymers10.1016/j.actbio.2021.07.058 ↗
33. Wu, S.H., Xiao, Z.L., Song, J.L., Li, M., and Li, W.H. (2018). Evaluation of BMP-2 Enhances the osteoblast differentiation of human amnion mesenchymal stem cells seeded on nano-hydroxyapatite/collagen/poly(L-Lactide). Int. J. Mol. Sci., 19.10.3390/ijms19082171 ↗
34. The effect of LyPRP/collagen composite hydrogel on osteogenic differentiation of rBMSCs10.1093/rb/rbaa053 ↗
35. Effects of macropore size in carbonate apatite honeycomb scaffolds on bone regeneration10.1016/j.msec.2020.110848 ↗
36. Polydopamine-assisted anchor of chitosan onto porous composite scaffolds for accelerating bone regeneration10.1021/acsbiomaterials.9b00209 ↗
37. In vivo biocompatibility and osteogenesis of electrospun poly (ε-caprolactone)–poly (ethylene glycol)–poly (ε-caprolactone)/nano-hydroxyapatite composite scaffold10.1016/j.biomaterials.2012.08.023 ↗
38. Recent trends in the application of widely used natural and synthetic polymer nanocomposites in bone tissue regeneration10.1016/j.msec.2020.110698 ↗
39. Surface modification of aliphatic polyester to enhance biocompatibility10.3389/fbioe.2019.00098 ↗
40. Human osteoblasts grow transitional Si/N apatite in quickly osteointegrated Si3N4 cervical insert10.1016/j.actbio.2017.09.038 ↗
41. Tailored biomimetic hydrogel based on a photopolymerised DMP1/MCF/gelatin hybrid system for calvarial bone regeneration10.1039/C7TB02130E ↗
42. KUSA-A1 mesenchymal stem cells response to PEEK-Si3N4 composites10.1016/j.mtchem.2020.100316 ↗
43. Mechanical properties, microstructure, and bioactivity of β-Si3N4/HA composite ceramics for bone reconstruction10.1016/j.ceramint.2021.08.332 ↗